Proceedings of the International Symposium "Engineering and Earth Sciences: Applied and Fundamental Research" dedicated to the 85th anniversary of H.I. Ibragimov (ISEES 2019)

Automatic Winding Machine for Repairing of Wells with Electric Centrifugal Pumps

Authors
M.L. Galimullin, M.Y. Khabibullin, R.I. Suleimanov
Corresponding Author
M.L. Galimullin
Available Online August 2019.
DOI
https://doi.org/10.2991/isees-19.2019.139How to use a DOI?
Keywords
automatic winding machine; underground repair; oil well; cable; installation of ECP electric centrifugal pumps.
Abstract

The article deals with the results of field testings of the automatic winding machine for ECP cable in the process of down-lifting operations in the underground and overhaul repair of oil wells at the fields of Joint-Stock Oil Company Bashneft. During the overhaul or underground repair of oil wells equipped with ECP centrifugal pump installations, the mounting of the KRBK cable to the tubing body with special clamps is added to the technological process. This process requires stopping the process of lowering the tubing string. Thus, in the process of lowering the tubing string into the well, a synchronous operation of the mechanisms is necessary: cable feed (KRBK automatic winding maschine) and the mechanism of movement of NK pipes. Taking into account the requirements of safety and porvision of integrity and serviceability of the KRBK cable in the process of down-lifting operations in the underground and overhaul repair of oil wells, smooth stopping and starting of automatic winding maschine is necessery, as well as the synchronous operation of the KRBK automatic winding maschine and the system of lifting and lowering the column of the tubing. Abrupt stopping and starting of the work of automatic winding maschine leads to tension and overvoltage of the cable, which is unacceptable and can lead to destruction of the cable as a whole (breakage, violation of insulation, integrity). For starting and stopping the cable drum (7-8 tons) the following is necessary: a sufficiently large power of the electric motor; gearbox. Moreover, the moment of inertia of the untwisted cable drum is long enough, which is the cause of failure of the gearbox, electric motor and belt drive. Considering the above said, the article proposes the kinematics of the automatic winding machine, which has passed field testings and allows smooth, synchronous operation being done, aas well as eliminating damage of the KRBK cable and optimizing the expenses of maintenance and repair of the automatic winding machine.

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Symposium "Engineering and Earth Sciences: Applied and Fundamental Research" dedicated to the 85th anniversary of H.I. Ibragimov (ISEES 2019)
Series
Atlantis Highlights in Material Sciences and Technology
Publication Date
August 2019
ISBN
978-94-6252-769-0
ISSN
2590-3217
DOI
https://doi.org/10.2991/isees-19.2019.139How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - M.L. Galimullin
AU  - M.Y. Khabibullin
AU  - R.I. Suleimanov
PY  - 2019/08
DA  - 2019/08
TI  - Automatic Winding Machine for Repairing of Wells with Electric Centrifugal Pumps
BT  - Proceedings of the International Symposium "Engineering and Earth Sciences: Applied and Fundamental Research" dedicated to the 85th anniversary of H.I. Ibragimov (ISEES 2019)
PB  - Atlantis Press
SP  - 125
EP  - 129
SN  - 2590-3217
UR  - https://doi.org/10.2991/isees-19.2019.139
DO  - https://doi.org/10.2991/isees-19.2019.139
ID  - Galimullin2019/08
ER  -