Proceedings of the 8th International Conference on Applied Engineering (ICAE 2025)
132 authors
- Adhiguna
- Smart Solar-Powered Aquaponics System for Sustainable Food Production
- Adicita, Yosef
- Comparative Design Analysis of Dry-Cell vs Wet-Cell HHO (Brown’s Gas) Generators
- Ahmed, Alhassan Tawfiq
- Design and Fabrication of a Machine for Converting Plastic Bottles into 3D Printing Filaments
- Airlangga, Muhammad Naufal
- Optimizing System Stability and Performance in PCB-Based RFID Reader
- Al Islam, Axl Sidiq
- Study of Strength Simulation of Excavator Boom Stand Using Solidworks
- Al-Khowarizmi
- Transfer Learning-Based Classification of Oil Palm Bunch Maturity from Digital Image Data
- Alfalaah, Rovio Thariq
- Development of Mapping and Localization System for A Three Wheel Omniwheel Robot using Odometry and G-Mapping
- Alfayed, Achmad
- Implementation of Particle Swarm Optimization (PSO) Based Path Planning Algorithm on Omniwheel Three-Wheel Service Robot
- Aliman, Masdika
- Improved Navigation of Wheeled Soccer Robots Using Artificial Potential Field with Escape Force
- Ananda, Fitri Elvira
- Study of LHCP Polarization Method in 5G Communication MIMO Antenna Configuration
- Andryani, Nur Afny Catur
- Optimizing Weld Defect Detection Enhancement in Non-Uniform Illumination Environments
- Anurogo, Wenang
- Inventory of Potential Land Suitability for Settlement on Rempang Island Using Spatial Multi Criteria (SMC) Method
- Ardi, Noper
- Web-Based Ground Control Station for Real-Time Monitoring Quadcopter UAVs
- Arifin, Muhammad
- Optimizing System Stability and Performance in PCB-Based RFID Reader
- Arifin, Nurul Laili
- Comparative Design Analysis of Dry-Cell vs Wet-Cell HHO (Brown’s Gas) Generators
- Ariyanto, Nugroho Pratomo
- Comparative Design Analysis of Dry-Cell vs Wet-Cell HHO (Brown’s Gas) Generators
- Armah, Stephen Kofi
- Design and Fabrication of a Machine for Converting Plastic Bottles into 3D Printing Filaments
- Asaad, Nur Sakinah
- Optimizing System Stability and Performance in PCB-Based RFID Reader
- Batubara, Ninda Hardina
- Effect of Infill Patterns on Tensile Strength and Production Efficiency in PETG 3D Printing
- Br Sembiring, Evaliata
- Usability Evaluation of Workforce Planning System Using the System Usability Scale (SUS)
- Budiana
- Optimizing System Stability and Performance in PCB-Based RFID Reader
- Budiarto, Widodo
- Optimizing Weld Defect Detection Enhancement in Non-Uniform Illumination Environments
- Chowanda, Andry
- Optimizing Weld Defect Detection Enhancement in Non-Uniform Illumination Environments
- Delimayanti, Mera Kartika
- Advancing Learning Through GenAI: Alarming Ethical Implementation in Higher Education
- Devano, Alrido Martha
- Governance Analysis of the IBOSS Information System in Supporting Goods Traffic Using the COBIT 2019 Framework
- Dewi, Ifti Luthviana
- The Impact of Monthly Subcontractor Performance Evaluation on the Construction Process of a 26-Meter Tugboat
- Dezalna, Putri
- PCB Defect Detector: Deep Learning to Detect Component Installation Errors in PCB Production
- During, Tegar Adhi Nugraha Christ
- Analysis of the Structural Strength of the Barelang63 Wheeled Robot Goalkeeper Frame For Ball Impact and Robot Load Using Finite Element Analysis (FEA)
- Dwijotomo, Abdurahman
- Peer-Review Statements
- Erwina, Tasya
- Enhancing Consumer Purchasing Pattern Prediction on E-Commerce Platforms Using Random Forest Algorithm: A Simulation Approach
- Fachrizal, Ferry
- Transfer Learning-Based Classification of Oil Palm Bunch Maturity from Digital Image Data
- Fadilah, Nurul
- Study of Strength Simulation of Excavator Boom Stand Using Solidworks
- Fahruzi, Iman
- PCB Defect Detector: Deep Learning to Detect Component Installation Errors in PCB Production
- Failasuf, Banu
- Usability Evaluation of Workforce Planning System Using the System Usability Scale (SUS)
- Faiz, Muhammad Naufal Abdurrahman
- X-Ray Image Classification Using Support Vector Machine Based on Histogram of Oriented Gradients and Local Binary Patterns Feature Extraction
- Fajrin, Aulia
- The Impact of Monthly Subcontractor Performance Evaluation on the Construction Process of a 26-Meter Tugboat
- Fauzi, Mochamad Rizal
- Improved Navigation of Wheeled Soccer Robots Using Artificial Potential Field with Escape Force
- Frendiana, Viving
- Study of LHCP Polarization Method in 5G Communication MIMO Antenna Configuration
- Gledys, Elizabeth
- Spatial Modelling and Development of the Food Security and Vulnerability Atlas (FSVA) in Batam City Using Geographic Information System (GIS)
- Hanif, Zaki Naufal
- Generating Retopology for 3D Character Models in the Animated Short Film ‘GENERATE’
- Harahap, Nursaima
- Optimizing 3D Low-Poly Asset Production Standards for Village Meow 2.5D Game Using GDLC with Expert Review
- Haris, Rajabul
- Facial Expression Classification on Student Data Using KAN and MLP: Comparative Study and Ensemble Strategy
- Hendriansyah, M. Rafif
- Governance Analysis of the IBOSS Information System in Supporting Goods Traffic Using the COBIT 2019 Framework
- Hestiawan, Hendri
- Finite Element Analysis of Thermal and Structural Behavior in Food Packaging Machinery Using ANSYS
- Hi, Hafidz Dwiky
- Study of Strength Simulation of Excavator Boom Stand Using Solidworks
- Idan, Mahmoud Fadhel
- The Role of Artificial Intelligence in Advancing Mechanical Engineering: Opportunities, Challenges, and Emerging Applications in Applied Mechanics
- Indrawinata, Kevin
- Improved Navigation of Wheeled Soccer Robots Using Artificial Potential Field with Escape Force
- Irawan, Sudra
- Spatial Modeling and Hotspot Analysis of CO, PM10, and PM2.5 on Batam Island Using Geographic Information Systems (GIS)
- Irawan, Sudra
- Spatial Modelling and Development of the Food Security and Vulnerability Atlas (FSVA) in Batam City Using Geographic Information System (GIS)
- Iskandar
- Development of Control and Monitoring System for Energy in Off-Grid Mini Solar Power Plants
- Istardi, Didi
- Peer-Review Statements
- Istardi, Didi
- Development of Control and Monitoring System for Energy in Off-Grid Mini Solar Power Plants
- Istardi, Didi
- Smart Solar-Powered Aquaponics System for Sustainable Food Production
- Istardi, Didi
- Design and Simulation of a Three-Phase Grid-Connected Fast-Charging System for NIMH EV Batteries Using a CC-CV Protocol
- Jamzuri, Eko Rudiawan
- Development of Mapping and Localization System for A Three Wheel Omniwheel Robot using Odometry and G-Mapping
- Jamzuri, Eko Rudiawan
- Implementation of Particle Swarm Optimization (PSO) Based Path Planning Algorithm on Omniwheel Three-Wheel Service Robot
- Kristanti, Natalia
- Inventory of Potential Land Suitability for Settlement on Rempang Island Using Spatial Multi Criteria (SMC) Method
- Kurniawan, Dwi Ely
- Enhancing Consumer Purchasing Pattern Prediction on E-Commerce Platforms Using Random Forest Algorithm: A Simulation Approach
- Kurniawan, Rahmat
- Optimizing System Stability and Performance in PCB-Based RFID Reader
- Kurniawan, Robi
- Design and Simulation of a Three-Phase Grid-Connected Fast-Charging System for NIMH EV Batteries Using a CC-CV Protocol
- Kusumadewi, Lusia Puspita
- Semi-Automatic Tilt Detection on PCBA Against Front Cap
- Leksonowati, Nur Fitria Pujo
- Effect of Infill Patterns on Tensile Strength and Production Efficiency in PETG 3D Printing
- Liliana, Dewi Yanti
- Advancing Learning Through GenAI: Alarming Ethical Implementation in Higher Education
- Lubis, Arif Ridho
- Transfer Learning-Based Classification of Oil Palm Bunch Maturity from Digital Image Data
- Lubis, Eka Mutia
- Optimizing System Stability and Performance in PCB-Based RFID Reader
- Lumombo, Liony
- Optimizing 3D Low-Poly Asset Production Standards for Village Meow 2.5D Game Using GDLC with Expert Review
- Mahadi, Aisyah Beningsari
- Optimizing 3D Low-Poly Asset Production Standards for Village Meow 2.5D Game Using GDLC with Expert Review
- Manurung, Meilani Mandhalena
- Effect of Infill Patterns on Tensile Strength and Production Efficiency in PETG 3D Printing
- Maulidiah, Hana Mutialif
- Optimizing System Stability and Performance in PCB-Based RFID Reader
- Meidiansyah, Muhammad Roby
- Study of LHCP Polarization Method in 5G Communication MIMO Antenna Configuration
- Muchlis, Fauziah
- Usability Evaluation of Workforce Planning System Using the System Usability Scale (SUS)
- Mufida, Miratul Khusna
- Usability Evaluation of Workforce Planning System Using the System Usability Scale (SUS)
- Musthofa, Afif Nuril
- Design and Simulation of a Three-Phase Grid-Connected Fast-Charging System for NIMH EV Batteries Using a CC-CV Protocol
- Mutiarani
- Effect of Infill Patterns on Tensile Strength and Production Efficiency in PETG 3D Printing
- Nakul, Fitriyanti
- Optimizing System Stability and Performance in PCB-Based RFID Reader
- Nasrullah, Muchamad Fajri Amirul
- Facial Expression Classification on Student Data Using KAN and MLP: Comparative Study and Ensemble Strategy
- Ningsih, Tiwi Gustria
- Peer-Review Statements
- Ningsih, Tiwi Gustria
- The Impact of Monthly Subcontractor Performance Evaluation on the Construction Process of a 26-Meter Tugboat
- Nuramal, Agus
- Finite Element Analysis of Thermal and Structural Behavior in Food Packaging Machinery Using ANSYS
- Pamungkas, Nurman
- Effect of Infill Patterns on Tensile Strength and Production Efficiency in PETG 3D Printing
- Perkasa, Veryawan Nanda
- Computational Fluid Dynamics Analysis of Marine Propeller Hydrodynamic Performance: A Systematic Investigation Across Extended Operational Envelopes
- Pernando, Yonky
- Optimizing Weld Defect Detection Enhancement in Non-Uniform Illumination Environments
- Prasetyo, Naufal Abdurrahman
- The Impact of Monthly Subcontractor Performance Evaluation on the Construction Process of a 26-Meter Tugboat
- Pratama, S. Rahmad Rozak
- PCB Defect Detector: Deep Learning to Detect Component Installation Errors in PCB Production
- Prebianto, Nanta Fakih
- Development of a Bluetooth Based Automatic Nitrogen Valve Control System for Enhancing Nitrogen Efficiency in SMT Reflow Oven Processes: A Case Study at PT XYZ
- Purba, Adi Syahputra
- Effect of Infill Patterns on Tensile Strength and Production Efficiency in PETG 3D Printing
- Puspita, Roza
- Comparative Design Analysis of Dry-Cell vs Wet-Cell HHO (Brown’s Gas) Generators
- Puspita, Widya Rika
- Optimizing System Stability and Performance in PCB-Based RFID Reader
- Putra, Rama Dani Eka
- Finite Element Analysis of Thermal and Structural Behavior in Food Packaging Machinery Using ANSYS
- Putra, Reza Pratama
- Study of LHCP Polarization Method in 5G Communication MIMO Antenna Configuration
- Rabbani, Rizqiena Mulya
- Implementating Mobile-Based Vehicle Carbon Footprint and Transportation Emission Calculation System to Enhance Users Environmental Awareness
- Rahmi, Anis
- Optimizing 3D Low-Poly Asset Production Standards for Village Meow 2.5D Game Using GDLC with Expert Review
- Razali, Said M.
- Web-Based Ground Control Station for Real-Time Monitoring Quadcopter UAVs
- Ribfli, Muhammad
- Analysis of the Structural Strength of the Barelang63 Wheeled Robot Goalkeeper Frame For Ball Impact and Robot Load Using Finite Element Analysis (FEA)
- Risandriya, Sumantri Kurniawan
- Development of a Bluetooth Based Automatic Nitrogen Valve Control System for Enhancing Nitrogen Efficiency in SMT Reflow Oven Processes: A Case Study at PT XYZ
- Riyadi, Agung
- Peer-Review Statements
- Rosafira, Jihan Zeinyuta
- Design and Simulation of a Three-Phase Grid-Connected Fast-Charging System for NIMH EV Batteries Using a CC-CV Protocol
- Salsabila, Salwa
- Study of LHCP Polarization Method in 5G Communication MIMO Antenna Configuration
- Sani, Abdullah
- A Deep Learning System for PCB Trace Defect Detection: Implementation and Evaluation
- Sani, Abdullah
- Semi-Automatic Tilt Detection on PCBA Against Front Cap