Proceedings of the International Conference "Actual Issues of Mechanical Engineering" (AIME 2018)

369 authors
Abdyukova, Rima Yavdatovna
Improving the design of poppet valve in piston mud pump
Afanasieva, Nadezda
Ultrasound Method of Li-ion Electric Battery Monitoring
Afanasyev, V.L.
Research of electrical power processes for optimum modeling and design of special electric drives
Akberov, Kamal Ch.
Simulation Design of Manufacturing Processes and Production Systems
Akhmetov, Rasul Tukhbatullovich
Range of application of the Brooks-Corey model for approximation of capillary curves in reservoirs of Western Siberia
Akhverdiev, Kamil Samedovich
Calculated model of wedge-shaped sliding supports in turbulent friction regime
Akimov, А.I.
Development of complex of mathematical models at production stages of multilayer structures of spherical shape by polymerization method
Akimov, I.A.
Development of complex of mathematical models at production stages of multilayer structures of spherical shape by polymerization method
Akulinin, Е.I.
Optimizing cycles of adsorption separation of gas mixtures
Alekseeva, Irina
Single-phase AC rectifier with high power factor
Alekseeva, Irina
Structural synthesis as method of zone-phase controller modernization
Alexeev, Gennady Valentinovich
Exergetic analysis of compressor characteristics using computer modeling
Alkneume, M.H.
CONVERGING OF ANALYTICAL SOLUTION OF PILE UNDER HORIZONTAL STATIC LOAD WITH ANALYSIS THROUTH FINITE ELEMENT METHOD
Almukhametova, Elvira Maratovna
Developing the technology of non-stationary treatment through the example of the deposit of Severnye Buzachi
Anciferov, Sergey Igorevich
Kinematic analysis of robotic complex within the SOLIDWORKS Motion system
Andreev, Leonid
Energy evaluation of production in agro-industrial complex
Andreev, Leonid
Theoretical substantiation of resource-saving system of recycle air clearing
Andronov, S. Yu.
Structural and mechanical properties of asphalt mixtures - basis for rationing of their technological properties
Anikin, Alexey S.
Statistical Model of Centimeter Range Signals That Have Passed The Surface and Space Propagation Path
Anikutin, Ivan Sergeevich
Development of information-analytical system for technological requests monitoring, taking into account regional specifics
Anukhin, I.V.
Method of temperature measurement in cutting zone while turning using portable class thermal imaging system
Anukhin, V.I.
Method of temperature measurement in cutting zone while turning using portable class thermal imaging system
Arslanov, I. G.
Performance analysis of surface reducing gear of rod driven screw pump with involute gearing and Novikov gearing
Arzhannikova, I.E.
Trend of Application of Automated Welding Process of Cold Metal Transfer in Structures Made of Aluminum Alloy
Asangaliev, E.A.
Development and research of aerodynamic stand
Atlasov, R.A.
Modeling of thermal interaction between buried pipeline and icy soils
Azarov, V.N.
Swirling devices intended for use in air ducts of dust emissions cleaning systems
Azarov, V.N.
ASSESSMENT OF EFFICIENCY OF ASBESTOSCEMENT DUST COLLECTION BY DUST COLLECTORS WITH COUNTERCURRENT SWIRLING FLOWS
Azarov, V.N.
Mathematical model of dust collection process in apparatus with counter-swirling flows in aspiration systems
Bakholdin, Dmitry
Determining parameters of electric power unit for light aircraft
Bandurin, Mikhail A.
Non-destructive testing application for diagnosis of long-running civil and industrial facilities under special climatic conditions
Bandurin, Mikhail A.
Use of finite-element simulation of primary deformations within walls of discharge tunnel to present anthropogenic disasters
Bartolomey, Maria
Influence of microdamage structure on fatigue resistance of metal functional material
Bartolomey, Maria
Comparative analysis of antifriсtion polymers behaviour under deformation of spherical bearing
Batin, Sergei
Influence of microdamage structure on fatigue resistance of metal functional material
Bazhanov, Anatoly Pavlovich
Structural diagrams and basic design relationships for the calculation of road safety indicators
Belov, A.V.
Technique of Engineering Structures Strength Analysis Taking into Account Damageability of Materials during Creep
Belov, A.V.
Calculation of gas absorption process considering thermal effects
Bessmertnaya, Yuliya Vyacheslavovna
Analysis of workpiece geometry change during isothermal free deformation of titanium alloys in square die
Bessmertnyi, Vasiliy Stepanovich
Plasma-chemical modification of concrete
Bestuzheva, Olga Vasilyevna
Accuracy estimation of mill pin machining with desk-side tools
Bezsonov, K. A.
Design Optimization of Machine Accessories through Analysis of their Elements Deformation in NX NASTRAN
Bikmukhametov, Anton Timurovich
Risk-oriented approach to problem of centrifugal pumps reliabilization during operation
Bikmukhametova, Marina Aleksandrovna
Risk-oriented approach to problem of centrifugal pumps reliabilization during operation
Biryukov, Valery
Determining parameters of electric power unit for light aircraft
Biryukov, Valeriy V.
INCREASE EFFICIENCY OF BRAKING ENERGY IN METRO
Blagin, A.V.
PROPERTIES OF NARROW-GAP SOLID SOLUTIONS OF NEAR INFRARED BAND OPTOELECTRONIC DEVICES
Boev, Evgeni Vladimirovich
Research of overall performance of polymeric sprinkler of coolers
Boeva, Nina Ivanovna
Research of overall performance of polymeric sprinkler of coolers
Bokadarov, Stanislav
Investigation of polymer interaction with nanoscale modifier and development of its identification algorithm
Bondarenko, Diana Olegovna
Plasma-chemical modification of concrete
Bondarenko, Nadezda Ivanovna
Plasma-chemical modification of concrete
Bondarenko, Julia Anatolievna
Space connection investigation of functionally dependent knots in rotating assemblies
Bondarenko, Julia Anatolievna
Accuracy estimation of mill pin machining with desk-side tools
Bondarev, Boris Aleksandrovich
Time-tested reliability of asphalt concretes on slag aggregates
Bondarev, Boris Aleksandrovich
Quantitative risk assessment of engineering slag asphalt mixes for urban highways
Borovkov, D.P.
Swirling devices intended for use in air ducts of dust emissions cleaning systems
Boyarkin, G N
Optimization of production process of manufacturing parts using simulation modeling of aperture
Boyarshinov, Dmitriy
Influence of microdamage structure on fatigue resistance of metal functional material
Boyko, Andrei Anatolievich
State and trends of depreciation strategy of rocket and space industry enterprises formation
Bridenko, Igor Iosifovich
Exergetic analysis of compressor characteristics using computer modeling
Brostilov, Sergey
Optimizing the Positioning of Power Sources in Industrial Units Electrical Power Systems on the Basis of the Method of Distributed Power Density
Brostilova, Tatyana
Optimizing the Positioning of Power Sources in Industrial Units Electrical Power Systems on the Basis of the Method of Distributed Power Density
Burkhanova, R.A.
ASSESSMENT OF EFFICIENCY OF ASBESTOSCEMENT DUST COLLECTION BY DUST COLLECTORS WITH COUNTERCURRENT SWIRLING FLOWS
Byshkin, Alexander Sergeevich
Development of information-analytical system for technological requests monitoring, taking into account regional specifics
Chernyakov, Mikhail K.
Simulation Design of Manufacturing Processes and Production Systems
Chernyakova, Maria M.
Simulation Design of Manufacturing Processes and Production Systems
Daminev, Rustem Rifovich
Research of overall performance of polymeric sprinkler of coolers
Daurenov, A.D
Development and research of aerodynamic stand
Davydov, Alexander Yurievich
Utilization of expert systems for screw pump sets with surface drive management
Davydov, Y.F.
Development and research of aerodynamic stand
Demidenko, I.S.
Adaptation of Inductive Energy Store on Diesel Railway Locomotive
Denisenko, Alexander
Influence of Position of Moving Parts of Lathe on Dynamic Characteristics
Derevyanko, Roman E.
Automation Control System against Driver Falling Asleep in Traffic
Dimitrienko, Yury I.
Development of Preprocessor of SIGMA Software for Computer Simulation in Aerospace Engineering
Dmitriev, Sergey
Subminiature eddy current transducers for studying aluminium-dielectric and steel-dielectric junctions
Drozdov, Alexander Nikolayevich
Production line intended for implementation of innovative technologies of cleaning and fractionation of raw coriander
Drozdov, V.V.
CONVERGING OF ANALYTICAL SOLUTION OF PILE UNDER HORIZONTAL STATIC LOAD WITH ANALYSIS THROUTH FINITE ELEMENT METHOD
Dudkin, M.V
Development and research of aerodynamic stand
Dudnik, Vitali
Ultrasound Method of Li-ion Electric Battery Monitoring
Dumanskij, S.I.
Technological process of high-speed heat treatment of corrosion-resistant 36NKhTYu alloy used in production of precision elastic elements
Dumanskij, I.O.
Technological process of high-speed heat treatment of corrosion-resistant 36NKhTYu alloy used in production of precision elastic elements
Dvoretsky, D.S.
Optimizing cycles of adsorption separation of gas mixtures
Dvoretsky, S.I.
Optimizing cycles of adsorption separation of gas mixtures
Dymov, Ilya S.
Automation Control System against Driver Falling Asleep in Traffic
Erulanova, A.E.
Development and research of aerodynamic stand
Fattakhov, Irik Galikhanovich
Technologies and technical devices for annual regulated flooding of a productive strata
Fedorenko, Mikhail Alexeyevich
Space connection investigation of functionally dependent knots in rotating assemblies
Feoktistov, A Y
Compute methods for assessment of gas distribution networks
Gabdrakhimov, Mavlitzyan Sagityanovich
Determining oscillating system dynamic parameters of a near-bit junk pulper
Gaibova, Tatiana
Oil refinery planning multi-projects under uncertainty
Gaitov, Bаgaudin Khamidovich
Heat emission coefficients of a combined oil separator
Gaitov, Bаgaudin Khamidovich
PROMISING ELECTROMECHANICAL AXIAL CONVERTERS
Galochkina, Nadezhda
Automatic control system for ion-exchange sorption in industrial production of amino acids as bioprotective factors
Galochkina, Nadezhda
Investigation of polymer interaction with nanoscale modifier and development of its identification algorithm
Gaponenko, Elena Vladimirovna
Kinematic analysis of robotic complex within the SOLIDWORKS Motion system
Gaponenko, Elena Vladimirovna
Optimization of the working area of modules for relative manipulation by the method of non-uniform covering
Gaponov, Vladimir
Ultrasound Method of Li-ion Electric Battery Monitoring
Gavrilenko, Maksim Dmitrievich
FUNDAMENTALS OF POSITIVE FEEDBACK WITH ADDITIONAL CONTROL
Ghias, Kharmanda
Reliability-based design algorithm for artificially replaced hip prosthesis considering material property uncertainty