Proceedings of the 2016 International Conference on Innovative Material Science and Technology (IMST 2016)
350 authors
- Li, Chao
- Investigation of load imbalance in the hybrid atomistic-continuum simulation based on geometric coupling
- Li, Chunming
- Fe-based amorphous soft magnetic powders fabricated by water atomization
- Li, Donghai
- Orthogonal experiment optimum design for GFRP wind turbine tower
- Li, Fagen
- Analysis of corrosion perforation of a gas gathering carbon steel pipeline in a western oilfield in China
- Li, Fuguo
- Microstructure simulation and mechanical properties of aisi1050 disk during quenching process
- Li, G.F.
- Effects of Cl- concentration on corrosion behavior of carbon steel and super13cr steel in simulated oilfield environments
- Li, Genmei
- Preparation of foamed commercially pure aluminum by air pressure infiltration process
- Li, Jianjun
- Field joint coating technology for horizontal directional drilling of oil and gas pipeline
- Li, Kang
- Research of long distance temperature measuring instrument based on ADT70
- Li, Lei
- Analysis of corrosion perforation of a gas gathering carbon steel pipeline in a western oilfield in China
- Li, Lei
- Analysis on cracking of repaired tubing used in surface gas injection pipeline in a western oilfield in China
- Li, Liang
- Research of long distance temperature measuring instrument based on ADT70
- Li, Qianqian
- Functional evaluation of bacterial surface displayed P domain from human norovirus capsid proteins
- Li, Shibin
- Effect of auxiliary on the properties of SnO2 nano-cystalline prepared via hydrothermal method
- Li, Sigui
- Research progress of building insulation materials at home and abroad
- Li, Tao
- Effect of auxiliary on the properties of SnO2 nano-cystalline prepared via hydrothermal method
- Li, Tiesheng
- Studies on monolayer and langmuir-blodgett films of schiff-base complex 1,2-bis(3-thiophene imine) ethylene
- Li, Weibing
- Study of fragment in different shapes oblique penetration on circular tube
- Li, Weimin
- Chopped carbon fiber reinforced CeO2/PMMA/PVDF superhydrophobic composite coating with enhanced abrasion durability
- Li, Xiaobo
- Strength calculation of frame structure of high-performance low speed diesel engine
- Li, Xiaoli
- Analysis of UV-LED curing technology and existing problems of varnish for printed matter
- Li, Yong
- Fe-based amorphous soft magnetic powders fabricated by water atomization
- Li, Yongtang
- Microstructure simulation and mechanical properties of aisi1050 disk during quenching process
- Li, Yue
- Analysis of contact between barrel and projectile of a rifle based on finite element method
- Li, Zetian
- Application of poly(butylenes succinate) as migration resistant plasticizer for poly(vinyl chloride)
- Li, Zetian
- Mechanical and morphology properties of Poly(butylene succinate) reinforced by magnesium hydroxide sulfate hydrate whisker
- Li, Ziqi
- Preparation of carboxymethyl chitosan microspheres and the adsorption of heavy metal cadmium
- Lin, Guochang
- Transmission loss of thin membrane-type acoustic metamaterials with multi-masses
- Lin, Kai
- Analysis on cracking of repaired tubing used in surface gas injection pipeline in a western oilfield in China
- Lin, Lusheng
- The application of warm mix asphalt technology in China: a review
- Lin, Lusheng
- Analysis on treatment of covered karst foundation of high-rise building in Shenzhen area
- Lin, Song
- Seismic performance of RC frame structures with magnesium-steel seismic reduction braces
- Lin, Song
- Preliminary analysis of double-plateau ground motions of recent great earthquakes
- Liu, Guangsheng
- Analysis of contact between barrel and projectile of a rifle based on finite element method
- Liu, Guangsheng
- Application of transient acoustic signal and rough sets in compound-fault diagnosis of bearing
- Liu, Haiming
- Design spectra for vertical earthquake action in the new version of guidelines for seismic design of highway bridges of China
- Liu, Hui
- Studies on monolayer and langmuir-blodgett films of schiff-base complex 1,2-bis(3-thiophene imine) ethylene
- Liu, Juan
- Mechanical and morphology properties of Poly(butylene succinate) reinforced by magnesium hydroxide sulfate hydrate whisker
- Liu, Jun
- Effect of heat treatment on the mechanical properties of TiAl alloy
- Liu, Lizhen
- Wastewater treatment processes for industrial organosilicon wastewater
- Liu, Qiang
- Nonlinear bending behavior of EMC laminates at elevated temperatures
- Liu, Sumei
- The application of warm mix asphalt technology in China: a review
- Liu, Sumei
- Analysis on treatment of covered karst foundation of high-rise building in Shenzhen area
- Liu, Wenhong
- Analysis on cracking of repaired tubing used in surface gas injection pipeline in a western oilfield in China
- Liu, Xining
- A case study of interior booming noise control in an HEV
- Liu, Yang
- A case study of interior booming noise control in an HEV
- Liu, Yiqing
- Finite element analysis of retaining wall for high slope
- Liu, Yuetao
- Application of poly(butylenes succinate) as migration resistant plasticizer for poly(vinyl chloride)
- Liu, Yuetao
- Mechanical and morphology properties of Poly(butylene succinate) reinforced by magnesium hydroxide sulfate hydrate whisker
- Liu, Zhen
- Fine log interpretation model of reservoir in Huatugou oilfield
- Long, Yan
- Analysis of corrosion perforation of a gas gathering carbon steel pipeline in a western oilfield in China
- Lu, Qin
- Analytical solution on transient aerodynamic heating of hypersonic vehicle hot structure
- Lu, Yuhui
- An experimental investigation of ground resonance and air resonance of bearingless model rotor
- Luan, Chunfan
- Determination of silver content in anticancer drug Miriplatin hydrate by UV spectrum
- Luo, Guoling
- Mathematical model for force state on the fit surface of a composite back-up roll in four-high mill strip cold rolling
- Luo, Shiyong
- Analysis of UV-LED curing technology and existing problems of varnish for printed matter
- Luo, Shunjie
- Study on indoor pavement performance of diatomite-modified asphalt mixture
- Ma, Qing
- Comparative analysis of punching shear strength for reinforced concrete slabs based on database
- Manas, David
- Micro-hardness of surface layer of irradiated polypropylene
- Manas, David
- The influence of the injection molding on mechanical properties of EPDM rubber testing samples
- Manas, David
- Mechanical properties of modified HDPE by ionizing radiation after temperature load under and above the pure HDPE melting temperature
- Manas, Miroslav
- Micro-hardness of surface layer of irradiated polypropylene
- Manas, Miroslav
- Mechanical properties of modified HDPE by ionizing radiation after temperature load under and above the pure HDPE melting temperature
- Mao, Kelin
- Analysis of UV-LED curing technology and existing problems of varnish for printed matter
- Meng, Ruiqiang
- Analysis of UV-LED curing technology and existing problems of varnish for printed matter
- Mi, Yilin
- Spin polarization in organic semiconductors
- Miao, Xinwei
- Seismic behavior of composite walls of sludge ceramsite foamed concrete block
- Mizera, Ales
- Mechanical properties of modified HDPE by ionizing radiation after temperature load under and above the pure HDPE melting temperature
- Mizera, Martin
- Micro-hardness of surface layer of irradiated polypropylene
- Nie, Qiuyue
- Antenna radiation enhanced by a negative permittivity material: plasma
- Niu, Chao
- Fine log interpretation model of reservoir in Huatugou oilfield
- Niu, Mengya
- Functional evaluation of bacterial surface displayed P domain from human norovirus capsid proteins
- Niu, Xiaoxiao
- Strength calculation of frame structure of high-performance low speed diesel engine
- Ovsik, Martin
- Micro-hardness of surface layer of irradiated polypropylene
- Ovsik, Martin
- The influence of the injection molding on mechanical properties of EPDM rubber testing samples
- Pang, Yishan
- Experimental study on deposition effect of Fe-based grouting inducers in silts
- Peng, Chaoyi
- Chopped carbon fiber reinforced CeO2/PMMA/PVDF superhydrophobic composite coating with enhanced abrasion durability
- Pu, Shaoping
- Determination of silver content in anticancer drug Miriplatin hydrate by UV spectrum
- Pu, Shuang
- Comparative analysis of punching shear strength for reinforced concrete slabs based on database
- Qi, Huiping
- Microstructure simulation and mechanical properties of aisi1050 disk during quenching process
- Qian, Feng
- An experimental investigation of ground resonance and air resonance of bearingless model rotor
- Qiao, Chunyu
- Electrochemical hydrogen storage behaviors of nanostructured La1-xSrxCoO3 (x = 0-1.0) prepared by sol-gel method
- Qiao, Hongchao
- Effect of heat treatment on the mechanical properties of TiAl alloy
- Qin, Huanyao
- Research on electrodes and electrolyte active substances of metal modified battery
- Qu, Wenjun
- Research on the bending moment-curvature relationship of wide notch concrete beam strengthened with EBR CFRP plate
- Rao, Guanghui
- Microstructure and hydrogen storage properties of V40Ti20Cr32Fe8 alloy by heat treatment
- Ren, Xiaoguang
- Investigation of load imbalance in the hybrid atomistic-continuum simulation based on geometric coupling
- Ren, Zhenhua
- Research on the bending moment-curvature relationship of wide notch concrete beam strengthened with EBR CFRP plate
- Reznicek, Martin
- The influence of the injection molding on mechanical properties of EPDM rubber testing samples
- Rong, Maohua
- Microstructure and hydrogen storage properties of V40Ti20Cr32Fe8 alloy by heat treatment
- Rong, Shaofeng
- Functional evaluation of bacterial surface displayed P domain from human norovirus capsid proteins
- Senkerik, Vojtech
- The influence of the injection molding on mechanical properties of EPDM rubber testing samples
- Shan, Lihua
- The Xiaojiashan Tungsten deposit in the Barkol district, Xinjiang, China: geological features and ore-forming fluid composition
- Sheng, Liping
- Chopped carbon fiber reinforced CeO2/PMMA/PVDF superhydrophobic composite coating with enhanced abrasion durability
- Sheng, Y.X.
- Effects of Cl- concentration on corrosion behavior of carbon steel and super13cr steel in simulated oilfield environments
- Skrobak, Adam
- The influence of the injection molding on mechanical properties of EPDM rubber testing samples
- Song, Changjiang
- Fe-based amorphous soft magnetic powders fabricated by water atomization
- Song, Jianfeng
- Mathematical model for force state on the fit surface of a composite back-up roll in four-high mill strip cold rolling
- Song, Jieguang
- Effect of auxiliary on the properties of SnO2 nano-cystalline prepared via hydrothermal method
- Song, Ming
- Research on the buffering effect of rubber on the Non-Axial symmetry explosive loading