Proceedings of the International Conference on Innovation in Science and Technology (ICIST 2020)

Effect of Carburizing Temperature and Size Schleichera Oleosa Carbonized Chorcoal on the Mechanical Properties of Low Carbon Steel

Authors
Agustinus Deka Betan*, Amiruddin Abdullah1w2a2f@gmail.com, Fransisco P. Nironfransisconiron@gmail.com, Abraham Adilabrahamadil56@gmail.com
State Polytechnic of Kupang, Padang, Indonesia
Corresponding Author
Agustinus Deka Betan
Available Online 30 November 2021.
DOI
10.2991/aer.k.211129.085How to use a DOI?
Keywords
carburizing; temperature; size schleichera oleosa; low carbon steel introduction
Abstract

Steel contain a considerable concentration of iron alloy and carbon when compared to other elements. Furthermore, carburzing process is used to improve mechanical properties of this metal through the addition of an activated carbon. This study used rough and smooth sizes of schleichera oleosa wood charcoal in the carburizing process to diffuse into low carbon steel surface. Furthermore, low carbon steel were heated in a furnace with temperature variations of 800°C, 850°C, 900°C and holding time of 60 and 90 minutes then submerged into a water medium to cool. The results of this process showed an increase in steel hardness using smooth charcoal with increased temperature and a roughness value of 551 HV. Meanwhile, rough charcoal size has a higher hardness value than smooth charcoal, but declines when heated up to 900°C. However, the highest hardness value for rough charcoal size is 682.6 HV.

Copyright
© 2021 The Authors. Published by Atlantis Press International B.V.
Open Access
This is an open access article under the CC BY-NC license.

Download article (PDF)

Volume Title
Proceedings of the International Conference on Innovation in Science and Technology (ICIST 2020)
Series
Advances in Engineering Research
Publication Date
30 November 2021
ISBN
10.2991/aer.k.211129.085
ISSN
2352-5401
DOI
10.2991/aer.k.211129.085How to use a DOI?
Copyright
© 2021 The Authors. Published by Atlantis Press International B.V.
Open Access
This is an open access article under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - Agustinus Deka Betan
AU  - Amiruddin Abdullah
AU  - Fransisco P. Niron
AU  - Abraham Adil
PY  - 2021
DA  - 2021/11/30
TI  - Effect of Carburizing Temperature and Size Schleichera Oleosa Carbonized Chorcoal on the Mechanical Properties of Low Carbon Steel
BT  - Proceedings of the International Conference on Innovation in Science and Technology (ICIST 2020)
PB  - Atlantis Press
SP  - 418
EP  - 421
SN  - 2352-5401
UR  - https://doi.org/10.2991/aer.k.211129.085
DO  - 10.2991/aer.k.211129.085
ID  - Betan2021
ER  -