Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)

Method and device increasing efficiency of drilling directional wells

Authors
Victor Maksimovich Spasibov, Roman Vladimirovich Raspopov
Corresponding Author
Victor Maksimovich Spasibov
Available Online July 2017.
DOI
https://doi.org/10.2991/aime-17.2017.107How to use a DOI?
Keywords
drilling; directional wells; bit; weight on bit; device; control
Abstract
The main independent controllable parameters in drilling oil and gas wells are the weight on bit and the frequency of bit rotation. When drilling deep directional wells with horizontal sections of the wellbore, the weight comes to the bottomhole with a delay due to increased frictional forces during the movement of the drill string to the bottomhole. This complicates the drilling control procedure. There are the methods of autonomous control of the weight on bit using electrical drilling, downhole motor, and the bit feeders. The research has shown that all known methods can generally only supplement the conventional method of creating weight on bit - transmitting the weight of the compressed part of the drilling tool and formation of hydraulic force on the downhole motor shaft. Each of those methods has certain shortcomings and does not solve the problem entirely. This paper presents the method and the device that are most effective for drilling directional wells. It is achieved by generating an additional weight on bit in the device, transferring this weight and the part of the force from the drill string through the upper end of the downhole motor shaft to the bit. Reduction of the frictional forces of the drill string against the borehole wall is carried out by the constant transmission of the bit axial vibrations from the upper end of the shaft of the downhole motor to the drill string and by adjustment of the axial vibrations parameters
Open Access
This is an open access article distributed under the CC BY-NC license.

Download article (PDF)

Proceedings
International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)
Part of series
Advances in Engineering Research
Publication Date
July 2017
ISBN
978-94-6252-406-4
ISSN
2352-5401
DOI
https://doi.org/10.2991/aime-17.2017.107How to use a DOI?
Open Access
This is an open access article distributed under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - Victor Maksimovich Spasibov
AU  - Roman Vladimirovich Raspopov
PY  - 2017/07
DA  - 2017/07
TI  - Method and device increasing efficiency of drilling directional wells
BT  - International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)
PB  - Atlantis Press
SP  - 659
EP  - 664
SN  - 2352-5401
UR  - https://doi.org/10.2991/aime-17.2017.107
DO  - https://doi.org/10.2991/aime-17.2017.107
ID  - Spasibov2017/07
ER  -