Proceedings of the International Conference on Aviamechanical Engineering and Transport (AviaENT 2019) - Authors

Series:Advances in Engineering Research

Proceedings of the International Conference on Aviamechanical Engineering and Transport (AviaENT 2019)

253 authors

Akulov, P.А.: Automated Measurement of Engaging and Separating Forces of Electrical Connector Contact
Alekseenko, Evgenia: Emergency Modes Modeling in Non-Traction Consumers Power Supply Systems
Alhusseini, S.: Using Automated Fare Collection System Data to Determine Transport Demand
Andriyanov, N.A.: Development of Network Training Complexes Using Fuzzy Models and Noise-Resistant Coding
Artyunin, A.I.: Simulation of the Automatic Balancing Process of A Rotor, Rigidly Fixed in the Housing on Elastic Supports
Astakhov, Nikolay: Data Transfer Problems at the Host-Computer Level and Methods to Improve the Performance of Computations on Heterogeneous Systems
Astakhov, Nikolay: Design of direct digital synthesizers signal generator
Badmayev, Munko-Jargal: Development of Low-Cost Unmanned Aerogeophysical System Based on Light VTOL Aircraft
Balaev, E.Yu.: The Effect of Ultrasonic Treatment on the Adhesion of a Surface Composition Made of SME Materials at Various Stages of Its Formation
Bashkirov, Alexey: Data Transfer Problems at the Host-Computer Level and Methods to Improve the Performance of Computations on Heterogeneous Systems
Bashkirov, Alexey: Design of direct digital synthesizers signal generator
Bazhanov, A.P.: The Concept of Functional Road Condition Management
Biryukov, D.S.: Mathematical Modelling of the Power Regulator by the Example of an A11VO Axial Piston Pump (Bosch Rexroth)
Blednova, Zh.M.: The Effect of Ultrasonic Treatment on the Adhesion of a Surface Composition Made of SME Materials at Various Stages of Its Formation
Bludov, V.V.: Modeling the Distribution of Temperatures on the Surface of a Heat Exchanger
Bobarika, Igor: Trends of Development in the Use of Modified Oil Fractions in Aviation
Bochektueva, Elena: Experimental Study of the Stability of Layered Composite Plates
Bogidaev, S.A.: Simplified Viscoelastic Plastic Model of Ore Particle Movement Along the Vibration Organ
Bokhoeva, Lyubov: Experimental Study of the Stability of Layered Composite Plates
Bolshakov, R.S.: The Approach to Automating the Control of the Vibrational Field of a Technological Machine
Borbac, N.M.: Refined Method of Analyzing Potential Defects in Engineering Products
Borisova, M.Z.: Study of the Structure of Wear-Resistant Coatings Obtained under Different Technological Modes of the Arc Metallization
Borodulina, S.A.: The Competitiveness Factor in Transport Work Forecasting for the Regional Transportation Market
Borodulina, S.A.: Transport and Logistics Systems Development Based on the Transport Modes Comparative Advantages
Bulatov, Yuri: Emergency Modes Modeling in Non-Traction Consumers Power Supply Systems
Buslaeva, I.I.: Operability of MAN F2000 Trucks in the North
Butuzova, A.: Methods of Aggregated Vehicle Ownership Cost Estimation
Butuzova, Alexsandra: Principles for Determining Special Trip Generators
Buyakova, N.V.: Modeling of Electromagnetic Fields Created by Traction Networks in Emergency Modes
Bychenin, A.P.: Determining a Rational Composition of Diesel Mixture in Terms of Antiwear Characteristics
Chebakova, E.O.: Influence of Technical and Operational Indicators on the Results of Planning Motor Transport Operation
Chebakova, E.O.: Transport and Logistics Systems Development Based on the Transport Modes Comparative Advantages
Cherepanov, Aleksandr: Non Sinusoidal Modes of Traction Power Supply Systems Equipped with Reactive Power Compensation
Cherkasov, Аleksandr: Dual Row Rotary Piston Hydraulic Machine with Two Pumping Units
Cherkasov, Аleksandr: Simulation of the Process of Heat Treatment of Vermiculite Concentrates in Power Process Units with a Mechanical Base
Chupakov, M.V.: Mathematical Model of Intelligent Decision Support System of UAV Operator
Daniliuk, Aleksey: Feasibility Study of Ultrasonic De-Icing Technique for Aircraft Wing Ice Protection
Daniliuk, Vladislav: Feasibility Study of Ultrasonic De-Icing Technique for Aircraft Wing Ice Protection
Delakhova, A.: Formation of an Effective Model of Transport Corridor in the Territory of the Republic of Sakha
Demchuk, V.A.: Specifics of Aircraft Operation and Possibilities for Improvement in Forecasting Used for Meteorological Support of Flights in the Arctic
Denisov, D. S.: The Analysis of Wear Metals in Oils
Denisov, G.A.: Application of the System Engineering Method when Researching the Carat Pedestrian
Dinh, Si Mai: Study of Phase Transformations in Parts Made From Titanium Alloy VT22 During Pendulum Grinding
Dolgih, E.S.: Investigation of the Effectiveness of Oscillation Control in a Three-Mass System Based on the Additional Feedbacks
Doshlov, Ivan: Trends of Development in the Use of Modified Oil Fractions in Aviation
Doshlov, Oleg: Trends of Development in the Use of Modified Oil Fractions in Aviation
Drokov, V.G.: Monte-Carlo Simulation of the Filtration Processes of Metallic Discrete Impurity in Oil System of Gas-Turbine Aircraft Engines
Drokov, V.Vl.: Monte-Carlo Simulation of the Filtration Processes of Metallic Discrete Impurity in Oil System of Gas-Turbine Aircraft Engines
Duong, V.L.: Mathematical Modeling of Composite and Inhomogeneous Deformable Materials Based on Scanning and Finite Element Method
Dyadya, Sergey: Features of Peripheral End milling: Formation of Machined Surface Profile
Egorova, T.: Formation of an Effective Model of Transport Corridor in the Territory of the Republic of Sakha
Eltoshkina, Evgenia: Mathematical Modeling of the Differential Dynamics of the Galvanic Process of Restoring the Seats of the Main Supports of Autotractor Engines
Evtushenko, E.V.: Mathematical Model of Intelligent Decision Support System of UAV Operator
Fadeev, A.: Using Automated Fare Collection System Data to Determine Transport Demand
Fedonin, O.N.: Automated Control of Technological Parameters of Ceramic Tiles Using Technical Vision
Fedonin, O.N.: Automated Measurement of Engaging and Separating Forces of Electrical Connector Contact
Fedorov, V. P.: Process Control of Forming the Surface Quality Parameters of Parts According to a Desired Law by Methods of Surface Plastic Deformation
Fedotov, A.I.: Influence of Headlight Contamination on the Stopping Distance and Maximum Allowable Speed on Roads Covered with Chemical Anti-Icing Materials
Fedukov, Alexander: Technological Quality Assurance of Assembling Machine Components Based on Modular Elements, Taking into Account the Contact Stiffness of the Joints
Filippov, V.N.: Modeling of the Dynamics of a Carriage Taking into Account the Geometric Nonlinearity of Displacements and Deformation
Galyautdinov, I.I.: Calculation Methods of Investments Economic Efficiency in New Equipment
Galyautdinov, I.I.: Optimization Models for Making Infrastructure Investments for Coal Mines
Gavrilin, Alexey: Dual Row Rotary Piston Hydraulic Machine with Two Pumping Units
Gavrilin, Alexey: Simulation of the Process of Heat Treatment of Vermiculite Concentrates in Power Process Units with a Mechanical Base
Gergenov, S.M.: Influence of Headlight Contamination on the Stopping Distance and Maximum Allowable Speed on Roads Covered with Chemical Anti-Icing Materials
Germashev, Anton: Features of Peripheral End milling: Formation of Machined Surface Profile
Gladkih, A.M.: Calculation Methods of Investments Economic Efficiency in New Equipment
Gladkih, A.M.: Optimization Models for Making Infrastructure Investments for Coal Mines
Gladkikh, A. A.: Development of Network Training Complexes Using Fuzzy Models and Noise-Resistant Coding
Glotov, Vadim: Data Transfer Problems at the Host-Computer Level and Methods to Improve the Performance of Computations on Heterogeneous Systems
Glotov, Vadim: Design of direct digital synthesizers signal generator
Glotova, Tatyana: Data Transfer Problems at the Host-Computer Level and Methods to Improve the Performance of Computations on Heterogeneous Systems
Glotova, Tatyana: Design of direct digital synthesizers signal generator
Glushkov, S.V.: Improving the Organization of Traffic in the Framework of the Development of Integrated Schemes for the Organization of Traffic for Small Cities (by the Example of Isilkul)
Govorkov, A.S.: Modeling the Distribution of Temperatures on the Surface of a Heat Exchanger
Govorkov, A.S.: Technology of Aerodynamic Separation of Industrial Room
Gozbenko, V.E.: The Modeling of Mechanical Engineering Facilities to Reduce the Impact of External Vibration Effects
Gozbenko, V.E.: The Vertical Dynamics of the Car, Taking into Account the Irregularity of the Track Gauge
Gozbenko, V.E.: Analysis of the Dynamic Condition and Forms of the Principal Oscillations of the Car
Gozbenko, V.E.: Structure Formation Processes During the Plasma Cementation of Steel and the Subsequent Heat Treatment
Grechneva, Mariya: Repairing Crumpling and Wear Defects of Rails in the Zone of Electrocontact Welded Joints by Electric Arc Surfacing
Greshilov, A. D.: Surface Processing Technology in Improving Operational Properties of Hot-Work Tool Steel
Gromalova, V.O.: Influence of Headlight Contamination on the Stopping Distance and Maximum Allowable Speed on Roads Covered with Chemical Anti-Icing Materials
Guseva, E.A.: Structure Formation Processes During the Plasma Cementation of Steel and the Subsequent Heat Treatment
Handozhko, V.A.: Automated Control of Technological Parameters of Ceramic Tiles Using Technical Vision
Handozhko, V.А.: Automated Measurement of Engaging and Separating Forces of Electrical Connector Contact
Hodunaev, A.Y.: Monte-Carlo Simulation of the Filtration Processes of Metallic Discrete Impurity in Oil System of Gas-Turbine Aircraft Engines
Iatsenko, S.: Methods of Aggregated Vehicle Ownership Cost Estimation
Ilyin, Petr: Mathematical Modeling of the Differential Dynamics of the Galvanic Process of Restoring the Seats of the Main Supports of Autotractor Engines
Iov, I.A.: Investigation of the Effectiveness of Oscillation Control in a Three-Mass System Based on the Additional Feedbacks
Ivanov, D.A.: Increase in the Durability of the Tool, Utilized in Aviation Machine Building and with the Reconditioning of the Air Vessels
Ivashin, S.: Cascade Method for Technical Preparation of Production in Digital Technology Application
Izmerov, M.A.: Fractal Model of Elastoplastic Contact of Nominally Flat Rough Surfaces
Kalyadina, Anastasia: Data Transfer Problems at the Host-Computer Level and Methods to Improve the Performance of Computations on Heterogeneous Systems
Kapitonova, T.A.: Safety of Railway Transport Facilities Operating in Extreme Climatic Conditions
Kargapol'tsev, S.K.: The Modeling of Mechanical Engineering Facilities to Reduce the Impact of External Vibration Effects
Kargapol'tsev, S.K.: The Vertical Dynamics of the Car, Taking into Account the Irregularity of the Track Gauge
Kargapol'tsev, S.K.: Analysis of the Dynamic Condition and Forms of the Principal Oscillations of the Car
Kargapoltsev, S.K.: Structure Formation Processes During the Plasma Cementation of Steel and the Subsequent Heat Treatment
Karlina, A.I.: The Modeling of Mechanical Engineering Facilities to Reduce the Impact of External Vibration Effects