Proceedings of the Second International Conference on Mechanics, Materials and Structural Engineering (ICMMSE 2017)

Material Selection and Analysis of Oil Film Pressure for the Floating Ring Bearing of Turbocharger

Authors
Liqiang Peng, Huiping Zheng, Zhanqun Shi
Corresponding Author
Liqiang Peng
Available Online April 2017.
DOI
10.2991/icmmse-17.2017.21How to use a DOI?
Keywords
Turbocharger, Floating ring bearing, Oil film pressure, Dynamic characteristics
Abstract

Floating ring bearing has the characteristics of simple structure, low power consumption and high efficiency. It is suitable for high speed and light load occasions. It has been widely used in high speed rotating machinery such as turbo charger, aviation engine and so on. Firstly, the materials of each component of the turbocharger rotor system are selected. Secondly, parameterized model of turbocharger floating ring bearing was established by the software DyRoBes-Beperf, when ring ratio is constant analysis of oil film pressure distribution for floating ring bearing were conducted, and eccentricity, oil film stiffness, damping variation with speed. The calculation in this paper provides some reference for the design and analysis of the turbine rotor and the floating ring bearing.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the Second International Conference on Mechanics, Materials and Structural Engineering (ICMMSE 2017)
Series
Advances in Engineering Research
Publication Date
April 2017
ISBN
978-94-6252-370-8
ISSN
2352-5401
DOI
10.2991/icmmse-17.2017.21How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Liqiang Peng
AU  - Huiping Zheng
AU  - Zhanqun Shi
PY  - 2017/04
DA  - 2017/04
TI  - Material Selection and Analysis of Oil Film Pressure for the Floating Ring Bearing of Turbocharger
BT  - Proceedings of the Second International Conference on Mechanics, Materials and Structural Engineering (ICMMSE 2017)
PB  - Atlantis Press
SP  - 128
EP  - 133
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmmse-17.2017.21
DO  - 10.2991/icmmse-17.2017.21
ID  - Peng2017/04
ER  -