The Fracture Properties of Injection Molding PC/ABS Blend
MingHsiung Ho, PinNing Wang, JungPeng Yeh
Available Online January 2016.
- https://doi.org/10.2991/ifeea-15.2016.73How to use a DOI?
- PC/ABS, Blend, Injection Molding Condition, Fracture Toughness, Skin layer
- PC/ABS blend has widely used in vehicle industry. In this dissertation, fracture toughness of PC/ABS blend was studied. The specimens were prepared under various injections molding conditions, such as filling time, melting temperature and mold temperature. The fracture mechanisms were examined with a scanning electron microscopy. The following conclusions can be drawn from the tests. The best injection molding condition of fracture toughness specimen was filling time 2 seconds, melting temperature 260°C and mold temperature 55°C. The fracture toughness is varied with according with skin layer normalized thickness. The stress-whiten, splits and fibril-like surfaces were typical fracture mechanisms.
- Open Access
- This is an open access article distributed under the CC BY-NC license.
Cite this article
TY - CONF AU - MingHsiung Ho AU - PinNing Wang AU - JungPeng Yeh PY - 2016/01 DA - 2016/01 TI - The Fracture Properties of Injection Molding PC/ABS Blend BT - 2015 2nd International Forum on Electrical Engineering and Automation (IFEEA 2015) PB - Atlantis Press SP - 344 EP - 348 SN - 2352-5401 UR - https://doi.org/10.2991/ifeea-15.2016.73 DO - https://doi.org/10.2991/ifeea-15.2016.73 ID - Ho2016/01 ER -