Proceedings of the International Conference on Railway and Transportation (ICORT 2022)

<Previous Article In Volume
Next Article In Volume>

Prototype of Making Endpost Rail Joint on Railroads Made of CFRP (Carbon Fiber Reinforcement Plastic)

Authors
Fadli Rozaq1, *, Mudayat Adi Prastyo1, Damar Isti Pratiwi1, Natriya Faisal Rachman2, Willy Artha Wirawan1
1Teknologi Mekanika Perkeretaapian Politeknik Perkeretaapian Indonesia, Jalan Tirta Raya I, Madiun, 63129, Indonesia
2Teknologi Elektro Perkeretaapian Politeknik Perkeretaapian Indonesia, Jalan Tirta Raya I, Madiun, 63129, Indonesia
*Corresponding author. Email: fadli@pengajar.ppi.ac.id
Corresponding Author
Fadli Rozaq
Available Online 31 March 2023.
DOI
10.2991/978-94-6463-126-5_13How to use a DOI?
Abstract

Endpost is a component that separates two connected rails to prevent a short circuit in the rail line. The purpose of the research was to improve the mechanical properties of the endpost in terms of pressure and the value of electrical insulation. The study used an experimental approach, aiming to determine the increase of the mechanical properties of the endpost made of carbon fiber with various compositions. After making the endpost composite specimen, it carried out a compressive test and an insulator resistance test to determine the maximum load strength and stress of the composite endpost. From the compressive test and the insulator test, it obtained the maximum pressure at 7.00 Mpa based on the 80%:20% epoxy-carbon fiber composition which had the highest pressure strength value of several test specimens in the compression test. And, the endpost composite insulator resistance test, the endpost composite specimen obtained a resistance value of 50 kΩ in a voltage test of 250 kV.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference on Railway and Transportation (ICORT 2022)
Series
Advances in Engineering Research
Publication Date
31 March 2023
ISBN
10.2991/978-94-6463-126-5_13
ISSN
2352-5401
DOI
10.2991/978-94-6463-126-5_13How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Fadli Rozaq
AU  - Mudayat Adi Prastyo
AU  - Damar Isti Pratiwi
AU  - Natriya Faisal Rachman
AU  - Willy Artha Wirawan
PY  - 2023
DA  - 2023/03/31
TI  - Prototype of Making Endpost Rail Joint on Railroads Made of CFRP (Carbon Fiber Reinforcement Plastic)
BT  - Proceedings of the International Conference on Railway and Transportation (ICORT 2022)
PB  - Atlantis Press
SP  - 118
EP  - 125
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-126-5_13
DO  - 10.2991/978-94-6463-126-5_13
ID  - Rozaq2023
ER  -