Proceedings of the 2016 International Conference on Civil, Transportation and Environment

Fabrication and research on cone-shaped SOFCs by phase inversion technology

Authors
Handuo Wang, Cuixia Cai, Yuan Gao, Hailang Yu, Nisha Wang, Jiang Liu
Corresponding Author
Handuo Wang
Available Online January 2016.
DOI
10.2991/iccte-16.2016.229How to use a DOI?
Keywords
SOFCs, Cone-shaped, Phase inversion, Microstructure, Cell performance
Abstract

Cone-shaped tubular anode substrates were prepared successfully by phase inversion technique. The effect of several kinds of organic additives on the microstructure development of NiO-YSZ anode support has been investigated. The scanning electron microscopy (SEM) results of NiO-YSZ anode supports show that the organic additives can greatly influence microstructure of the anode. Electrochemical testing shows that the single cell provides a maximum power output of 350mW/cm-2 at 800°C using PEG-1000 as additive. The correlation between the electrochemical performance of single cells and microstructure of the anodes had been analyzed in detail. In addition, a two-cell-stack was assembled by connecting cone-shaped anode-supported single cells in series. The chemical performance of the stack had also been tested.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 International Conference on Civil, Transportation and Environment
Series
Advances in Engineering Research
Publication Date
January 2016
ISBN
10.2991/iccte-16.2016.229
ISSN
2352-5401
DOI
10.2991/iccte-16.2016.229How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Handuo Wang
AU  - Cuixia Cai
AU  - Yuan Gao
AU  - Hailang Yu
AU  - Nisha Wang
AU  - Jiang Liu
PY  - 2016/01
DA  - 2016/01
TI  - Fabrication and research on cone-shaped SOFCs by phase inversion technology
BT  - Proceedings of the 2016 International Conference on Civil, Transportation and Environment
PB  - Atlantis Press
SP  - 1305
EP  - 1312
SN  - 2352-5401
UR  - https://doi.org/10.2991/iccte-16.2016.229
DO  - 10.2991/iccte-16.2016.229
ID  - Wang2016/01
ER  -