Proceedings of the 2nd International Conference on Science, Technology, and Modern Society (ICSTMS 2020)

Numerical Analysis in Development of a Cross-Sectional Model of the “C” Profile Cold-Formed Steel SNI-1729:2015

Authors
Sugiharto, Gatot Santoso, Rachmad Hartono, Bukti Tarigan, Toto Supriyono, Asep Cardiman, Ibnu Malik Badriansyah
Corresponding Author
Sugiharto
Available Online 11 September 2021.
DOI
10.2991/assehr.k.210909.029How to use a DOI?
Keywords
cold-formed steel, sectional area, stiffness, SNI-1729:2015
Abstract

Lightweight structural steel profiles are often called cold-formed steel profiles-steels are formed by means of cold rolling of thin steel sheet so that the mass of steel profiles are extremely light. Because it has a thin plate thickness and mass of very light steel profile lateral stiffness is relatively low and is determined by the shape of the cross-section profile. This paper will discuss the development of a cross-sectional model of profile “C” size of 70 mm in the cold-forming steel SNI 1729:2015 is done numerically with the help of software. The analysis was carried out on the cross-sectional shape of the SNI 1729:2015 standard and the results of the development of the cross-sectional shape. The analysis was conducted by reviewing the deflection that occurs in the lateral direction on rod dimensions and the same type of loading. Results of the analysis show that in the cross-sectional shape of the development results there is a decrease in the lateral deflection, this shows that there is an increase in the lateral stiffness of the lightweight steel structure profile after the development of the cross-sectional model.

Copyright
© 2021, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2nd International Conference on Science, Technology, and Modern Society (ICSTMS 2020)
Series
Advances in Social Science, Education and Humanities Research
Publication Date
11 September 2021
ISBN
10.2991/assehr.k.210909.029
ISSN
2352-5398
DOI
10.2991/assehr.k.210909.029How to use a DOI?
Copyright
© 2021, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Sugiharto
AU  - Gatot Santoso
AU  - Rachmad Hartono
AU  - Bukti Tarigan
AU  - Toto Supriyono
AU  - Asep Cardiman
AU  - Ibnu Malik Badriansyah
PY  - 2021
DA  - 2021/09/11
TI  - Numerical Analysis in Development of a Cross-Sectional Model of the “C” Profile Cold-Formed Steel SNI-1729:2015
BT  - Proceedings of the 2nd International Conference on Science, Technology, and Modern Society (ICSTMS 2020)
PB  - Atlantis Press
SP  - 123
EP  - 126
SN  - 2352-5398
UR  - https://doi.org/10.2991/assehr.k.210909.029
DO  - 10.2991/assehr.k.210909.029
ID  - 2021
ER  -