Proceedings of the 5th International Conference on Information Engineering for Mechanics and Materials

<Previous Article In Volume
Next Article In Volume>

A Contour Fitting Algorithm for Rapid Prototyping Technology

Authors
Ge Wu
Corresponding Author
Ge Wu
Available Online July 2015.
DOI
10.2991/icimm-15.2015.110How to use a DOI?
Keywords
RP/M; ellipse curve; slicing
Abstract

This paper presents an fine approach to improve the process planning of Rapid Prototyping/Manufacturing (RP/M) .Corrected curves were introduced to maintain the accuracy of slicing layers. A mixed algorithm combined by tangent line and ellipse fitting method was developed to balance accuracy and build time. Through experiment it has been shown that the algorithm effectively build points sets and draw the ellipse curves near the original figure.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 5th International Conference on Information Engineering for Mechanics and Materials
Series
Advances in Engineering Research
Publication Date
July 2015
ISBN
10.2991/icimm-15.2015.110
ISSN
2352-5401
DOI
10.2991/icimm-15.2015.110How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

risenwbib
TY  - CONF
AU  - Ge Wu
PY  - 2015/07
DA  - 2015/07
TI  - A Contour Fitting Algorithm for Rapid Prototyping Technology
BT  - Proceedings of the 5th International Conference on Information Engineering for Mechanics and Materials
PB  - Atlantis Press
SP  - 585
EP  - 588
SN  - 2352-5401
UR  - https://doi.org/10.2991/icimm-15.2015.110
DO  - 10.2991/icimm-15.2015.110
ID  - Wu2015/07
ER  -