Proceedings of the 2015 International Conference on Management, Education, Information and Control
Session: Control
54 articles
Proceedings Article
Fuzzy Control of Batteries Fast Charging for HEV in Regenerative Braking
Zhumu Fu, Aiyun Gao
In this paper, a fuzzy controller is constructed on the basis of the hybrid electric vehicle’s (HEV’s) batteries fast charging during regenerative braking. The proposed method is based on Mascc law and the mathematical relationship between open circuit voltage with the internal resistance model and charge...
Proceedings Article
The Exploration on Innovative Teaching Mode for Graduates Who Major in Software Engineering
Jun Hu, Bocheng Liu, Ai Chen
Innovative education is an important topic during the process of talent training in the era of higher education. It is a direction of graduate’s education innovation to cultivate the innovative and high-quality talents. In this paper, aiming at cultivating MS Software Engineering, the authors combine...
Proceedings Article
Effects of Seed Soaking with La(NO3)3 on Anti-oxidization System of Soybean Roots
Tianhong Zhao, Tong Zhou, Wei Wang, Wanyu Li
Rare earth (RE) is extensively applied in China, especially in agriculture. This experiment investigated the effects of seed soaking with lanthanum nitrate [La-0(CK), La-50(50mg·L-1), La-100(100 mg·L-1) and La-150(150 mg·L-1)] on reactive oxygen species, anti-oxidative substrates, anti-oxidative enzymes...
Proceedings Article
Design of a Small Movable Lifting Machine Overall Structure
Yingchun Liu
The paper is mainly on the overall structural design of small movable lifting machine . First of all, it selects the main components, the need to include: H-K201 micro electric hoist, steel wire rope and bearing. Then it comes to the corresponding design calculation, including the requirements for welding,...
Proceedings Article
The Cooling Simulation of Microwave Chip Based on I-DEAS ESC
Bin Ye
This paper mainly studies the cooling of microwave chip, based on ESC I-DEAS. Firstly, the ESC thermal analysis theory is studied, and then the finite element model of microwave chip is set up. In the third part, the calculation results are analyzed. Finally, the simulation studies are summed up.
Proceedings Article
The Structure Design and Analysis of Hydraulic Power Unit
Chang Li
In this paper, the structural design of a hydraulic power unit is analyzed. Firstly, the hydraulic transmission is introduced, and then the innovation and development of hydraulic technology are analyzed from two aspects of hydraulic field bus technology and hydraulic pressure system. The structure of...
Proceedings Article
Evaluation of Chinese Online Tourism and Travel Service Providers from the Users' Perspective
Zhiyang Jia, Ding Li, Wei Gao
As the Internet develops faster, it has also become more useful. Many Chinese Internet users utilize online tourism and travel services for vacation and travel. To evaluate the prevalent online tourism and travel service providers, this paper selects five of the most popular providers in China, including...
Proceedings Article
Design of Data Acquisition System for Engine Experiment
Xinli Wang, Ping Xu, Jianping Bi
With the development of computer technology, data acquisition can reduce the heavy manual recording and ensure accurate and effective experiments. Engine experiment data acquisition system is designed in this paper. First the system hardware is completed and the sensor processing circuit is done based...
Proceedings Article
Research on Design Method of Mechanical Systems Man-machine Interface
Fei Zhou, Guomin Lin, Miao Shang, Changke Tan
The traditional design method of man-machine interface of mechanical system is introduced, and the evaluation method of man-machine interface of mechanical system is put forward. On the basis of the evaluation of man-machine interface of mechanical system, the characteristics of man-machine interface...
Proceedings Article
Study on the Technology of Electric Vehicle
Yingchun Liu
This paper mainly studies the related technology of electric vehicle. Firstly, it introduces the definition and classification of electric vehicle briefly, then it studies the working principle and the key technology of pure electric vehicles, hybrid vehicles and fuel cell vehicles. Next the electric...
Proceedings Article
Research on the Path Planning in Desulfurization Plant
Jian Du, Wenjie Xie
With the gradual improvement of urban construction, hydrogen sulfide detection in desulfurization plant becomes increasingly intelligent. To solve the problem of the detecting robot automatic charging path planning in desulfurization plant, this paper presents an improved global path planning algorithm...
Proceedings Article
Static Performance Analysis of Water-Lubricated Hydrostatic-Dynamic Hybrid Bearing Regulated by Multi-Head Pump
Jianhua Zhao, Dianrong Gao
Due to the complex structure, the difficult calculation process of the bearing force and many influence factors of static performance of Water-Lubricated Hydrostatic and Dynamic Hybrid Bearing, the static performance index and influence rule are hardly to be explored and mastered by the engineer, and...
Proceedings Article
Three-dimensional Geological Modeling Methods and Applications - A gold belt Oilfield
Xiang Li
The ideas and methods of modeling are: According to each well in the simulation area geology, well logging data, combined with deposit information to geostatistics theory, establish the spatial distribution of the various geological parameters model, using interpolation techniques to predict the geological...
Proceedings Article
Importance Analysis of Influencing Factors on Cloud Service Composition Flexibility from the Service Provider Angle
Kai Liu, Xiaotao Yang
The influencing factors of cloud service composition flexibility were analyzed from the service provider angle; a Bayesian network model was built to analyze the importance of influencing factors on cloud service composition flexibility from the service provider angle, and the critical and non-critical...
Proceedings Article
Antimicrobial Efficacy of Methanobactin against Bacillus Subtilis
Haili Xing, Jiaying Xin
Methanobactin is a novel extracellular fluorescent chromopeptide produced by methanotrophys. Its recent characterization has placed it in a new class of compounds, which is now known as chalkophores. They are analogous to iron-binding siderophores. The present study investigated the antimicrobial efficacy...
Proceedings Article
Analysis of Static Magnetic Field of Electric - Machine Converter
Cangke Tan, Chonglou Tong, Fei Zhou, Yuankun Xu
Electricity-machinery converter is the input unit of electro-hydraulic proportional valve and mechanical and electrical switching device, and the input electrical signal is proportionally converted into mechanical quantity by electricity-machinery converter. The moving coil electromechanical converter...
Proceedings Article
Research of Light Vehicle’s Electronic Stability Programs and Semi-Active Suspension Comprehensive Control
Manzhen Wang
With the development of science and technology, active safety of vehicles is receiving more and more attention. Currently, active safety products that have already been developed and applied to vehicles include: ABS (Anti-lock Brake System), ASR (Acceleration Slip Regulation), TCS (Traction Control System),...
Proceedings Article
Research on the Knowledgeable System of Excavator Based on Ontology
Xinyu Wu
The knowledgeable system of excavator takes the existing computer model as main content which involves a glittering array of knowledge, including engineering, design, services, and computer information technology etc which is a complicated system project. This paper aims to analyze its connotation in...
Proceedings Article
Research on Sedimentary Microfacies of P Oil Layer Group in S Oilfield
Xiaoyu Yang, Ning Gan, Hao Zhang, Liang Zhang
Based on the static and dynamic data of hydrocarbon reservoir achieved from each stage, guided by high-resolution sequence stratigraphy and delicate fluviatile sedimentology, this paper completed the research on sedimentary microfacies of P oil layer group within the research scope, which belongs to...
Proceedings Article
Car Inside Beam Enhanced Cold Stamping Mould Design
Quanzhong Jia
This paper is on the study of cold stamping drawing die of a vehicle inner beam enhanced. Firstly, it determines the stamping parts process plan. Then it draws the die design, including the design of the main structure of the mold design and mold auxiliary parts. Finally, it analyzes the die working...
Proceedings Article
Design and Manufacturing of Cover Plate Parts
Xuezhong Wei
First of all, this thesis describes the cover parts of mechanical design part, including cover parts material, a cover plate parts of structure, process analysis, blank and the process dimension tolerance, covering parts processing route formulation, processing route, covering plate parts of machine...
Proceedings Article
Research on Simulation Technology Application on Higher Education for Deaf/hard-of-hearing Students in China
Dengfeng Yao, Zhili Liu, Junxia Yan, Yunfeng Qiu
In teaching of computer language, how to improve their hearing of hearing-impaired students featured with special physiological characteristics and reduce the inconvenience and obstacles caused during teaching knowledge in the most effective way This paper has applied the simulation technology and developed...
Proceedings Article
Research on the Key Technologies of Intelligent Vehicle Control
Wenming Cheng
The intelligent vehicle, as the key technology of intelligent transportation system, is one of the numerous high-tech integrated carriers. It is a general term that refers to a comprehensive vehicle technology to complete one or many driving tasks entirely or partially. The research work of this paper...
Proceedings Article
Theoretical and Experimental Study on Active Vibration Control of Smart Structures
Zhou Li
The application of intelligent material systems and structures is very extensive, which is not only in sophisticated weapons for national defense such as aircraft, ships, but also in various fields of the national economy. They are of great strategic significance especially in the field of high technology....
Proceedings Article
Research on fuzzy control of the vehicle’s semi-active suspension
Zhengke Chen
The suspension is one of assembly of the modern automobile, the general term of all the force transfer devices between a frame (or chassis and body integral construction) and axle (or wheel). Its main function is to transmit the vertical reaction (supporting force), longitudinal reaction (traction and...
Proceedings Article
The research and development of the vehicle’s lateral anti-collision warning system
Hongying Li
The car brings modern civilization to people as well as great and startling harm. Especially in recent years, with the development of the expressway and the high speed of vehicles, malignant traffic accidents occurr from time to time, bringing huge losses to people's lives and property. Traffic accidents...
Proceedings Article
The Establishment and Application of Synthetically Stiffness Knowledge Model of the Steering System
Xufeng Wang
The components of the steering system, especially some bars and scaffolds, have certain elasticity, which makes the actual steering angle of steering wheel be smaller than the angle that is converted according to the transmission ratio of the steering angle when the driver turns the steering wheel, so...
Proceedings Article
Research on Testing Technology of Aviation Tire Based on Laser Nondestructive
Miao Shang, Min Ji
The article introduces a kind of major nondestructive testing technology about aviation tire--laser digital displacement speckle tires, the working principle of nondestructive testing technology, test equipment, test methods and defect, and adopt the detection technology of manufacturing equipment and...
Proceedings Article
Ultrasonic Testing Technology of Boiler &Pressure Vessel
Min Ji, Jingfeng He, Pengfei Ji
Combined with the analysis of the principle of ultrasonic inspection technology, from the fillet weld of pressure vessel, pressure vessel wall crack and pressure vessel head tube plate crack ultrasonic inspection technology is discussed in the application of the boiler pressure vessel defect detection.At...
Proceedings Article
Adaptive Fuzzy Sliding-Mode Control of Uncertain Nonlinear System
Wenda Zheng, Gang Wu, Gang Xu, Xiangchun Chen
This paper presents an adaptive sliding-mode control algorithm for uncertain nonlinear system. It is very difficult to obtain the exact knowledge and it is required to approximate an unmolded dynamics with a nonlinear component. Therefore, a fuzzy basis function network is applied to approximate the...
Proceedings Article
Math Design of the Airborne Evaporation Circulatory System
Yinsai Guo, Yi Zhang, Mengyi Zhang, Xiangfu Zeng
The researches on a vapor cycle system start late in China. The vapor cycle cooling system is not a mature technolog . With the aid of advanced refrigeration technology at home and abroad, this paper focuses on research and development of the vapor cycle cooling system of the helicopter. Based on the...
Proceedings Article
Experimental Research on Seismic Performance of Rigid Joint between Steel Beam and Concrete Wall
Li Guo, Xianglan Li
In recent years, steel-concrete composite structure has been widely applied in high-rise buildings of China, recent related studies mainly focus on the relative displacement between the structure layer control of the structural system under the seismic effect and structural failure type under the rare...
Proceedings Article
Applied Research of Solidified Soil Characteristic Test on Water Conservancy Project
Ouyang Yong
The curing technology of soil has received growing concern in civil engineering. Therefore, researches of its characteristics have academic significance and practical worthiness. The application in water conservancy project has obvious effects on resources saving, flood prevention, danger elimination,...
Proceedings Article
On-line Detection Method of Quality Defects in Manufacturing Process based on Wavelet Finite Element
Bin Zeng, Yuxi Wang, Quanming He, Xiaoli Jiang
In this paper, researchers use a wavelet-based solution to enhance the adaptive finite element method flaw inherent frequency beam, and study to conclude a particular state and the intrinsic link between the modal parameters, and establish a precise qualitative and quantitative identification based on...
Proceedings Article
The Pre and Post-Processing in Finite Element Analysis on the Technology and Programming of Plane Reinforced Concrete based on AutoCAD Platform
Ying Zhao
At present, reinforced concrete finite element method, as an effective numerical method has been widely applied and is officially listed as one of the design approaches for non-member reinforced concrete structure reinforcement in Design Specification for Hydraulic Concrete Structure. Finite-element...
Proceedings Article
Microwave Kill Root Nematodes Based on the Arduino Automatic Control System
Sheng Liu, Aisheng Ma, Xiumei Zhang
For vegetable planting industry, root nematode is a kind of stubborn disease and insect pest. In order to improve the effect of kill root nematodes, the researchers use arduino as the core controller, use the touch switch and a temperature sensor through the sensor feedback signal, then change the pulse...
Proceedings Article
Analysis of Time-dependent Reliability of Concrete Gravity Dam Damage Based on Gray Theory
Fanghua Liu, Hezhi Li
This paper applies the reliability theory, carries out time-dependent reliability over concrete gravity dam based on gray theory and damage theory, and applies the theory to practical engineering. Specific work are: 1. Apply the gray theory, build the GM model to analyze, supplement and predict the change...
Proceedings Article
Research and CAD Application of the Lifting Mechanical Model based on the Mast Structure
Ying Zhao
Mast crane integral installation technology is one of the ten new technology in construction field which are put forward by the ministry of construction and are in key application. It is widely widely applied in the field of construction engineering. But, at present, the design of the mast crane hoisting...
Proceedings Article
The Simulation Study of Auto-disturbance Rejection Controller on Unmanned Tracked Vehicle Steering
Lin Yao, Hongwei Yang, Hanqing Zhao
Motion control of autonomous vehicles is a key technology in the research field of unmanned vehicles and is of great importance in the operative part of autonomous driving. This paper regards a certain type of crawler as the controlled object. First of all, the paper establishes a vehicle steering kinetic...
Proceedings Article
The Design and Implementation of Dynamic Time History Analysis on Architectural Structure CAD System
Qiu Lin
This paper firstly elaborates aseismic design theory and the development as well as research condition of CAD to briefly explain the function and necessity of dynamic time history analysis in architectural structure design. Then, it comes up with particular views for the advancement of architecture structure...
Proceedings Article
Application of Geostatistical Inversion Data in Thin Sand Body Modeling
Qiang Wang
On the basis of understanding the reservoir characteristics of Block S, this paper established the sand body and oil reservoir property model with geostatistical inversion data, in combination with geological modeling technology and petrel software under the restriction of sandstone vertical probability...
Proceedings Article
Research on Arch Effect between Anti-slide Piles and Soil Pressure on Pile Sheet
Li Guo, Xianglan Li
At present, the anti-slide piles are widely applied in the field of geotechnical engineering such as the railway, highway, hydropower, municipal and mining engineering due to its advantages of small masonry, large anti-slide resistance, good retaining effect, and so on. With the extensive application...
Proceedings Article
Optical Properties of Er3+-doped Li2O-SrO-ZnO-Bi2O3 Glasses
Zhiwen Lin, Shiqing Man
Er3+-doped Li2O-SrO-ZnO-Bi2O3 (LSZB) glasses that are suitable for optical amplifier applications have been fabricated through the conventional melt-quenching method, and the spectroscopic properties of Er3+ in the glasses were characterized. The density, the refractive indices, the optical absorption,...
Proceedings Article
Thulium-doped Sodium Zinc Molybdenum Tellurite Glasses
Jin Zheng, Shiqing Man
Researchers propose and demonstrate Sodium Zinc Molybdenum Tellurite glasses (Na2O-ZnO-MoO3-TeO2 or NZMT) as suitable hosts for rare earth ion thulium (Tm3+) operating at 1.47 mm wavelength. The density, the refractive indices, the optical absorption have been measured. The Judd-Ofelt intensity parameters...
Proceedings Article
Numerical Analysis and Study on Land Subsidence of Tunnel Construction
Hezhi Li, Fanghua Liu
With the development of economy, the urban population has increased dramatically; in the process of urban construction, more and more tunnels are built in order to facilitate people’s life. Tunnel construction will inevitably cause land subsidence; the buildings on the ground and the normal use of underground...
Proceedings Article
Research on Dedicated Primary School bus Equipment Performance and Safety Standards Based Technology
Songlin Zou
China's auto industry management focus has shifted to the fields of relationship security, environmental protection, energy, security and other personal safety and health; to mandatory standards formulated by the state-oriented implementation of strict market access system. On the basis of the relevant...
Proceedings Article
Throughput Capacity of Hybrid Multi-channel Vehicular Ad Hoc Networks
Lin Chen
The throughput capacity of hybrid multi-channel Vehicular Ad hoc Networks is addressed in the paper. Both the theoretic upper and lower bounds are obtained. Moreover, both single road and grid road are analyzed. The results show that the movement has little influence on the throughput capacity of hybrid...
Proceedings Article
Preparation and Study of Conductive Fabric
Xiaojun Yang, Wei Hong, Xiuhong Zhao, Fei Mi, Jielin Wang, Heng Zhang, Jianwen Gao
In this paper, conductive polyester fabric be prepared by site adsorption polymerization. The effects on the electrical properties of fiber by the alkali treatment, aniline monomer concentration, oxidant concentration, the dopant concentration, further doping and other factors. Optimize experimental...
Proceedings Article
Bridge Inspection and Reinforcement Technology Application
Hezhi Li, Fanghua Liu
Most of the bridges built in 1950s and 1960s and even in 1970s have been beyond service period and have a lot of damages and defects, which are difficult to adapt to the rapid development of transportation today. If all these bridges are dismantled and rebuilt, it will require considerable cost, while...
Proceedings Article
Research on the Application of Neural net in the Civil Engineering Semi-active Control
Xianglan Li, Li Guo
Earthquake poses serious hazard to human life and property security. Civil engineering structural vibration control especially the semi-active control can effectively reduce the earthquake damage to architecture. Neural network control has the ability of self-learning, adaptivity and parallel distributed...
Proceedings Article
An Intelligent Tutoring System Based on EGL
Xue Yan, Bo Song
With the development of Internet technology, intelligent tutoring system is the certain developing trend the human social digitized education. In this paper, aiming at the existing problems of intelligent tutoring system application architecture, in the analysis of the relationship between EGL and Web...
Proceedings Article
Research on the Collaborative Innovation Mechanism of the Automotive Industry Cluster Based on Original Collaboration
Xiujie Wang, Jian Liu
In this paper, based on the theory of industrial ecology, biological co evolution theory and automobile industry cluster innovation system characteristics, it is pointed out that automobile industry cluster innovation system is essentially an industrial ecosystem of mutual benefit and co-existence, co-evolution....
Proceedings Article
Design of Air Conditioning Remote Controller Based on Spontaneous EEG
Jinghai Yin, Yuhua Chen
This article describes the design of a device which can according to different users brain wave characteristics to choose the most suitable for the user to air temperature, but also can automatically adjust the wind speed reached users the most suitable to accept the degree of, all regulatory processes...
Proceedings Article
Design of Audio Player Based on Spontaneous EEG
Jinghai Yin, Yuhua Chen
This article describes the design of a device which can according to the characteristics of brain waves in different users to choose the most suitable for the user to enjoy music, but also can automatically adjust the volume up to the user the most suitable to accept the extent of, all regulatory processes...