Proceedings of the 2019 1st International Conference on Engineering and Management in Industrial System (ICOEMIS 2019)

Defects Tracking Matrix for Plywood Industry Production based on House of Quality

Authors
Yustina Suhandini Tjahjaningsih, Misdiyanto, Ahmad Izzuddin
Corresponding Author
Yustina Suhandini Tjahjaningsih
Available Online November 2019.
DOI
10.2991/icoemis-19.2019.21How to use a DOI?
Keywords
Quality Control, Defect Tracking Matrix (DTM), Particle Board
Abstract

Problems in the industry with the mass customization system are quite complex because of the frequent reconfiguration by the changes of production process systems according to customer orders, so quality assurance is demanded to be more accurate according to the number of different part types and the interruption of the information flow about quality with each reconfiguration of the system. This study aims to build a model of quality control systems that are capable of detecting product defects by quickly adjusting changes in production lines according to customer desires. The method used to detect product defects is Defect Tracking Matrix (DTM). DTM connects manufacturing techniques with direct quality defects. This allows finding the cause of quality defects quickly. The quality control model that was built was applied to the Plywood Industry in Probolinggo, PT Kutai Timber Indonesia (KTI) in the Particle Board Division. Product variations are based on density, glue type, thickness, size, and wood type. There are 12 stages of the process in producing particle boards before being sent to customers. Product defects that often occur are in the cut to size and sanding process so that the specific DTM module is carried out in its. There are 12 stages of the production process of particle boards before being sent to customers. Product defects that often occur are in the Cut to Size and Sanding process so that the specific DTM module is carried out in its. There are 18 techniques attributes (TAs) that represent the manufacturing process module and 16 quality defects (QDs) in the Ply Wood Industry with sample of particle board process. The procedure of DTM is usefull to detect defect faster than usually.

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2019 1st International Conference on Engineering and Management in Industrial System (ICOEMIS 2019)
Series
Advances in Intelligent Systems Research
Publication Date
November 2019
ISBN
10.2991/icoemis-19.2019.21
ISSN
1951-6851
DOI
10.2991/icoemis-19.2019.21How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yustina Suhandini Tjahjaningsih
AU  - Misdiyanto
AU  - Ahmad Izzuddin
PY  - 2019/11
DA  - 2019/11
TI  - Defects Tracking Matrix for Plywood Industry Production based on House of Quality
BT  - Proceedings of the 2019 1st International Conference on Engineering and Management in Industrial System (ICOEMIS 2019)
PB  - Atlantis Press
SP  - 146
EP  - 154
SN  - 1951-6851
UR  - https://doi.org/10.2991/icoemis-19.2019.21
DO  - 10.2991/icoemis-19.2019.21
ID  - Tjahjaningsih2019/11
ER  -