Proceedings of the 2017 2nd International Conference on Materials Science, Machinery and Energy Engineering (MSMEE 2017)

Research of Tool Nose Radius in Ultrasonic Vibration Cutting for Difficult-to-cut Materials

Authors
Taoxian Huang, Min Xiao
Corresponding Author
Taoxian Huang
Available Online May 2017.
DOI
https://doi.org/10.2991/msmee-17.2017.89How to use a DOI?
Keywords
Ultrasonic vibration cutting, Regenerative chatter, Online monitoring technique, Tool life.
Abstract

Ultrasonic vibration cutting (UVC) as an advanced technique has been widely used in order to increase productivity and stabilities in machining of difficult-to-cut materials. The authors presented a chatter monitoring and signal processing system for turning a slender workpiece. A suitable tool nose radius prevents the tool fracturing occurrence so that the instability of the machining process is markedly reduced by applying UVC. When employing the novel machining method of online monitoring vibration signals and adjusting cutting parameters in real time, there is no occurrence of chatter and the machining accuracy is close to predicted amplitude of vibration during the whole cutting process. At the same time, the tool life improves to some extent.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2017 2nd International Conference on Materials Science, Machinery and Energy Engineering (MSMEE 2017)
Series
Advances in Engineering Research
Publication Date
May 2017
ISBN
978-94-6252-346-3
ISSN
2352-5401
DOI
https://doi.org/10.2991/msmee-17.2017.89How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Taoxian Huang
AU  - Min Xiao
PY  - 2017/05
DA  - 2017/05
TI  - Research of Tool Nose Radius in Ultrasonic Vibration Cutting for Difficult-to-cut Materials
BT  - Proceedings of the 2017 2nd International Conference on Materials Science, Machinery and Energy Engineering (MSMEE 2017)
PB  - Atlantis Press
SP  - 442
EP  - 445
SN  - 2352-5401
UR  - https://doi.org/10.2991/msmee-17.2017.89
DO  - https://doi.org/10.2991/msmee-17.2017.89
ID  - Huang2017/05
ER  -