Proceedings of the International Conference on Aviamechanical Engineering and Transport (AviaENT 2019)

253 authors
Akulov, P.А.
Automated Measurement of Engaging and Separating Forces of Electrical Connector Contact
Alekseenko, Evgenia
Emergency Modes Modeling in Non-Traction Consumers Power Supply Systems
Alhusseini, S.
Using Automated Fare Collection System Data to Determine Transport Demand
Andriyanov, N.A.
Development of Network Training Complexes Using Fuzzy Models and Noise-Resistant Coding
Artyunin, A.I.
Simulation of the Automatic Balancing Process of A Rotor, Rigidly Fixed in the Housing on Elastic Supports
Astakhov, Nikolay
Data Transfer Problems at the Host-Computer Level and Methods to Improve the Performance of Computations on Heterogeneous Systems
Astakhov, Nikolay
Design of direct digital synthesizers signal generator
Badmayev, Munko-Jargal
Development of Low-Cost Unmanned Aerogeophysical System Based on Light VTOL Aircraft
Balaev, E.Yu.
The Effect of Ultrasonic Treatment on the Adhesion of a Surface Composition Made of SME Materials at Various Stages of Its Formation
Bashkirov, Alexey
Data Transfer Problems at the Host-Computer Level and Methods to Improve the Performance of Computations on Heterogeneous Systems
Bashkirov, Alexey
Design of direct digital synthesizers signal generator
Bazhanov, A.P.
The Concept of Functional Road Condition Management
Biryukov, D.S.
Mathematical Modelling of the Power Regulator by the Example of an A11VO Axial Piston Pump (Bosch Rexroth)
Blednova, Zh.M.
The Effect of Ultrasonic Treatment on the Adhesion of a Surface Composition Made of SME Materials at Various Stages of Its Formation
Bludov, V.V.
Modeling the Distribution of Temperatures on the Surface of a Heat Exchanger
Bobarika, Igor
Trends of Development in the Use of Modified Oil Fractions in Aviation
Bochektueva, Elena
Experimental Study of the Stability of Layered Composite Plates
Bogidaev, S.A.
Simplified Viscoelastic Plastic Model of Ore Particle Movement Along the Vibration Organ
Bokhoeva, Lyubov
Experimental Study of the Stability of Layered Composite Plates
Bolshakov, R.S.
The Approach to Automating the Control of the Vibrational Field of a Technological Machine
Borbac, N.M.
Refined Method of Analyzing Potential Defects in Engineering Products
Borisova, M.Z.
Study of the Structure of Wear-Resistant Coatings Obtained under Different Technological Modes of the Arc Metallization
Borodulina, S.A.
The Competitiveness Factor in Transport Work Forecasting for the Regional Transportation Market
Borodulina, S.A.
Transport and Logistics Systems Development Based on the Transport Modes Comparative Advantages
Bulatov, Yuri
Emergency Modes Modeling in Non-Traction Consumers Power Supply Systems
Buslaeva, I.I.
Operability of MAN F2000 Trucks in the North
Butuzova, A.
Methods of Aggregated Vehicle Ownership Cost Estimation
Butuzova, Alexsandra
Principles for Determining Special Trip Generators
Buyakova, N.V.
Modeling of Electromagnetic Fields Created by Traction Networks in Emergency Modes
Bychenin, A.P.
Determining a Rational Composition of Diesel Mixture in Terms of Antiwear Characteristics
Chebakova, E.O.
Influence of Technical and Operational Indicators on the Results of Planning Motor Transport Operation
Chebakova, E.O.
Transport and Logistics Systems Development Based on the Transport Modes Comparative Advantages
Cherepanov, Aleksandr
Non Sinusoidal Modes of Traction Power Supply Systems Equipped with Reactive Power Compensation
Cherkasov, Аleksandr
Dual Row Rotary Piston Hydraulic Machine with Two Pumping Units
Cherkasov, Аleksandr
Simulation of the Process of Heat Treatment of Vermiculite Concentrates in Power Process Units with a Mechanical Base
Chupakov, M.V.
Mathematical Model of Intelligent Decision Support System of UAV Operator
Daniliuk, Vladislav
Feasibility Study of Ultrasonic De-Icing Technique for Aircraft Wing Ice Protection
Daniliuk, Aleksey
Feasibility Study of Ultrasonic De-Icing Technique for Aircraft Wing Ice Protection
Delakhova, A.
Formation of an Effective Model of Transport Corridor in the Territory of the Republic of Sakha
Demchuk, V.A.
Specifics of Aircraft Operation and Possibilities for Improvement in Forecasting Used for Meteorological Support of Flights in the Arctic
Denisov, D. S.
The Analysis of Wear Metals in Oils
Denisov, G.A.
Application of the System Engineering Method when Researching the Carat Pedestrian
Dinh, Si Mai
Study of Phase Transformations in Parts Made From Titanium Alloy VT22 During Pendulum Grinding
Dolgih, E.S.
Investigation of the Effectiveness of Oscillation Control in a Three-Mass System Based on the Additional Feedbacks
Doshlov, Oleg
Trends of Development in the Use of Modified Oil Fractions in Aviation
Doshlov, Ivan
Trends of Development in the Use of Modified Oil Fractions in Aviation
Drokov, V.G.
Monte-Carlo Simulation of the Filtration Processes of Metallic Discrete Impurity in Oil System of Gas-Turbine Aircraft Engines
Drokov, V.Vl.
Monte-Carlo Simulation of the Filtration Processes of Metallic Discrete Impurity in Oil System of Gas-Turbine Aircraft Engines
Duong, V.L.
Mathematical Modeling of Composite and Inhomogeneous Deformable Materials Based on Scanning and Finite Element Method
Dyadya, Sergey
Features of Peripheral End milling: Formation of Machined Surface Profile
Egorova, T.
Formation of an Effective Model of Transport Corridor in the Territory of the Republic of Sakha
Eltoshkina, Evgenia
Mathematical Modeling of the Differential Dynamics of the Galvanic Process of Restoring the Seats of the Main Supports of Autotractor Engines
Evtushenko, E.V.
Mathematical Model of Intelligent Decision Support System of UAV Operator
Fadeev, A.
Using Automated Fare Collection System Data to Determine Transport Demand
Fedonin, O.N.
Automated Control of Technological Parameters of Ceramic Tiles Using Technical Vision
Fedonin, O.N.
Automated Measurement of Engaging and Separating Forces of Electrical Connector Contact
Fedorov, V. P.
Process Control of Forming the Surface Quality Parameters of Parts According to a Desired Law by Methods of Surface Plastic Deformation
Fedotov, A.I.
Influence of Headlight Contamination on the Stopping Distance and Maximum Allowable Speed on Roads Covered with Chemical Anti-Icing Materials
Fedukov, Alexander
Technological Quality Assurance of Assembling Machine Components Based on Modular Elements, Taking into Account the Contact Stiffness of the Joints
Filippov, V.N.
Modeling of the Dynamics of a Carriage Taking into Account the Geometric Nonlinearity of Displacements and Deformation
Galyautdinov, I.I.
Calculation Methods of Investments Economic Efficiency in New Equipment
Galyautdinov, I.I.
Optimization Models for Making Infrastructure Investments for Coal Mines
Gavrilin, Alexey
Dual Row Rotary Piston Hydraulic Machine with Two Pumping Units
Gavrilin, Alexey
Simulation of the Process of Heat Treatment of Vermiculite Concentrates in Power Process Units with a Mechanical Base
Gergenov, S.M.
Influence of Headlight Contamination on the Stopping Distance and Maximum Allowable Speed on Roads Covered with Chemical Anti-Icing Materials
Germashev, Anton
Features of Peripheral End milling: Formation of Machined Surface Profile
Gladkih, A.M.
Calculation Methods of Investments Economic Efficiency in New Equipment
Gladkih, A.M.
Optimization Models for Making Infrastructure Investments for Coal Mines
Gladkikh, A. A.
Development of Network Training Complexes Using Fuzzy Models and Noise-Resistant Coding
Glotov, Vadim
Data Transfer Problems at the Host-Computer Level and Methods to Improve the Performance of Computations on Heterogeneous Systems
Glotov, Vadim
Design of direct digital synthesizers signal generator
Glotova, Tatyana
Data Transfer Problems at the Host-Computer Level and Methods to Improve the Performance of Computations on Heterogeneous Systems
Glotova, Tatyana
Design of direct digital synthesizers signal generator
Glushkov, S.V.
Improving the Organization of Traffic in the Framework of the Development of Integrated Schemes for the Organization of Traffic for Small Cities (by the Example of Isilkul)
Govorkov, A.S.
Modeling the Distribution of Temperatures on the Surface of a Heat Exchanger
Govorkov, A.S.
Technology of Aerodynamic Separation of Industrial Room
Gozbenko, V.E.
The Modeling of Mechanical Engineering Facilities to Reduce the Impact of External Vibration Effects
Gozbenko, V.E.
The Vertical Dynamics of the Car, Taking into Account the Irregularity of the Track Gauge
Gozbenko, V.E.
Analysis of the Dynamic Condition and Forms of the Principal Oscillations of the Car
Gozbenko, V.E.
Structure Formation Processes During the Plasma Cementation of Steel and the Subsequent Heat Treatment
Grechneva, Mariya
Repairing Crumpling and Wear Defects of Rails in the Zone of Electrocontact Welded Joints by Electric Arc Surfacing
Greshilov, A. D.
Surface Processing Technology in Improving Operational Properties of Hot-Work Tool Steel
Gromalova, V.O.
Influence of Headlight Contamination on the Stopping Distance and Maximum Allowable Speed on Roads Covered with Chemical Anti-Icing Materials
Guseva, E.A.
Structure Formation Processes During the Plasma Cementation of Steel and the Subsequent Heat Treatment
Handozhko, V.A.
Automated Control of Technological Parameters of Ceramic Tiles Using Technical Vision
Handozhko, V.А.
Automated Measurement of Engaging and Separating Forces of Electrical Connector Contact
Hodunaev, A.Y.
Monte-Carlo Simulation of the Filtration Processes of Metallic Discrete Impurity in Oil System of Gas-Turbine Aircraft Engines
Iatsenko, S.
Methods of Aggregated Vehicle Ownership Cost Estimation
Ilyin, Petr
Mathematical Modeling of the Differential Dynamics of the Galvanic Process of Restoring the Seats of the Main Supports of Autotractor Engines
Iov, I.A.
Investigation of the Effectiveness of Oscillation Control in a Three-Mass System Based on the Additional Feedbacks
Ivanov, D.A.
Increase in the Durability of the Tool, Utilized in Aviation Machine Building and with the Reconditioning of the Air Vessels
Ivashin, S.
Cascade Method for Technical Preparation of Production in Digital Technology Application
Izmerov, M.A.
Fractal Model of Elastoplastic Contact of Nominally Flat Rough Surfaces
Kalyadina, Anastasia
Data Transfer Problems at the Host-Computer Level and Methods to Improve the Performance of Computations on Heterogeneous Systems
Kapitonova, T.A.
Safety of Railway Transport Facilities Operating in Extreme Climatic Conditions
Kargapol'tsev, S.K.
The Modeling of Mechanical Engineering Facilities to Reduce the Impact of External Vibration Effects
Kargapol'tsev, S.K.
The Vertical Dynamics of the Car, Taking into Account the Irregularity of the Track Gauge
Kargapol'tsev, S.K.
Analysis of the Dynamic Condition and Forms of the Principal Oscillations of the Car
Kargapoltsev, S.K.
Structure Formation Processes During the Plasma Cementation of Steel and the Subsequent Heat Treatment
Karlina, Yu.I.
The Modeling of Mechanical Engineering Facilities to Reduce the Impact of External Vibration Effects