Proceedings of the 6th Mechanical Engineering, Science and Technology International conference (MEST 2022)

A Preliminary Study: Utilization Red Brick Powder as Filler in Asphalt Mixture

Authors
Muhammad Abdurrohim1, *, Senja Rum Harnaeni1, Sri Sunarjono1
1Master of Civil Engineering, Faculty of Engineering, Universitas Muhammadiyah Surakarta, Surakarta, Indonesia
*Corresponding author. Email: s100210033@student.ums.ac.id
Corresponding Author
Muhammad Abdurrohim
Available Online 19 April 2023.
DOI
10.2991/978-94-6463-134-0_8How to use a DOI?
Keywords
Red Brick Powder; Filler; Asphalt Mixture; HRS-WC First Section
Abstract

Filler has the smallest percentage of asphalt pavement’s aggregate gradation but has a significant role. In addition, mineral filler stone dust, is very difficult to obtain. Therefore, there is a need to make an innovation by substituting filler with other materials, such as red brick powder. This study will discuss red brick powder as a filler substitution in the Hot Rolled Sheet – Wearing Course (HRS–WC) asphalt mixture. Variation of filler content used 0%, 25%, 50%, 75%, and 100% with optimum asphalt content of 6.75%. Furthermore, the Marshall test was carried out on all test objects to determine their characteristic values. The results showed that using red brick powder filler with a content of 75% obtained the optimum increase in stability aspects, equal to 61.29 kg. The value of flow and Void Filled With Asphalt (VFWA) will increase with the addition of filler content. While the Marshall Quotient, Void In Mix (VIM), and Void In Mineral Aggregate (VMA) values occur on the contrary, namely will decrease with the addition of filler content but still meet the specifications required by the Bina Marga 2018 Highways General Specification. This analysis shows that red brick powder can be used as a filler in the HRS asphalt mixture. – WC and need to be tried on a porous asphalt mixture that can drain water well and is suitable for application in tropical countries such as Indonesia.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the 6th Mechanical Engineering, Science and Technology International conference (MEST 2022)
Series
Advances in Engineering Research
Publication Date
19 April 2023
ISBN
10.2991/978-94-6463-134-0_8
ISSN
2352-5401
DOI
10.2991/978-94-6463-134-0_8How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Muhammad Abdurrohim
AU  - Senja Rum Harnaeni
AU  - Sri Sunarjono
PY  - 2023
DA  - 2023/04/19
TI  - A Preliminary Study: Utilization Red Brick Powder as Filler in Asphalt Mixture
BT  - Proceedings of the 6th Mechanical Engineering, Science and Technology International conference (MEST 2022)
PB  - Atlantis Press
SP  - 73
EP  - 87
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-134-0_8
DO  - 10.2991/978-94-6463-134-0_8
ID  - Abdurrohim2023
ER  -