Research of the Technology on internal rib and bulging forming
- DOI
- 10.2991/meic-15.2015.17How to use a DOI?
- Keywords
- internal rib; stiffness; slapping; die fillet; bulging forming
- Abstract
The forming of internal rib has more application in production, to meet the requirements of assembly, cooperate or increase the stiffness, it can be realized through the use of compressed coil or bulging coil tube forming rib forming, within or outside of the rib. It is for ribbed tube forming of schematic diagram, and it is rib for discharge voltage and pressure die fillet radius of rib, rib forming of depth is with the increase of discharge voltage, and pressure increases is with the increase of die radius, especially the influence of voltage is far greater than the radius.When the discharge voltage is from 5 kv to 6 kv, rib depth increases obviously, local bulging forming is mainly not by right now, but rely on external metal flow.
- Copyright
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Ping He PY - 2015/04 DA - 2015/04 TI - Research of the Technology on internal rib and bulging forming BT - Proceedings of the 2015 International Conference on Mechatronics, Electronic, Industrial and Control Engineering PB - Atlantis Press SP - 67 EP - 70 SN - 2352-5401 UR - https://doi.org/10.2991/meic-15.2015.17 DO - 10.2991/meic-15.2015.17 ID - He2015/04 ER -