Proceedings of the International Conference "Actual Issues of Mechanical Engineering" (AIME 2018)

Method of temperature measurement in cutting zone while turning using portable class thermal imaging system

Authors
I.V. Anukhin, S.A. Lyubomudrov, V.I. Anukhin, N.V. Nikitkov
Corresponding Author
I.V. Anukhin
Available Online April 2018.
DOI
10.2991/aime-18.2018.10How to use a DOI?
Keywords
thermal imager, temperature, thermogramm, cutter, metal chips, coefficient of thermal emissivity, turning lathe
Abstract

The article offers a method for temperature measurement in the cutting zone on a turning lathe. Application of thermal imager BALTECH TR-01500 allowed one to record the thermogramm of the cutter running out from the cutting zone at the moment of releasing the cutter face from chips. The values of the coefficients of thermal emissivity of the cutter and chips were recorded in the memory of the thermal imager. The article presents the conclusion of dependence of difference of mechanical characteristics of the machining material and the material of the cutter on heating temperature and the determination of the optimal temperature of cutting. There is a description of the method of temperature measurement and a photo of installation, also there is a frameby- frame thermogramm of the cutter running out from the cutting zone and temperature changing of the external surface of the chip and the cutter face. The calculation of error of measurement of temperature of the cutter face was presented

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Conference "Actual Issues of Mechanical Engineering" (AIME 2018)
Series
Advances in Engineering Research
Publication Date
April 2018
ISBN
978-94-6252-563-4
ISSN
2352-5401
DOI
10.2991/aime-18.2018.10How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - I.V. Anukhin
AU  - S.A. Lyubomudrov
AU  - V.I. Anukhin
AU  - N.V. Nikitkov
PY  - 2018/04
DA  - 2018/04
TI  - Method of temperature measurement in cutting zone while turning using portable class thermal imaging system
BT  - Proceedings of the International Conference "Actual Issues of Mechanical Engineering" (AIME 2018)
PB  - Atlantis Press
SP  - 51
EP  - 55
SN  - 2352-5401
UR  - https://doi.org/10.2991/aime-18.2018.10
DO  - 10.2991/aime-18.2018.10
ID  - Anukhin2018/04
ER  -