Proceedings of the 9th China-Russia Symposium "Coal in the 21st Century: Mining, Intelligent Equipment and Environment Protection" (COAL 2018)

263 authors
Li, Zhen
Extension of Water Flowing Fractured Zone during Coal Seams Mining in No.1 Mine of Tashendian Area
Li, Zhen
Research on D Section Steel Tube Filled with Concrete Used for High Stress Roadway Support in Deep Mines
Liang, Jiashu
Study on Temperature Effect of Concrete Mechanical Properties
Liang, Jiashu
Experimental Study on Mechanical Properties of Granite at Different Damage Degrees
Liskovets, Alexander
Increase of the Frame Support Yield Load by Full Filling of Behind-Anchoring Space with Grout Material
Litvin, Oleg
Defining the Excavated Layer’s Height for Coal Extraction by Backhoes
Liu, Bing
Effect of Surface Defects and Internal Pressure on Fatigue Life of Coiled Tubing
Liu, Bo
Experimental Research on the Effect of Initial Temperature Coupled with Ignition Energy on the Gas-air Mixture Explosive Limits
Liu, Bo
The Injectability of the Advanced Inhibiting Coal Seam and the Effect of Inhibitor Injection
Liu, Chuanxiao
Relationships between Field, Experimental Strengths or Their Ratios and Excavating Depths of Rock Masses in Datun Coal Mining Area
Liu, Chuanxiao
Study on Temperature Effect of Concrete Mechanical Properties
Liu, Chuanxiao
Experimental Study on Mechanical Properties of Granite at Different Damage Degrees
Liu, Haiying
Simulation of Direct Torque Control for Five-Phase PMSM and Comparison of Optimized Vector Tables
Liu, Jinxiao
Application and Development on Coal Mine Backfill Mining Technologies in China
Liu, Limin
Research on D Section Steel Tube Filled with Concrete Used for High Stress Roadway Support in Deep Mines
Liu, Peikun
Simulation Research on Hydraulic Support Based Virtual Prototyping
Liu, Yin
A Summary of Research on the Durability of Cemented Paste Backfill in Mines
Liu, Yin
Effect of Desulfurization Gypsum and Quicklime on Performance of Fly Ash Filling Paste
Liu, Yuteng
A New Bumping Danger Warning Method Based on the Growth Trend of Drilling Cutting Quantity
Liu, Zhanxin
Effect of Desulfurization Gypsum and Quicklime on Performance of Fly Ash Filling Paste
Lu, Yao
Height Prediction of Water Flowing Fractured Zone and Thickness Effect of Long Wall Caving in Thick Loose Seam with Weak Cementation
Lu, Yao
Development of Water Flowing Fractured Zone Caused by Fully Mechanized Top Coal Caving in Xin’an Coal Mine
Lu, Yao
Effect of Desulfurization Gypsum and Quicklime on Performance of Fly Ash Filling Paste
Lv, Jiakun
Research on Reasonable Lag Time of Gob-side Entry Driving in Deep Mine Based on On-line Monitoring of Lateral Stress and Deformation of Working Face
Lyubimov, Oleg
Analysis of Studies of the Rock Pressure Manifestations During the Development of the New Kuzbass Seams
Lyukshin, Vladimir
Influence of Form and Orientation of Single Abrasive Grits on Their Strength Characteristics
Ma, Depeng
Relationships between Field, Experimental Strengths or Their Ratios and Excavating Depths of Rock Masses in Datun Coal Mining Area
Ma, Qing
Impact Hazard Assessment of Mine Roadway Excavation in Fault and Karst Erosion Area
Ma, Zhitao
Numerical Analysis of the Effect of Tunnel Advance Support on Surrounding Rock Stability
Makridin, Eugene
Research of the Breakdown Rock Mass Parameters Under Conditions of the Transportless Mining System
Markov, Sergey
Defining the Excavated Layer’s Height for Coal Extraction by Backhoes
Martyanov, Vctor
Research of the Breakdown Rock Mass Parameters Under Conditions of the Transportless Mining System
Meng, Xiangbao
Experimental Research on the Effect of Initial Temperature Coupled with Ignition Energy on the Gas-air Mixture Explosive Limits
Meng, Xiangbao
The Injectability of the Advanced Inhibiting Coal Seam and the Effect of Inhibitor Injection
Mikhaylova, Ekaterina
Development of Efficient Technologies for Abatement of Nitrogen and Sulfur Oxides in Flues Gases of Coal Combustion
Mokrushev, Andrey
The Detection of Defects in Rolling Bearings Based on the Analysis of Vibroacoustic Signal
Murko, Vasily
Development of Efficient Technologies for Abatement of Nitrogen and Sulfur Oxides in Flues Gases of Coal Combustion
Nataliya, Fedorova
Processing of Lignites into Effective Sorbents for Solving Environmental Problems and Improving the Quality of Life
Nepomnyashchikh, E.K.
Steam Gasification of Bituminous Coals with CaO Additives
Nepsha, Fedor
Features of Reactive Power Compensation in Electrical Networks of Coal Open Pit Mines
Oleg A., Ostanin
Modeling and Calculation of Cyclic Fatigue Life of Surface Plastic Strain Hardened Parts of Mining Machines Based on the Mechanics of Technological Inheritance
Opruk, Gleb
Directional Hydraulic Fracturing Application for Reduction of Rock Heaving Intensity in the Development Opening under Conditions of S.M. Kirov Mine
Pershin, V.V.
The Theory of Control of Stressed States of a Block Rock Massif with Regard to the Hierarchy of its Movements
Petrovna, Baranova Marina
The Use of By-product Coal as Fuel on Boiler Plants of Small and Medium Power
Pirieva, Natalya
Application of the Numerical Method for the Purposes of the Coal Pillars Failure Zones Estimation with Respect to Excessive Deformation
Podkur, Polina
Development of a Drilling Tool for Making non-Circular Cross-sections of Blastholes at Open-cast Operations
Ponizov, Alexander
Directional Hydraulic Fracturing Application for Reduction of Rock Heaving Intensity in the Development Opening under Conditions of S.M. Kirov Mine
Qin, Xiangjie
Progress in Research of Characterization Methods for Pore and Fissure Structures in Coal
Qin, Zhe
Study on the Influence of Magnification of Rock SEM on Fractal Dimension
Qin, Zhongcheng
A New Bumping Danger Warning Method Based on the Growth Trend of Drilling Cutting Quantity
Renev, Alexey A.
The Evaluation of Negative Anthropogenic Factors Subjection on Bolts Stability and Surrounding Massif Deformations
Rogova, Tamara
Investment Risks Reduction of Developing Coal Deposits on the Basis of Quantitative Assessment Method of the Geological Information Confidence
Sablin, Maxim
Increase of the Frame Support Yield Load by Full Filling of Behind-Anchoring Space with Grout Material
Shaklein, Sergey
Investment Risks Reduction of Developing Coal Deposits on the Basis of Quantitative Assessment Method of the Geological Information Confidence
Shatko, Dmitry
Influence of Form and Orientation of Single Abrasive Grits on Their Strength Characteristics
Shen, Baotang
Laboratory Study on the Propagation of Horizontal Edge Cracks in Rock-like Material
Shen, Junnan
Progress in Research of Characterization Methods for Pore and Fissure Structures in Coal
Shi, Weiping
Monitoring on Ground Movement of Geological Tectonic Region Based on InSAR Time Series Analysis
Shi, Weiping
Study on Ecological Environment Monitoring in Mining area based on Remote Sensing Information extraction
Shi, Yongkui
Study on the Method of Prevention and Control of Dynamic Disasters in Isolated Island Face
Shikina, Nadezhda
Development of Efficient Technologies for Abatement of Nitrogen and Sulfur Oxides in Flues Gases of Coal Combustion
Shiryamov, Dmitriy
The Ultimate Rotating Resistance of the Belt Conveyors Rollers
Shutko, Larisa
Influence of Form and Orientation of Single Abrasive Grits on Their Strength Characteristics
Sirota, Dmitry
Diagnostics of the 3D Shape of a Rock Failure Zone by Electrical Measurements on the Earth’s Surface
Smirnov, Vyacheslav
The Study of Natural Gas Hydrates Decomposition Conditions in Order to Determine Their Possible Influence on Gasodynamic Processes
Solovitskiy, A.N.
The Theory of Control of Stressed States of a Block Rock Massif with Regard to the Hierarchy of its Movements
Strelnikov, Pavel
Influence of Form and Orientation of Single Abrasive Grits on Their Strength Characteristics
Sun, Chuanping
Height Prediction of Water Flowing Fractured Zone and Thickness Effect of Long Wall Caving in Thick Loose Seam with Weak Cementation
Sun, Chuanping
Development of Water Flowing Fractured Zone Caused by Fully Mechanized Top Coal Caving in Xin’an Coal Mine
Sun, Huizhi
Sliding Mode Control of Permanent Magnet Synchronous Motor Based on Super-Twisting Algorithm
Sun, Lunan
Study on the Influence of Magnification of Rock SEM on Fractal Dimension
Sun, Xizhen
Laboratory Study on the Propagation of Horizontal Edge Cracks in Rock-like Material
Tan, Yunliang
Study on the Correlation Between Meso-Structure Fractal Characteristics and Macroscopic Parameters of Two Typical Rocks
Tatsienko, Viktor
Increase of the Frame Support Yield Load by Full Filling of Behind-Anchoring Space with Grout Material
Tatsienko, Viktor
Development of a Drilling Tool for Making non-Circular Cross-sections of Blastholes at Open-cast Operations
Tatyana, Cherkasova
Rare Metals in Kuzbass Ash and Slag Wastes: Prospects of Extraction
Tsibaev, Sergey S.
The Evaluation of Negative Anthropogenic Factors Subjection on Bolts Stability and Surrounding Massif Deformations
Tyulenev, Maxim
Defining the Excavated Layer’s Height for Coal Extraction by Backhoes
Tyuleneva, Tatyana
Environmental Consequences of Coal Mine Elimination
Udovitsky, Vladimir
Selection of Functions of the First Degree for Forecasting the Aggregate Bituminous Coal Size Characteristics
Vyacheslav, Portola
Open Pits Automobile Transport Impact on the Environment and Labor Safety
Vyacheslav, Tsvetkov
Processing of Lignites into Effective Sorbents for Solving Environmental Problems and Improving the Quality of Life
Wang, Changxiang
Height Prediction of Water Flowing Fractured Zone and Thickness Effect of Long Wall Caving in Thick Loose Seam with Weak Cementation
Wang, Changxiang
Development of Water Flowing Fractured Zone Caused by Fully Mechanized Top Coal Caving in Xin’an Coal Mine
Wang, Changxiang
Effect of Desulfurization Gypsum and Quicklime on Performance of Fly Ash Filling Paste
Wang, Feng
Reliability Analysis for Bolt-shotcrete Support System in Underground Tunnels
Wang, Gang
Progress in Research of Characterization Methods for Pore and Fissure Structures in Coal
Wang, Gaoshang
Application and Development on Coal Mine Backfill Mining Technologies in China
Wang, Hao
Numerical Study on the Mechanism of Water Inrush by Floor Damage and Fault Activation during Longwall Mining
Wang, Kai
A Summary of Research on the Durability of Cemented Paste Backfill in Mines
Wang, RuMeng
Study on the Water Inrush of the Underplate in the Mining Process of Kuting Coal Mine
Wang, Tongxu
Research on Surrounding Rock Control Technology of Roadway Excavated in Residual Coal Pillar
Wang, Wenbo
Height Prediction of Water Flowing Fractured Zone and Thickness Effect of Long Wall Caving in Thick Loose Seam with Weak Cementation
Wang, Wenbo
Development of Water Flowing Fractured Zone Caused by Fully Mechanized Top Coal Caving in Xin’an Coal Mine
Wang, Xinpeng
Numerical Analysis of the Effect of Tunnel Advance Support on Surrounding Rock Stability
Wang, Xinxin
Time-frequency Characteristics of Micro-seismic Signals Before and after Rock Burst
Wang, Yao
Study on the Water Inrush of the Underplate in the Mining Process of Kuting Coal Mine
Wang, Yuanjie
Research on Surrounding Rock Control Technology of Roadway Excavated in Residual Coal Pillar
Wen, XingLin
Study on the Water Inrush of the Underplate in the Mining Process of Kuting Coal Mine
Wen, Zhenxuan
Sliding Mode Control of Permanent Magnet Synchronous Motor Based on Super-Twisting Algorithm