Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)

513 authors
Krivenkova, Anna Nikolaevna
Technogenic sand as activator of cement hardening
Krut, Oksana Borisovna
Mathematical modelling of heat accumulator for thermal preparation system of road-building machinery
Kubasova, Anna
Design of installation for preparation of food chitosan from crab shell containing raw material by electrophysical processing
Kubenin, Alexander S.
Moisture condition of building materials in different operating conditions
Kucher, Ekaterina S.
Synthesis of Vector Control Systems for Induction Motor Drives
Kudinov, I.V.
Study of Fast Relaxing Excitations Caused by Ultrashort Laser Pulses in Nanoscale Domain
Kudinov, I.V.
Mathematical Modelling of Strongly Non-Equilibrium Transfer Processes at Nanoscopic Scale
Kudinov, V.A.
Study of Fast Relaxing Excitations Caused by Ultrashort Laser Pulses in Nanoscale Domain
Kudinov, V.A.
Mathematical Modelling of Strongly Non-Equilibrium Transfer Processes at Nanoscopic Scale
Kupryazhkin, A.Ya.
Molecular Dynamics Simulation of Xenon Diffusion in UO2 Nanocrystals
Kurchaeva, Elena
Vacuum freeze-drying of products of goats lactation through heat pump: model development and equipment
Kushchev, Leonid
Intensity enhancement of heat exchange in shell-tube heat exchangers with smooth pipes
Kusov, Gennady Vladimirovich
Secondary opening of productive layers
Kuts, Lyubov E.
Obtaining Heterogeneous Oxide Coating on Chrome-Nickel Steel in Heating-Cooling Cycles in the Air
Kuzeev, Iskander
Multiparameter assessment of accumulated fatigue damages level
Kuznetsov, S.M.
Set-point Revisiting Of Maximum Impulse Protection Adjustment For DC Electric Traction Network
Lange, P.
Method for vibro-acoustic signal processing for detection of nascent defect of mechanical assemblies
Langeman, E.G.
Set-point Revisiting Of Maximum Impulse Protection Adjustment For DC Electric Traction Network
Langeman, Evelina Garrievna
Traction network currents distribution under different power supply voltage
Lebedev, Mikhail Sergeevich
Study of structure formation in bitumen-mineral compositions based on fly ash under water saturation
Leonovith, M.F.
Influence of moisture content and soil type on depth of penetration of hydrocarbons into rock massif
Lesovik, R.V.
Assessment of progressive collapse of operated buildings and structures based upon structural damage
Lesovik, Ruslan Valerievich
Effective composite binders
Lesovik, Valery
Perspectives of application of aerated concrete for 3D building printing
Lesovik, Valery Stanislavovich
Effective Composites Employing Fast-Hardening Gypsum Cement Binders for Additive Manufacturing
Lesovik, Valery Stanislavovich
Increasing efficiency of composite thermal insulation foam concretes
Levchenko, Olga Viktorovna
Effective composite binders
Likhacheva, Olga Nikolaevna
Secondary opening of productive layers
Linenko, A.
Analysis of Pulsed Operating Mode of Linear Induction Drive of Grain Cleaning Machine
Lisitsky, Dmitry
Digital economy and geoinformation technologies
Litvinov, I.I.
Characteristic Features of Internal and External Faults for Use in Differential Protection
Livanova, E. A.
Synthesis of control system of recuperation of braking energy to supply grid for Metropolitan
Loboda, S.S.
Using Mustard Oil as Ecological Additive to Petroleum Diesel Fuel
Loza, Alexander Alexandrovich
Ball under action of periodic point load
Lubchenko, Elena
Modeling material flows as basic tool for enhancing company's efficiency during crisis
Lubimyi, Nickolai Sergeevich
Calculation of Fixing Element of Metal-Polymeric Mold-Forming Surface of Mold in Metal Cage
Lubimyi, Nickolai Sergeevich
Technology of metal-polymer form-building parts of compression molds
Makarenko, Oleg Anatolyevich
Design of Oil and Gas Industry Pipeline Systems Taking into Account Out-of-Roundness of Pipes and Change of Transportation Mode
Makarova, Anastasiya O.
Influence of Nanoadditives on Rheological Properties of Fuel Oil
Makhno, Dmitriy E.
Operating efficiency of BelAZ-7540 dump trucks under conditions of North
Makhno, Dmitriy E.
Measurements of section pump rotor axial position at Udachny mine
Makhov, V.E.
Method for studying shape of cutting tool by light field recorder
Makhutov, Nikolai Andreevich
Influence of operational factors on fail-safety and resource of LISB bypass device for spacecrafts
Maksarov, V.V.
Specific Features of Friction Mechanisms of Thin-film Coatings of Parts of Mining Machines Working in Fretting Corrosion
Maksarov, V.V.
Method for studying shape of cutting tool by light field recorder
Maksimov, Igor
Design of installation for preparation of food chitosan from crab shell containing raw material by electrophysical processing
Maleshin, Igor A.
Mechanisms and models of control of turbulent transfer in boundary layer
Malikov, Vladimir
Non-destructive Testing of Duralumin and Titanium Alloys
Malozyomov, B.V.
Role Of Administrative Potential In Development Of Social And Economic Potential Of Rural Territory
Malozyomov, B.V.
Set-point Revisiting Of Maximum Impulse Protection Adjustment For DC Electric Traction Network
Malozyomov, B.V.
Question Of Determining Diagnostics Time Intervals Of Electric Transport Systems Using Time Between Failures
Malozyomov, B.V.
Systems and algorithms of work for protecting electric traction networks
Malozyomov, B.V.
Improvement Of Method Of Setting Digital Protection Devices In Straight DC Power Networks
Malozyomov, B.V.
Device For Control Of Integrity Of Graphite Electrodes
Malozyomov, B.V.
Performance Increase of Lithium-Ion Batteries
Malozyomov, B.V.
Electroosymotic Recultivation of Waste Pits in Oil Fields
Malozyomov, B.V.
Electric Corona Discharge Using For Grain Seeds Treatment Before Sowing
Malozyomov, B.V.
Alternative Electrokinetic Technologies in Agroecosystems and Land Use
Malyshev, Dmitry Ivanovich
Determination of necessary geometric parameters of tripod robot workspace, taking into account zones of singularity
Malyshev, Dmitry Ivanovich
Algorithms for building products using 3D printing with cable-suspended robot
Markov, A.V.
Mathematical model of dynamics of two-coil synchronous electromagnetic impact machine with spring reversal of striker
Markov, V.A.
Fuel Stream Modeling in Flowing Section of Sprayers of Diesel Nozzles
Markov, V.A.
Using Mustard Oil as Ecological Additive to Petroleum Diesel Fuel
Mazurov, Boris
Study of Suspension Bridge Deformation Using Neural Network
Merkulov, S.I.
Assessment of progressive collapse of operated buildings and structures based upon structural damage
Mihailovna, Chetoshnikova Larisa
Superconducting electrokinetic storage for energy saving and energy enhancement in local electric networks
Miheev, Michail
Main provisions for formation of cognitive model of visually observable environment synthesized for aircraft simulator
Mikhalsky, Oleg
Architecture of Transaction Monitoring System of Central Banks
Mikheev, A.
Development of MEMS Angular Rate Sensor with Self-calibration Function
Minaev, D.V.
Electrochemical regeneration of chromium-containing galvanic solutions
Morev, A.E.
Induction heating based on permanent magnets with magnetic field concentrators
Morozova, A.I.
Open-pit crawl dozers operating under northern climatic conditions
Mukhacheva, Valentina Dmitryevna
Polyfunctional modifier for bio-corrosion resistant high-performance fine-aggregate concretes
Mukhortov, Aleksandr Alekseevich
Influence of standard of demand for automobiles on production figures of oil-producing organisations' subdivisions
Mukhortov, Aleksandr Alekseevich
Providing special vehicles with spare parts in oil-and-gas sector
Munitsyn, A.I.
Steady motions of nonhomogeneous ellipsoid on horizontal plane
Munitsyna, M.A.
Steady motions of nonhomogeneous ellipsoid on horizontal plane
Muravyova, E. A.
Method of fuzzy controller adaptation
Muzyleva, Elena Sergeevna
Modeling of managerial processes in the conditions of innovative economy
Myatez, Sergei
Power performance single-phase rectifier depending on topology and control methods
Myatez, Sergei
Ways of single-phase rectifiers energy efficiency improvement
Myatezh, A.V.
Device For Control Of Integrity Of Graphite Electrodes
Myatezh, A.V.
Performance Increase of Lithium-Ion Batteries
Myshkina, Lyudmila
Power Supply Reliability Indexes
Nartsev, Vladimir Mikhailovich
Effect of parameters of production process of photocatalytic coatings on bactericidal property
Naumkin, Evgeniy
Multiparameter assessment of accumulated fatigue damages level
Naumov, Andrey
Experimental Study of Actual Operation of Plastic Tube Concrete Constructions
Nekrasov, K.A.
Molecular Dynamics Simulation of Xenon Diffusion in UO2 Nanocrystals
Nekrasov, Roman Yurievich
Determination of quenching modes after thermodiffusion hardening of parts from gray cast iron
Nelubova, Viktoria Viktorovna
Complex study of modified binder properties
Netsvet, Daria Dmitrievna
Complex study of modified binder properties
Neyman, L.A.
Low-frequency electromagnetic shock machine
Neyman, L.A.
Mathematical model of dynamics of two-coil synchronous electromagnetic impact machine with spring reversal of striker
Neyman, V.Yu.
Low-frequency electromagnetic shock machine
Neyman, V.Yu.
Mathematical model of dynamics of two-coil synchronous electromagnetic impact machine with spring reversal of striker
Nguyen, Tien Quyet
Investigation of vibration and fatigue life of mistuned bladed disks
Nikolaev, A V
Ejector fan installations used in mines of Russia
Nikolaev, Alexandr V.
Factors Defining Value and Direction of Thermal Drop Between Mine Shafts and Impact of General Mine Natural Draft on Ventilation Process of Underground Mining Companies
Nikolaev, Viktor A.
Factors Defining Value and Direction of Thermal Drop Between Mine Shafts and Impact of General Mine Natural Draft on Ventilation Process of Underground Mining Companies
Nikulin, Nikolai
Intensity enhancement of heat exchange in shell-tube heat exchangers with smooth pipes