Proceedings of the 2016 4th International Conference on Mechanical Materials and Manufacturing Engineering

The effects of process parameters on forming limit of rectangular tube in rotary draw bending process

Authors
Kuanxin Liu, Shunqi Zheng, Gang Chen
Corresponding Author
Kuanxin Liu
Available Online October 2016.
DOI
10.2991/mmme-16.2016.84How to use a DOI?
Keywords
Forming limit; determination method; Forming limit diagram
Abstract

In the manuscript, the forming limit for cross-section distortion is defined according to the employing area and aviation standard. First, the definition and determination method of forming limits is proposed. And then, the effects of process parameters on forming limit are investigated based the 3D FE simulation model. Finally, the 3D forming limit diagrams for cross-section distortion are obtained under different process parameters.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 4th International Conference on Mechanical Materials and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2016
ISBN
978-94-6252-221-3
ISSN
2352-5401
DOI
10.2991/mmme-16.2016.84How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Kuanxin Liu
AU  - Shunqi Zheng
AU  - Gang Chen
PY  - 2016/10
DA  - 2016/10
TI  - The effects of process parameters on forming limit of rectangular tube in rotary draw bending process
BT  - Proceedings of the 2016 4th International Conference on Mechanical Materials and Manufacturing Engineering
PB  - Atlantis Press
SP  - 372
EP  - 377
SN  - 2352-5401
UR  - https://doi.org/10.2991/mmme-16.2016.84
DO  - 10.2991/mmme-16.2016.84
ID  - Liu2016/10
ER  -