Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)
513 authors
- Filatova, E.G.
- Electrochemical regeneration of chromium-containing galvanic solutions
- Filippova, Tamara A.
- Basics of evaluation methods of HPP resource usage during operation in IPS
- Fillipenko, Valeriy
- Main provisions for formation of cognitive model of visually observable environment synthesized for aircraft simulator
- Fomina, Ekaterina Viktorovna
- Nanocomposite carbon-bearing sorption material
- Gaevaya, E.V.
- Improvement of biological recultivation technology of disturbed solid of oil, gas and condensate field
- Gafarova, V.A.
- Fractures modeling in system of engineering analysis
- Gagarin, Vladimir G.
- Moisture condition of building materials in different operating conditions
- Gaitov, Bogaudin Khamidovich
- Advanced Axial Pumps for Oil Industry
- Gaitov, Bogaudin Khamidovich
- Wind-solar generator
- Gaitov, Bogaudin Khamidovich
- Oil Separator
- Galkin, V.I.
- Estimation Method of Oil Displacement Efficiency Based on Standard Core Analysis
- Galkin, V.I.
- Influence of moisture content and soil type on depth of penetration of hydrocarbons into rock massif
- Galkin, Vladislav I.
- Development of method for determining bottom-hole pressure in production wells
- Galochkina, Nadezhda
- Design of installation for preparation of food chitosan from crab shell containing raw material by electrophysical processing
- Galochkina, Nadezhda
- Vacuum freeze-drying of products of goats lactation through heat pump: model development and equipment
- Galyamov, A.A.
- Improvement of biological recultivation technology of disturbed solid of oil, gas and condensate field
- Gaponenko, Aleksandr Makarovich
- Optimization of Stirling engine operation based on mathematical modeling
- Gaponenko, Elena Vladimirovna
- Algorithms for building products using 3D printing with cable-suspended robot
- Generalov, Dmitry A.
- Technical solutions for increasing efficiency of gas turbine engines
- Gladkikh, E.A.
- Estimation Method of Oil Displacement Efficiency Based on Standard Core Analysis
- Glagolev, Evgeniy Sergeevich
- Effective composite binders
- Glagolev, Evgeny
- Perspectives of application of aerated concrete for 3D building printing
- Glagolev, Evgeny Sergeyevich
- Effective Composites Employing Fast-Hardening Gypsum Cement Binders for Additive Manufacturing
- Glagolev, Evgeny Sergeyevich
- Increasing efficiency of composite thermal insulation foam concretes
- Glazirin, V.E.
- Characteristic Features of Internal and External Faults for Use in Differential Protection
- Glmetdinov, M. F.
- Superconducting electrokinetic storage for energy saving and energy enhancement in local electric networks
- Glotova, Irina
- Design of installation for preparation of food chitosan from crab shell containing raw material by electrophysical processing
- Glotova, Irina
- Vacuum freeze-drying of products of goats lactation through heat pump: model development and equipment
- Goncharova, Elena Nikolayevna
- Effect of parameters of production process of photocatalytic coatings on bactericidal property
- Gorodov, Andrey Ivanovich
- Comprehensive use of waste after benificiation of magnetite fraction by floatation
- Gorynin, G.L.
- Non-linear simulation of load-bearing capacity for steel-encased concrete piles
- Gramuzov, Evgeniy Mikhailovich
- Influence of different components on resistance of ships movement in ice
- Gridchin, Anatoliy Mitrofanovich
- Effective composite binders
- Grishanova, Aleksandra
- Digital economy and geoinformation technologies
- Gupta, S.K.
- Molecular Dynamics Simulation of Xenon Diffusion in UO2 Nanocrystals
- Hassan, Mohamed
- Study of Suspension Bridge Deformation Using Neural Network
- Hou, Pengkun
- Complex study of modified binder properties
- Ishchenko, Alina Valentinovna
- Technogenic sand as activator of cement hardening
- Ishkov, A.M.
- Open-pit crawl dozers operating under northern climatic conditions
- Ishkov, A.M.
- Operating efficiency of BelAZ-7540 dump trucks under conditions of North
- Ishkov, Alexey
- Non-destructive Testing of Duralumin and Titanium Alloys
- Ivanov, V.V.
- Improving energy efficiency of urban electric transport system using autonomous energy sources
- Ivanov, Vladlen
- Power performance single-phase rectifier depending on topology and control methods
- Ivanov, Vladlen
- Ways of single-phase rectifiers energy efficiency improvement
- Kagramanova, Aleksandra Aleksandrovna
- Optimization of Stirling engine operation based on mathematical modeling
- Kalinina, Nadezhda Viktorovna
- Influence of different components on resistance of ships movement in ice
- Kamaletdinova, Guzel R.
- Mathematical Model for Calculation of Process of Chemisorption Adsorption of Carbon Dioxide
- Kamaltdinov, V.G.
- Fuel Stream Modeling in Flowing Section of Sprayers of Diesel Nozzles
- Kamaltdinov, V.G.
- Using Mustard Oil as Ecological Additive to Petroleum Diesel Fuel
- Kamenskikh, A A
- Ejector fan installations used in mines of Russia
- Kamenskikh, Anna
- Numerical investigation of isotropic beam crystallization process under nonuniform cooling
- Kamenskikh, Anton A.
- Factors Defining Value and Direction of Thermal Drop Between Mine Shafts and Impact of General Mine Natural Draft on Ventilation Process of Underground Mining Companies
- Kapustin, A.V.
- Improving energy efficiency of urban electric transport system using autonomous energy sources
- Kapustin, Andrei
- Power performance single-phase rectifier depending on topology and control methods
- Kapustin, Andrei
- Ways of single-phase rectifiers energy efficiency improvement
- Kara, Karina
- Experimental Study of Actual Operation of Plastic Tube Concrete Constructions
- Kashin, Aleksandr Yakovlevich
- Wind-solar generator
- Kashin, Yakov Mikhajlovich
- Advanced Axial Pumps for Oil Industry
- Kashin, Yakov Mikhajlovich
- Oil Separator
- Katasonov, Alexander
- Non-destructive Testing of Duralumin and Titanium Alloys
- Kaveshnikov, V. M.
- Synthesis of control system of recuperation of braking energy to supply grid for Metropolitan
- Kazantsev, Alexander Mikhailovich
- Superconducting electrokinetic storage for energy saving and energy enhancement in local electric networks
- Khabibullina, Railya V.
- Influence of Nanoadditives on Rheological Properties of Fuel Oil
- Khakhaleva, Larisa V.
- Mechanisms and models of control of turbulent transfer in boundary layer
- Khakhaleva, Larisa V.
- Technical solutions for increasing efficiency of gas turbine engines
- Khalapyan, Sergey Yuriyevich
- Determination of necessary geometric parameters of tripod robot workspace, taking into account zones of singularity
- Khalimonenko, A.D.
- Method of Calculating Intermediate Diametral Sizes and Allowances for Designing Technology of Manufacture of Details
- Khizhniak, G.P.
- Estimation Method of Oil Displacement Efficiency Based on Standard Core Analysis
- Khokhlova, Ksenia
- Power Supply Reliability Indexes
- Kholopov, Ivan S.
- Bird's Eye View Transformation Technique in Photogrammetric Problem of Object Size Measuring at Low-altitude Photography
- Khon, H.
- Registration of acoustic emission in composite material by fiber-optic sensors based on adaptive interferometer
- Khoroshavina, Elena Aleksandrovna
- Preventing paraffination of pumping equipment of oil wells
- Khristoforov, Mikhail Sergeyevich
- Advanced Axial Pumps for Oil Industry
- Khristoforov, Mikhail Sergeyevich
- Wind-solar generator
- Khudyakova, Tatyana
- Russia On World Research Front Of Industrial Scientific Direction
- Kichigina, N.V.
- Molecular Dynamics Simulation of Xenon Diffusion in UO2 Nanocrystals
- Kim, Vladislav Anatolievich
- Advanced Axial Pumps for Oil Industry
- Kim, Vladislav Anatolievich
- Oil Separator
- Kiryanova, Natalya
- Energy Storage Device Application for Load Oscillations Damping in Isolated Power Systems
- Kizurov, Anatoly Sergeevich
- Symmetry of single-phase loads in four-wire three-phase networks of alternating sinusoidal current
- Koltsov, Vladimir P.
- Complex method of peen forming and shot peening of aircraft structural components
- Komazenko, Maria A.
- Synthesis of Vector Control Systems for Induction Motor Drives
- Kondratyev, N.V.
- Finite Element Code for Multidimensional Numerical Analysis of Squirrel-Cage Induction Motor
- Kondrin, S.A.
- Superconducting electrokinetic storage for energy saving and energy enhancement in local electric networks
- Konev, Vitaliy Valerievich
- Mathematical modelling of heat accumulator for thermal preparation system of road-building machinery
- Kopelevich, Lev Efimovich
- Wind-solar generator
- Kopelevich, Lev Efimovich
- Oil Separator
- Kornilova, Natalya
- Research of Refuse Derived Fuel Use with Pyrolysis Furnace
- Korobova, N.
- Development of MEMS Angular Rate Sensor with Self-calibration Function
- Korolkova, Nadezhda
- Design of installation for preparation of food chitosan from crab shell containing raw material by electrophysical processing
- Korovin, V.E.
- Effectiveness of functioning of arc steel furnaces under changes of voltages in arc discharges
- Koshlich, Yury A.
- Development of Control System of Hot Water Supply Solar Plant
- Kotenev, Yuri Alekseevich
- Waterflooding for lateral anisotropy of porous media
- Kovalnogov, Vladislav N.
- Mechanisms and models of control of turbulent transfer in boundary layer
- Kovalnogov, Vladislav N.
- Technical solutions for increasing efficiency of gas turbine engines
- Kozin, Evgeniy Sergeevich
- Influence of standard of demand for automobiles on production figures of oil-producing organisations' subdivisions
- Kozin, Evgeniy Sergeevich
- Providing special vehicles with spare parts in oil-and-gas sector
- Krainiy, Anatoly Anatolyevich
- Comprehensive use of waste after benificiation of magnetite fraction by floatation
- Krasnov, Andrei Nikolaevich
- Preventing paraffination of pumping equipment of oil wells
- Krasnyy, V.A.
- Specific Features of Friction Mechanisms of Thin-film Coatings of Parts of Mining Machines Working in Fretting Corrosion