Proceedings of the 2019 1st International Conference on Engineering and Management in Industrial System (ICOEMIS 2019)

Parameter Optimization of Tray Dryer Machine Endless Chain Pressure (ECP) with Taguchi Method at PT PN VIII Purwakarta

Authors
Yonatan Pranata, Mira Rahayu, Erna Febriyanti
Corresponding Author
Yonatan Pranata
Available Online November 2019.
DOI
10.2991/icoemis-19.2019.52How to use a DOI?
Keywords
Taguchi Method, Computational Fluid Dynamic, Static Structural, Tray, Stress’s score
Abstract

PT. Perkebunan Nusantara is a company that produce black tea. One of the step to make black tea is the process of drying tea leaves to have a water content of 2.5% - 3%. The company use Endless Chain Pressure (ECP) type machine.Inside the ECP machine there is a tray where the tea will be dried. Tray that use today is often broken in certain location. This study goal is to look for factors that affect the broken traywith Taguchi Method. The factorsare adjusted to the company’s standard operational procedure in order to maintain the product. The factors use are drying time, inlet temperature, and inlet velocity. Base on orthogonal array L16(43)so that the experiment was obtained 16 times. Each experiment was conducted twice, Computational Fluid Dynamic (CFD) and Static Structural. The experiment result be analyze using S/N Ratio smaller the better and ANOVA. It is known that the optimum factor for tea drying machine tray are time level 1 at 1200s; inlet temperature level 1 at369.25K, and inlet velocity at16m/s and 24m/s with stress’s score 485.32 MPa. The ANOVA test results showed a significant factor in this study is inlet temperature with P-value close to zero but not zero.

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2019 1st International Conference on Engineering and Management in Industrial System (ICOEMIS 2019)
Series
Advances in Intelligent Systems Research
Publication Date
November 2019
ISBN
10.2991/icoemis-19.2019.52
ISSN
1951-6851
DOI
10.2991/icoemis-19.2019.52How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yonatan Pranata
AU  - Mira Rahayu
AU  - Erna Febriyanti
PY  - 2019/11
DA  - 2019/11
TI  - Parameter Optimization of Tray Dryer Machine Endless Chain Pressure (ECP) with Taguchi Method at PT PN VIII Purwakarta
BT  - Proceedings of the 2019 1st International Conference on Engineering and Management in Industrial System (ICOEMIS 2019)
PB  - Atlantis Press
SP  - 380
EP  - 386
SN  - 1951-6851
UR  - https://doi.org/10.2991/icoemis-19.2019.52
DO  - 10.2991/icoemis-19.2019.52
ID  - Pranata2019/11
ER  -