Proceedings of the 2017 International Conference on Manufacturing Engineering and Intelligent Materials (ICMEIM 2017)

Study on Lubrication Characteristics of Trapezoidal Groove for Planetary Gear Sliding Bearing

Authors
Hong-wei Wang, Kai Huang, Li-juan Sun
Corresponding Author
Hong-wei Wang
Available Online February 2017.
DOI
10.2991/icmeim-17.2017.95How to use a DOI?
Keywords
Sliding Bearing, Trapezoidal Groove, Finite Volume Method, Lubrication, Characteristics
Abstract

It has been proven to be an effective method for reducing the friction and wear of two contact surfaces by introducing a hydrodynamic lubrication mechanism. A linear trapezoidal groove was proposed to accommodate the bidirectional rotation of the planetary gear. Cavitation and fluid rotation centrifugal forces were analyzed by the finite control volume method. The influence of the structural parameters of the groove, such as profile inclination of trapezoidal groove, film thickness ratio, groove number and groove width ratio, on the hydrodynamic lubrication characteristics of the groove were investigated. The results show that an optimal interval value is existent for trapezoidal profile inclination, film thickness ratio and groove number, and simultaneously meeting the maximum bearing capacity and minimum friction coefficient for the fluid lubrication. The cross-sectional area of the groove and rotating centrifugal force have a great influence on the flow rate and cavitation rate of the oil film. When other parameters are unchanged, the trapezoidal profile inclination is better than that of the rectangular groove and the triangle groove in a certain range. The cavitation rate was commonly determined with the oil flow and centrifugal force, but the bearing capacity could be hardly influenced.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2017 International Conference on Manufacturing Engineering and Intelligent Materials (ICMEIM 2017)
Series
Advances in Engineering Research
Publication Date
February 2017
ISBN
10.2991/icmeim-17.2017.95
ISSN
2352-5401
DOI
10.2991/icmeim-17.2017.95How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Hong-wei Wang
AU  - Kai Huang
AU  - Li-juan Sun
PY  - 2017/02
DA  - 2017/02
TI  - Study on Lubrication Characteristics of Trapezoidal Groove for Planetary Gear Sliding Bearing
BT  - Proceedings of the 2017 International Conference on Manufacturing Engineering and Intelligent Materials (ICMEIM 2017)
PB  - Atlantis Press
SP  - 557
EP  - 567
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmeim-17.2017.95
DO  - 10.2991/icmeim-17.2017.95
ID  - Wang2017/02
ER  -