Proceedings of the 5th International Conference on Information Engineering for Mechanics and Materials

1077 authors
Ali, Rai Afaq
Dynamics and Vibration Analysis of Delta Robot
Alimujiang, Yiming
Research on Width of Traffic Securing in winter
Alimujiang, Yiming
Simple robust compensator for an adaptive optics system
BAI, Xue
Study on the reverse osmosis in concentrating phosphorus from simulated biogas slurry
Ba, Haihe
Integrity Measurement based on Trusted Computing
Baheti, Wufanbieke
Tribological Property of FG/UHMWPE Composites
Bai, Donghui
Time Series Clustering Method Based on Principal Component Analysis
Bai, Jing
Similarity assessment between local regions of 3D CAD model based on tree kernel
Bai, Junhua
The fundamental properties and application characteristics of foam fluid for enhanced oil recovery
Bai, Xiaofeng
Study on the reverse osmosis in concentrating phosphorus from simulated biogas slurry
Bai, Yan
Numerical Analysis for Heat and Mass Transfer of Pure Vapour Condensation in Inclined Flat Finned Tube
Bai, Ying
Monoclinic Li1+xV3O8 Synthesized via Electrospinning and Used as Cathode Material for Lithium Ion Batteries
Ban, Jianwei
Application and research of soft polymer material decoration in interior architecture
Ban, Yueqin
Electrochemical performances discharged to lower potential for LiNi0.5Mn1.5O4 cathode material synthesized by PAA-assisted co-precipitation method
Bo, Geri
A Robust Digital Watermarking Algorithm for Three Dimensional Meshes
Bo, Qiongqing
The Application of Virtual Simulation Technology in Studying Vehicle Vibration Characteristics on Random Road
Bo, Yang
Improvement and simulation of ZRP routing protocol based on Beidou Satellite
CHEN, Wei
Humanized Design and Its Application in Modern products
Cai, Lanrong
Study on Grinding of Titanium Alloy with Electrostatic Spraying Coating Wheel
Cai, Lei
Design and Optimization of Lifting Mechanism in Hemming Machine Based on ADAMS
Cai, Suyi
Study on Accurate Determination of Volatile Fatty Acids in Rumen Fluid by Capillary Gas Chromatography
Cao, Danyang
Time Series Clustering Method Based on Principal Component Analysis
Cao, Hengxi
Friction and Wear Properties of Nitrogen-doped graphene /Ultrahigh-Molecular-Weight Polyethylene Composites
Cao, Jianping
Steel sheet coating paint film after pitting problems research
Cao, Wen
Numerical simulation and performance analysis of multi structure Louver fins
Cao, Xinmin
The Remanufacturing Research on the Key Parts of Engineering Machinery
Cao, Xuejun
Prediction Model of Multiple Linear Regression Analysis in Grain Production
Cao, Yutong
Error Correction of Temperature Measurement System Based on the Seepage Test
Cao, Ziwen
The residual stress distribution and fatigue property of TC4 laser-welded joint treated by laser shock peening
Chang, Chunguang
Optimization Model of Resources Reallocation for Project Group under the Precondition of Resources Supply Scarcity
Chang, Chunguang
Construction Safety Evaluation for Prefabricated Concrete-Constructions based on Attribute Mathematics
Chang, Fei
Influence of Hygrothermal Environment on Absorption and shear strength of CF3031/CCF300 stiffened composite panel
Chang, Fei
Influence of crack arresting rib on the fracture characteristic of integral wing-spar
Chang, Hsing-Cheng
A Wireless Surface Acoustic Wave-based Tire Pressure and Temperature Sensing Module
Chang, Xueting
Study on Islanding Strategy for Fault Recovery of Distribution Network with Micro Grid
Chang, Zongyu
Dynamics and Vibration Analysis of Delta Robot
Che, Zhigang
The residual stress distribution and fatigue property of TC4 laser-welded joint treated by laser shock peening
Chen, Bo
Numerical Simulation Analysis of Ultrafine Powder Centrifugal Classifier
Chen, Guobin
The Prediction Method of Actual Traffic Based on ARMA and Wavelet Transform
Chen, Hang
Cluster Analysis and Principal Component Analysis Application in Primary Health Care Institutions
Chen, Hang
Prediction Model of Multiple Linear Regression Analysis in Grain Production
Chen, Hanyi
Removal of Reactive Brilliant Red X-3B and Co(II) Ion with Amino-EDTA Functionalized Silica Gel
Chen, Hanyi
Adsorption of Acid Orange II and Cu(II) Ion with Amino-EDTA Modified Silica Gel
Chen, Hui
Removal of Organics in Landfill Leachate by Microwave-enhanced Fenton Process
Chen, J.H.
Seepage stability study on gravel soil slope in Jin’an bridge station reservoir
Chen, Jianhua
Ventilation Method Assessment of the Average Permeability of the Fractured Granite Rock Mass around Tunnel
Chen, Jianjun
Design of High Performance SRAM Based on Single-Port Sense Amplifier
Chen, Jilu
pH responsive and size-controllable vesicles from terminal-carboxyl hyperbranched polyester
Chen, Jing
Design of Digital Reading Interface Considering User Experience
Chen, Jingwen
Synthesis of Luminescent Lanthanide-based MCM-41 Mesoporous Material by a Novel Route
Chen, Jun
Down-regulation of MEF2D via HBc Nanoparticle Mediated siRNA Inhibits HepG2 Cell Proliferation in vitro
Chen, Kai
Experimental Study about the Low Temperature Pulverization of Pellets
Chen, Li
Genetic Algorithm Combining Operation Tree (GAOT) for concrete performance
Chen, Li
Synthesis of Luminescent Lanthanide-based MCM-41 Mesoporous Material by a Novel Route
Chen, Liupo
Geometric modeling design and vibration modal analysis of wind turbine generator blade
Chen, Ming
A Novel Visual Attention Framework using Unsupervised Feature Learning for Road Scene Understanding
Chen, Mingli
Ozone pre-oxidation to the degradation technology research of MC-LR under the condition of different Ph
Chen, Qing
Study on Distribution Law of Multicomponent Gases in Coal Mine Gob in a Numerical Simulation Way
Chen, Rong
Image Dehazing Based On Image Enhancement Algorithm
Chen, Rongrong
Studies on modeling a single-bellows air spring and simulating its inherent characteristics
Chen, Shaou
Electrochemical performances discharged to lower potential for LiNi0.5Mn1.5O4 cathode material synthesized by PAA-assisted co-precipitation method
Chen, Shifu
Experimental Study about the Low Temperature Pulverization of Pellets
Chen, Sitao
The Machinability and Wear Mechanism of TiN Coated Tools in Dry Turning of AISI 4119
Chen, Song
The Design of High-Efficiency and Synergetic Attendance System
Chen, Suiyuan
FeCoNiAlTiCrSi high entropy alloy coating prepared by laser cladding
Chen, W.
Research status and analysis of technology application for magnetic adsorption wall-climbing robots in China
Chen, Wenkai
Experimental Study about the Low Temperature Pulverization of Pellets
Chen, Wenzhao
Particle Flow Simulation of Effect of Pushing Against Soil of Static Driven Piles
Chen, Wenzhi
Tracking and Positioning Mechanism for Mobile Intrusion Nodes
Chen, Xiang-en
The Evolutionary Relationships Between Tree Type of Network Models For The Internet of Things
Chen, Xiangdong
Study on the realization method of the high-speed train full return air mode
Chen, Xiangguang
Research and Application of PIMS in Automobile Tire Tread Production
Chen, Xiangguang
Study on Automatic Measuring Method of Total Sugar Content in Chlortetracycline Fermentation Tank
Chen, Xiaozhou
DNA Methylation Analysis Methods for Cancer Research
Chen, Xin
A Corpus-based Study of the Structures and Functions of Academic Chunks in the Discipline of Engineering
Chen, Xuan
Research of tooling test signal collection and analysis
Chen, Yahui
A Wireless Surface Acoustic Wave-based Tire Pressure and Temperature Sensing Module
Chen, Yang
A Low-Latency Seismic Recorder for Earthquake Early Warning
Chen, Yang
An Innovative Structure of Information Security Equipment for Remote Control
Chen, Yanwei
An environmentally friendly carbon material and its composite with MnO2 as an electrode material for a supercapacitor
Chen, Ying Jian
Protecting Environmental Sustainability by Use of Energy Materials
Chen, Yiwei
Numerical Simulation Analysis of Ultrafine Powder Centrifugal Classifier
Chen, Yu
Dynamic characteristics analysis of hydraulic pipes on anti-rolling Suspension system
Chen, Yue
The Research and Application of the Fingerprint Key based USB-Key Pin Number Protection System
Chen, Zihong
Speech Endpoint Detection Based on EMD and Higher Order Statistics in Noisy Environments
Cheng, F.Q.
A Non-cooperative Game Model for Workload Allocation and Its Implementations in Plastic Mould Shop
Cheng, Hu
Novel Technology for the Preparation of Thermal Spray Aluminium Bronze / Nano-SiC Composite Coating
Cheng, Ling Long
Stability Study of Single-abrasive Coupled Flutter in Ultrasonic Vibration Honing
Cheng, Shikun
Study on the reverse osmosis in concentrating phosphorus from simulated biogas slurry
Cheng, Yong
Mechanism based on pipe cleaning apparatus of high-pressure water jet
Chu, Yefeng
Design of the Annular Pulse Generator Based on Quartus II
Cui, Hongzhi
Study of thermal performance of building using glass curtain wall with phase change material (PCM)
Cui, Yuanlu
Preparation of a Thermosensitive Guanidine-Chitosan/Poloxamer in situ Gel for Intranasal Delivery System
Cui, Yuanlu
A Novel Ca-Alginate Nanogel Mediated by Glycyrrhizic Acid
Dai, Xueyu
Seepage stability study on gravel soil slope in Jin’an bridge station reservoir
Dai, Ya-ping
The Appliance of Duffing Chaotic Detection system in displacement measurement of capacitance sensor
Dai, Yaping
Motor Fault Detection and Diagnosis Based on Negative Selection Algorithm
Dai, Yueming
The Design of Vehicle Antenna Servo Control System Based on Ziegler Nichols PID Control
Dai, Zhongjian
Motor Fault Detection and Diagnosis Based on Negative Selection Algorithm
Deng, Hui
Numerical Analysis for Heat and Mass Transfer of Pure Vapour Condensation in Inclined Flat Finned Tube