Proceedings of the 6th Mechanical Engineering, Science and Technology International conference (MEST 2022)
234 authors
- Abdurrohim, Muhammad
- A Preliminary Study: Utilization Red Brick Powder as Filler in Asphalt Mixture
- Adesta, Erry Y. Y.
- Design and Fabrication of Fused Deposition Modelling 3D Printer for Early-Age Students Using Quality Function Deployment Method
- Adytama, Febry
- Effect of Fiber Immersion Time on Alkaline Treatment to the Mechanical Strength of the Composite Reinforced Oil Palm Empty Fruit Bunches (OPEFB) Fibers
- Alaloul, Wesam Salah
- Risk-Based Inspection in Offshore Structures: A Systematic Approach
- Alam, Fajar
- Geotourism Potential Study Based on Environmental Sustainability in Berambai, Samarinda City, East Kalimantan
- Alfarisi, Muhammad Rizqy
- Service Quality Analysis on Tracking System and Management of Bus Passenger Study at PT Indo Trans Teknologi
- Amin, Muh
- Fabrication of Porous Ceramic Composite Clay-Zeolite Membranes via Replica Template Technique
- Ananda, Medtha Utari
- Preparation and Characterization of Adsorbent from Oil Palm Empty Fruit Bunches Activated with KOH
- Anggono, Agus Dwi
- Peer-Review Statements
- Annisa A, Diva
- Risk-Based Evaluation for the Financial Model of Trans Sumatra Toll Road Infrastructure Development Project
- Ardhiyanti, Agustina Indra
- Polysulphone (PSf)-Titanium Dioxide (TiO₂) Membranes for Iron (Fe) Removal
- Ardi, Gilang
- Risk Factors and Value of Risk Factors on Toll Road Investment Project in Indonesia
- Ardi, Gilang
- Risk-Based Evaluation for the Financial Model of Trans Sumatra Toll Road Infrastructure Development Project
- Ardiansyah, Isal
- Microstructural Characterization and Mechanical Properties of Austempered Ductile Iron at Different Austempering Temperatures
- Arianta
- Risk-Based Inspection in Offshore Structures: A Systematic Approach
- Arief, Rudi Kurniawan
- Turbine Blade Modification to Obtain Required NPHR Value with Low-Quality Coal Energy Source at Gorontalo Power Plant
- Arief, Rudi Kurniawan
- Failure Analysis of Drive Motor Bracket on Mini CNC Machine Using Finite Element Analysis Software
- Arief, Rudi Kurniawan
- Design and Fabrication of Fused Deposition Modelling 3D Printer for Early-Age Students Using Quality Function Deployment Method
- Armila
- Turbine Blade Modification to Obtain Required NPHR Value with Low-Quality Coal Energy Source at Gorontalo Power Plant
- Arsyad, Muhammad
- Spinner Machine for Walasoji Shredded Fish: Designing and Manufacturing
- Asrofi, Mochamad
- Flexural Strength Optimization as Effect of Infill Pattern Variation in FDM 3D Printing of Multi-layers ABS-PLA
- Atmoko, Nugroho Tri
- Performance of Thermoelectric Generator in the Combustion of Wood Charcoal with Various Fan Powers
- Bahlawan, Zuhriyan Ash Shiddieqy
- Production of Liquid Soap from Castor Oil and VCO with the Addition of Sorghum Tannins and Lemongrass Essential Oil as Anti-Bacterial Ingredients
- Binyamin
- Numerical Investigation of Polymer Exchange Membrane Fuel Cell with Thermal Contact Resistance and Porous Medium Thickness Effect on Temperature Distribution and Performance
- Binyamin
- Performance Improvement of Proton Exchange Membrane Fuel Cells Through Numerical Investigation of a Tapered Flow Field Configuration
- Budiyati, Eni
- Polysulphone (PSf)-Titanium Dioxide (TiO₂) Membranes for Iron (Fe) Removal
- Cahyaningtyas, Prisilia Rahayu
- Implementation of Clustering Analysis on Solar Panels Adoption by MSMEs in Banyumas Regency
- Darmawan, Angga
- Road Damage Handling During Covid – 19 Pandemic Using DAU (General Allocation Fund) (Case Study of Kabupaten Karanganyar)
- Darmawan, Arif
- Investigation of Slagging Fouling Aspect of Palm Fiber and Palm Leaves Waste in Drop Tube Furnace
- Darsin, Mahros
- Flexural Strength Optimization as Effect of Infill Pattern Variation in FDM 3D Printing of Multi-layers ABS-PLA
- Deza, Alya Khairunnisa
- Identification of OSH Stakeholder Engagement Management Strategy at XYZ University Area Based on the Results of Mapping for Each Quadrant
- Dwiantoro, Bambang Arip
- Analysis of the Characteristics of Palm Oil Trunk Waste as Co-firing Fuel for Power Plant
- Effendi, M. Khoirul
- Multi-objective Optimization of Turning Process Steel SKD 11 Using BPNN-Artificial Bee Colony (ABC) Method
- Effendi, Mohammad Khoirul
- Multi-objective Optimization of AISI 1045 on Drilling Process Based on Hybrid BPNN and Firefly Algorithm
- Effendi, Mohammad Khoirul
- Multi-objective Optimization Using BPNN-PSO in the Face Milling Process of AISI 1045
- Fajardini, Ridhani Anita
- Multi-objective Optimization of Turning Process Steel SKD 11 Using BPNN-Artificial Bee Colony (ABC) Method
- Fajardini, Ridhani Anita
- Multi-objective Optimization of AISI 1045 on Drilling Process Based on Hybrid BPNN and Firefly Algorithm
- Fajardini, Ridhani Anita
- Multi-objective Optimization Using BPNN-PSO in the Face Milling Process of AISI 1045
- Fajrul, Rahmat
- Flexural Strength Optimization as Effect of Infill Pattern Variation in FDM 3D Printing of Multi-layers ABS-PLA
- Fanila, Nur
- Synthesis of Diethanolamide Surfactant from Palm Oil by Esterification and Amidation Processes
- Febiyani, Anastasia
- Implementation of Clustering Analysis on Solar Panels Adoption by MSMEs in Banyumas Regency
- Febrianto, Christo
- Risk Factors and Value of Risk Factors on Toll Road Investment Project in Indonesia
- Fitri, Meldia
- Design and Fabrication of Fused Deposition Modelling 3D Printer for Early-Age Students Using Quality Function Deployment Method
- Fransiscus, Hanky
- Development of Collapsible Motorcycle Helmet for Motorcycle Users in Indonesia
- Fuadi, Ahmad
- The Effect of Activator Concentration and Urea Doping on the Characteristics of Shrimp Waste Charcoal-Based Activated Carbon as a Supercapacitor Electrode
- Furqon, Maulana
- Study on Selection of Turbine Design and Sizing of Transmission Cable for Development of Pico HydroPower Plant at Dewi Bukit Mangggung Tourism Place Tanjungsiang, Subang, West Java
- Gusriyaldi
- Utilization of Silica Sand and Gravel from Indarung Limestone Waste as Aggregate Substances for Rigid Pavement
- Hafiza, Jana
- Turbine Blade Modification to Obtain Required NPHR Value with Low-Quality Coal Energy Source at Gorontalo Power Plant
- Hafiza, Jana
- Design and Fabrication of Fused Deposition Modelling 3D Printer for Early-Age Students Using Quality Function Deployment Method
- Hanifa, Fanni Husnul
- Service Quality Analysis on Tracking System and Management of Bus Passenger Study at PT Indo Trans Teknologi
- Hanifah, Umi
- Study on Selection of Turbine Design and Sizing of Transmission Cable for Development of Pico HydroPower Plant at Dewi Bukit Mangggung Tourism Place Tanjungsiang, Subang, West Java
- Hapsari, Gita Indah
- Service Quality Analysis on Tracking System and Management of Bus Passenger Study at PT Indo Trans Teknologi
- Hariana
- Analysis of the Characteristics of Palm Oil Trunk Waste as Co-firing Fuel for Power Plant
- Hariana
- Investigation of Slagging Fouling Aspect of Palm Fiber and Palm Leaves Waste in Drop Tube Furnace
- Hariani, D. I.
- Seismic Fragility Evaluation of Power Line Using Incremental Dynamic Analysis Method
- Harismah, Kun
- Preparation and Characterization of Adsorbent from Oil Palm Empty Fruit Bunches Activated with KOH
- Hariyadi
- Turbine Blade Modification to Obtain Required NPHR Value with Low-Quality Coal Energy Source at Gorontalo Power Plant
- Harnaeni, Senja Rum
- A Preliminary Study: Utilization Red Brick Powder as Filler in Asphalt Mixture
- Harnaeni, Senja Rum
- Road Damage Handling During Covid – 19 Pandemic Using DAU (General Allocation Fund) (Case Study of Kabupaten Karanganyar)
- Hartati, Wahyuni
- Geotourism Potential Study Based on Environmental Sustainability in Berambai, Samarinda City, East Kalimantan
- Hassan, Nik Normunira Mat
- Waste Cooking Oils in Biodegradable Polymer Conversion Process
- Hasyim
- Spinner Machine for Walasoji Shredded Fish: Designing and Manufacturing
- Hermana, Gita Novian
- Study on Thermal Behaviour of Tungsten Cemented Carbide Tip Scraps
- Hidayah, Malikhatul
- Synthesis of Polyamide-Al₂O₃ Nanocomposite Membranes Using the Nanofiltration Phase Separation Method
- Hidayat, Dadang Dayat
- Study on Selection of Turbine Design and Sizing of Transmission Cable for Development of Pico HydroPower Plant at Dewi Bukit Mangggung Tourism Place Tanjungsiang, Subang, West Java
- Hidayati, Nur
- Synthesis of Polyamide-Al₂O₃ Nanocomposite Membranes Using the Nanofiltration Phase Separation Method
- Hidayati, Nurul
- Comparison of Road Improvement and Maintenance Costs Before and During the Covid-19 Pandemic (Case Study in Karanganyar Regency, Central Java)
- Hilmy, Irfan
- Design and Fabrication of Fused Deposition Modelling 3D Printer for Early-Age Students Using Quality Function Deployment Method
- Ibrahim, Siti Aida
- Waste Cooking Oils in Biodegradable Polymer Conversion Process
- Idris, Zihardi
- Comparison of Road Improvement and Maintenance Costs Before and During the Covid-19 Pandemic (Case Study in Karanganyar Regency, Central Java)
- Idris, Zilhardi
- Road Damage Handling During Covid – 19 Pandemic Using DAU (General Allocation Fund) (Case Study of Kabupaten Karanganyar)
- Ikhsan, Muhammad
- Utilization of Silica Sand and Gravel from Indarung Limestone Waste as Aggregate Substances for Rigid Pavement
- Ikhwan, Nur
- CFD Simulation to Study Effect of Bubble Size in Dissolved Oxygen Increase During Aeration Process
- Iqbal, Tsulis
- Peer-Review Statements
- Ismunandar, Wisnu
- Geotourism Potential Study Based on Environmental Sustainability in Berambai, Samarinda City, East Kalimantan
- Istofa
- A Systematic Literature Review of TinyML for Environmental Radiation Monitoring System
- Ivan WCS, I Made
- Flexural Strength Optimization as Effect of Infill Pattern Variation in FDM 3D Printing of Multi-layers ABS-PLA
- Junyansyah, Hendy
- Culture-Based Motor Vehicle Exhaust Cover Modification Using Reverse Engineering Methods Combined with Rapid Prototyping
- Khuzaimah, Siti
- The Effect of Activator Concentration and Urea Doping on the Characteristics of Shrimp Waste Charcoal-Based Activated Carbon as a Supercapacitor Electrode
- Kultsum, Ummi
- Peer-Review Statements
- Kurniawan, Aris Pujud
- Service Quality Analysis on Tracking System and Management of Bus Passenger Study at PT Indo Trans Teknologi
- Kuswa, Fairuz Milkiy
- Investigation of Slagging Fouling Aspect of Palm Fiber and Palm Leaves Waste in Drop Tube Furnace
- Latief, Yusuf
- Identification of OSH Stakeholder Engagement Management Strategy at XYZ University Area Based on the Results of Mapping for Each Quadrant
- Latief, Yusuf
- Estimate Activity Duration with Resource Capacity Approach in Project Production Phase, Case Study: Pump Packaging Production System
- Latief, Yusuf
- Risk Factors and Value of Risk Factors on Toll Road Investment Project in Indonesia
- Latief, Yusuf
- Development of Risk-Based Audit Method Standard for Stadium Project Using Design and Build Contract to Minimize Dispute: Owner’s Perspective
- Latief, Yusuf
- Risk-Based Evaluation for the Financial Model of Trans Sumatra Toll Road Infrastructure Development Project
- Latifah, Sri Mulyati
- Influence of Tempering Time on the Microstructure, Hardness and Impact Toughness of Ductile Cast Iron
- Latipah, Asslia Johar
- Effect of Fiber Immersion Time on Alkaline Treatment to the Mechanical Strength of the Composite Reinforced Oil Palm Empty Fruit Bunches (OPEFB) Fibers
- Leni, Desmarita
- Failure Analysis of Drive Motor Bracket on Mini CNC Machine Using Finite Element Analysis Software
- Lim, Ocktaeck
- Numerical Investigation of Polymer Exchange Membrane Fuel Cell with Thermal Contact Resistance and Porous Medium Thickness Effect on Temperature Distribution and Performance
- Lim, Ocktaeck
- Performance Improvement of Proton Exchange Membrane Fuel Cells Through Numerical Investigation of a Tapered Flow Field Configuration
- Lim, Ocktaeck
- Combustion and Performance Characteristics of the Spark Discharge Energy Effect on Rapid Compression and Expansion Machine (RCEM) Working with Propane and Diesel Fuel Direct Injection as Marine Fuel
- Lubis, A. M. H. S.
- Design and Fabrication of Portable Block on Ring Tribometer and Its Application to Evaluate Wear of SS-201 Steel
- Lubis, Abdul Munir Hidayat Syah
- Static Stress Analysis of Merah Putih EV Bus Chassis by Finite Element Modelling
- Lubis, Abdul Munir Hidayat Syah
- Analysis of the Effect of TBHQ and BHT Additives on Oxidation of Castor Oil
- Lubis, Abdul Munir Hidayat Syah
- Analysis of the Effect of ZDPP and MODTC Additives to Wear Protection of Castor Oil
- Luthfi, M.
- Failure Analysis of Drive Motor Bracket on Mini CNC Machine Using Finite Element Analysis Software
- Mahmoud, Nouraldeen A. A.
- Mitigation and Improvement of Distorted Distribution System by Hybrid Passive Filter
- Majid, Haris M.
- Design and Fabrication of Portable Block on Ring Tribometer and Its Application to Evaluate Wear of SS-201 Steel