Proceedings of the 1st International Conference on Mechanical Engineering and Material Science (MEMS 2012)

Orthogonal Experiments for Effect of Components on Performance Parameters of Green Sand for High Density Moulding

Authors
GAO Guili, SHI Dequan, WANG Lihua
Corresponding Author
GAO Guili
Available Online December 2012.
DOI
10.2991/mems.2012.125How to use a DOI?
Keywords
Orthogonal experiment; component optimization; green sand; compactability; permeability
Abstract

Under considering the interaction of the factors, the effects of the clay content, moisture content and coal content on the compactibility, permeability, green compressive strength and shatter index of green sand for high density moulding have been studied according to the orthogonal experimental method. The experimental results lead to the following conclusions. The optimal combination is that the clay content is 8%, the moisture content is 3.2% and the coal content is 5%. The moisture content is the strongest factor affecting the compactibility and permeability. The clay content is the most significant factor affecting the green compressive strength and shatter index. The interaction between the clay content and moisture content has key effect on the permeability, green compressive strength and shatter index, so the optimal ration of the clay content and the moisture content must be achieved. The effect of the coal content on the permeability, green compressive strength and shatter index is too less than that of the clay content and moisture content.

Copyright
© 2012, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 1st International Conference on Mechanical Engineering and Material Science (MEMS 2012)
Series
Advances in Intelligent Systems Research
Publication Date
December 2012
ISBN
978-90-78677-59-8
ISSN
1951-6851
DOI
10.2991/mems.2012.125How to use a DOI?
Copyright
© 2012, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - GAO Guili
AU  - SHI Dequan
AU  - WANG Lihua
PY  - 2012/12
DA  - 2012/12
TI  - Orthogonal Experiments for Effect of Components on Performance Parameters of Green Sand for High Density Moulding
BT  - Proceedings of the 1st International Conference on Mechanical Engineering and Material Science (MEMS 2012)
PB  - Atlantis Press
SP  - 475
EP  - 478
SN  - 1951-6851
UR  - https://doi.org/10.2991/mems.2012.125
DO  - 10.2991/mems.2012.125
ID  - Guili2012/12
ER  -