Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)

513 authors
Abramov, Evgeniy Yrievich
Traction network currents distribution under different power supply voltage
Abramov, E.Y.
Improving energy efficiency of urban electric transport system using autonomous energy sources
Abramov, Ewgeniy
Ways of single-phase rectifiers energy efficiency improvement
Absimetov, Maksim
Perspectives of application of aerated concrete for 3D building printing
Afanasiev, Alexandr Alexandrovich
Improvement of thermal processing during product manufacture at small enterprises
Ageeva, Marina Sergeevna
Technogenic sand as activator of cement hardening
Aipov, R.
Analysis of Pulsed Operating Mode of Linear Induction Drive of Grain Cleaning Machine
Akberov, K.Ch.
Role Of Administrative Potential In Development Of Social And Economic Potential Of Rural Territory
Akhmetvalieva, Gulnara R.
Influence of Nanoadditives on Rheological Properties of Fuel Oil
Alekseeva, I.K.
Improving energy efficiency of urban electric transport system using autonomous energy sources
Alekseeva, L.B.
Analysis of Schemes of Control and Management of Glass Rod Drawing Process
Alekseeva, Irina
Power performance single-phase rectifier depending on topology and control methods
Alekseeva, Irina
Ways of single-phase rectifiers energy efficiency improvement
Alexeev, Gennady Valentinovich
Ball under action of periodic point load
Alfimova, Nataliya Ivanovna
Effective composite binders
Alifanova, Alla
Intensity enhancement of heat exchange in shell-tube heat exchangers with smooth pipes
Aliferov, A.I.
Economical and Ecological Electric Heaters for Room Heating
Aliferov, A.I.
Induction heating based on permanent magnets with magnetic field concentrators
Alymenko, N I
Ejector fan installations used in mines of Russia
Alymenko, Nikolay I.
Factors Defining Value and Direction of Thermal Drop Between Mine Shafts and Impact of General Mine Natural Draft on Ventilation Process of Underground Mining Companies
Alymenko, Daniil N.
Factors Defining Value and Direction of Thermal Drop Between Mine Shafts and Impact of General Mine Natural Draft on Ventilation Process of Underground Mining Companies
Andreev, Leonid
Energy efficient technologies of microclimate creation in animal husbandry
Anosov, V. N.
Synthesis of control system of recuperation of braking energy to supply grid for Metropolitan
Anosov, V. N.
Selection of Control Algorithms for Hybrid Electric Vehicle
Anshakov, A.S.
Economical and Ecological Electric Heaters for Room Heating
Anshakov, A.S.
Effect of Swirling Gas Flow in Electrode Cavity on its Erosion
Arestova, Anna Y.
Basics of evaluation methods of HPP resource usage during operation in IPS
Arutyunyan, Ashot Straevich
Secondary opening of productive layers
Azmetov, Khasan Akhmetzievich
Design of Oil and Gas Industry Pipeline Systems Taking into Account Out-of-Roundness of Pipes and Change of Transportation Mode
Babin, A.Yu.
Fractures modeling in system of engineering analysis
Bakhtizin, Ramil Nazifovich
Design of Oil and Gas Industry Pipeline Systems Taking into Account Out-of-Roundness of Pipes and Change of Transportation Mode
Balabaev, Vladimir
Design of installation for preparation of food chitosan from crab shell containing raw material by electrophysical processing
Baluev, Dmitry
Energy Storage Device Application for Load Oscillations Damping in Isolated Power Systems
Bartolomey, Maria
Numerical investigation of isotropic beam crystallization process under nonuniform cooling
Bashkov, O.V.
Registration of acoustic emission in composite material by fiber-optic sensors based on adaptive interferometer
Bashkov, I.O.
Registration of acoustic emission in composite material by fiber-optic sensors based on adaptive interferometer
Bauer, Vladimir Ioganesovich
Influence of standard of demand for automobiles on production figures of oil-producing organisations' subdivisions
Bauer, Vladimir Ioganesovich
Providing special vehicles with spare parts in oil-and-gas sector
Baykov, Konstantin
Digital economy and geoinformation technologies
Baynazarov, V.
Analysis of Pulsed Operating Mode of Linear Induction Drive of Grain Cleaning Machine
Bazanov, Artyom Vladimirovich
Influence of standard of demand for automobiles on production figures of oil-producing organisations' subdivisions
Bazanov, Artyom Vladimirovich
Providing special vehicles with spare parts in oil-and-gas sector
Belousov, Alexandr V.
Development of Control System of Hot Water Supply Solar Plant
Belousov, Alexandr Vladimirovih
Process simulation in temperature control system of oil in autogenous grinding mill
Benderskaya, Olga Borisovna
Sustainability of Belgorod Region Enterprises of Building Materials and Building Structures Industry under Sanctions
Berdin, V.K.
Fractures modeling in system of engineering analysis
Besedin, Pavel Vasilievich
Intensification of synthesis processes of clinker minerals in presence of coal-alkaline additive
Bessmertnyi, Vasiliy Stepanovich
Plasma-chemical modification of concrete processed by colorific metal salts
Bikeev, R.A.
Effectiveness of functioning of arc steel furnaces under changes of voltages in arc discharges
Bikeev, R.A.
Induction heating based on permanent magnets with magnetic field concentrators
Blaginin, Viktor
Russia On World Research Front Of Industrial Scientific Direction
Blednova, Zhesfina Mikhailovna
Influence of operational factors on fail-safety and resource of LISB bypass device for spacecrafts
Bochkarev, Yuriy S.
Operating efficiency of BelAZ-7540 dump trucks under conditions of North
Bogdanov, Vasily Stepanovich
Movement of materials in gyroscopic-type mixer
Bondarenko, Diana Olegovna
Plasma-chemical modification of concrete processed by colorific metal salts
Bondarenko, Nadezda Ivanovna
Plasma-chemical modification of concrete processed by colorific metal salts
Bondarenko, Diana Olegovna
Complex study of modified binder properties
Bondarev, Yuriy Leonidovich
Superconducting electrokinetic storage for energy saving and energy enhancement in local electric networks
Botsman, Alexey Nikolaevich
Technogenic sand as activator of cement hardening
Botsman, Larisa Nikolaevna
Technogenic sand as activator of cement hardening
Bower, V.R.
Effect of Swirling Gas Flow in Electrode Cavity on its Erosion
Bryansky, A.A.
Registration of acoustic emission in composite material by fiber-optic sensors based on adaptive interferometer
Burlakov, Nikolay Mikhailovich
Plasma-chemical modification of concrete processed by colorific metal salts
Bushueva, Natalia Petrovna
Intensification of synthesis processes of clinker minerals in presence of coal-alkaline additive
Butakov, E.B.
Effect of Swirling Gas Flow in Electrode Cavity on its Erosion
Byk, Felix
Power Supply Reliability Indexes
Chepchurov, Mihail Sergeevich
Calculation of Fixing Element of Metal-Polymeric Mold-Forming Surface of Mold in Metal Cage
Chepchurov, Mihail Sergeevich
Technology of metal-polymer form-building parts of compression molds
Cherednichenko, V.S.
Effectiveness of functioning of arc steel furnaces under changes of voltages in arc discharges
Cherednichenko, V.S.
Effect of Swirling Gas Flow in Electrode Cavity on its Erosion
Chernositova, Elena Sergeevna
Flowability and durability of cement containing technological additives during grinding process
Chernykh, Irina A.
Development of method for determining bottom-hole pressure in production wells
Chernysheva, Natalia Vasilyevna
Effective Composites Employing Fast-Hardening Gypsum Cement Binders for Additive Manufacturing
Chudnova, Olga
Modeling material flows as basic tool for enhancing company's efficiency during crisis
Chugunov, A.D.
Electrochemical regeneration of chromium-containing galvanic solutions
Chukalin, Andrey V.
Technical solutions for increasing efficiency of gas turbine engines
Chulkova, Irina Lvovna
Study of structure formation in bitumen-mineral compositions based on fly ash under water saturation
Dankova, Zhanna Yuryevna
Modeling of managerial processes in the conditions of innovative economy
Daus, Yuliia
Estimation of Solar Energy Potential under Conditions of Urban Development
Degtyar, Andrey Nikolayevich
Movement of materials in gyroscopic-type mixer
Denisova, Julia Vladimirovna
Flowability and durability of cement containing technological additives during grinding process
Denisova, Julia Vladimirovna
Polyfunctional modifier for bio-corrosion resistant high-performance fine-aggregate concretes
Dmitriev, Sergey
Non-destructive Testing of Duralumin and Titanium Alloys
Dolzhenko, Alexandr
Experimental Study of Actual Operation of Plastic Tube Concrete Constructions
Dolzhikova, Lyudmila Vasilievna
Mathematical modelling of heat accumulator for thermal preparation system of road-building machinery
Domarov, P.V.
Effect of Swirling Gas Flow in Electrode Cavity on its Erosion
Domozhirova, Olga
Assessment of Costs for Utilization of Amorphous Magnesite By-Products in Complex Production
Dutova, O.S.
Heat transfer and modeling hollow cathode material structural state of vacuum plasmatron
Ekkerdt, Kirill
Non-destructive Testing of Duralumin and Titanium Alloys
Elistratkin, Michail
Perspectives of application of aerated concrete for 3D building printing
Eremin, A.V.
Study of Fast Relaxing Excitations Caused by Ultrashort Laser Pulses in Nanoscale Domain
Eremin, A.V.
Mathematical Modelling of Strongly Non-Equilibrium Transfer Processes at Nanoscopic Scale
Ergunova, Olga
Russia On World Research Front Of Industrial Scientific Direction
Ermolaeva, Alina
Perspectives of application of aerated concrete for 3D building printing
Erofeeva, Natalia
Vacuum freeze-drying of products of goats lactation through heat pump: model development and equipment
Evtushenko, Evgenii Ivanovich
Calculation of Fixing Element of Metal-Polymeric Mold-Forming Surface of Mold in Metal Cage
Faleev, V.A.
Effect of Swirling Gas Flow in Electrode Cavity on its Erosion
Fedorov, Ruslan V.
Mechanisms and models of control of turbulent transfer in boundary layer
Fedorov, Ruslan V.
Technical solutions for increasing efficiency of gas turbine engines
Feoktistov, Alexey
Intensity enhancement of heat exchange in shell-tube heat exchangers with smooth pipes