The Design and Manufacturing of Machine Tapered Shaft Measuring Tool

DOI

10.2991/aer.k.211129.031How to use a DOI?

Keywords

taper; precision; measurement; practice; dial indicator

Abstract

Machine tapered shaft is a shaft with a difference between left and right diameter, and any difference of diameter will cause the formation of taper. To limit the number of tapering that occurs, many taper standards such as ISO, Morse Taper, and others are created. As an example, a workpiece of Morse Taper 03 standard has a taper angle of 1.47778 degree. Until now there is no measuring instrument that could measure the precision taper angle directly. To fill this unavailability is need to design an equipment to measure precision tapered shaft easily that requires only a set of dial indicator unit in 0,001 mm accuracy and the block which designed to shift along the guide way. The results of the measurement tests carried out are able to measure with a deviation of only 0.003 mm for a measurement length of 250 mm, or just 0 degree 0 minute 2.5 second. Overall, the objective of this research can be achieved by realization a set of tapered precision workpiece measuring equipment quite simple and easy to operate because it only use the indicator dial and its seat block which has been modified for the needs of precision tapered workpiece measurement.

Copyright

© 2021 The Authors. Published by Atlantis Press International B.V.

Open Access

This is an open access article under the CC BY-NC license.

Download article (PDF)

TY  - CONF
AU  - Aryo Satito
AU  - Hariyanto
AU  - Supandi
AU  - Stefanus Santosa
PY  - 2021
DA  - 2021/11/30
TI  - The Design and Manufacturing of Machine Tapered Shaft Measuring Tool
BT  - Proceedings of the International Conference on Innovation in Science and Technology (ICIST 2020)
PB  - Atlantis Press
SP  - 134
EP  - 138
SN  - 2352-5401
UR  - https://doi.org/10.2991/aer.k.211129.031
DO  - 10.2991/aer.k.211129.031
ID  - Satito2021
ER  -