Proceedings of the 2015 International Symposium on Energy Science and Chemical Engineering

The Usage of Technology and Manufacturing in the Service of Design

Authors
Jun Wang, Zhihui Wu
Corresponding Author
Jun Wang
Available Online December 2015.
DOI
10.2991/isesce-15.2015.55How to use a DOI?
Keywords
design; polymer; fiberglass; technology
Abstract

In this paper the system for advanced technology for furniture design and manufacturing is described. The polymer is adopted to specify the product models. The material allows simultaneous access to the design. Computer integrated technology can vary the design model and process planning. With the help of technology the design may obtain a wider selection in width and depth. The paper made a further analysis on the basis of three furniture design cases, so as to show the application of technology and manufacturing in the service of design.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 International Symposium on Energy Science and Chemical Engineering
Series
Advances in Engineering Research
Publication Date
December 2015
ISBN
978-94-6252-140-7
ISSN
2352-5401
DOI
10.2991/isesce-15.2015.55How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Jun Wang
AU  - Zhihui Wu
PY  - 2015/12
DA  - 2015/12
TI  - The Usage of Technology and Manufacturing in the Service of Design
BT  - Proceedings of the 2015 International Symposium on Energy Science and Chemical Engineering
PB  - Atlantis Press
SP  - 273
EP  - 276
SN  - 2352-5401
UR  - https://doi.org/10.2991/isesce-15.2015.55
DO  - 10.2991/isesce-15.2015.55
ID  - Wang2015/12
ER  -