Proceedings of the 2015 4th International Conference on Sensors, Measurement and Intelligent Materials
759 authors
- Jin, Zhexiong
- Rule of Proportion in Active Ingredient and Rapid Determination multi-components in Polygonum Perfoliatum L.
- Jing, Jiaying
- Experimental study on wave dissipation coefficient for tetrahedron penetrating frames breakwater
- Jing, Xiaofei
- Research on Super-high Dumping Sliding Failure Mechanism under Earthquake
- Kang, Liujiang
- Modelling the Track Allocation Problem in Railway Stations
- Kang, Shi-Zhao
- Preparation of GeS2/graphene nanocomposite with high lithium storage capacity
- Ke, Guojun
- The Analysis and Application of BIM Technology in Design of Steel Structure Joints
- Ke, Xiaojun
- Calculation on Bond Strength of High-Strength Concrete Filled Steel Tube
- Kong, Feng
- MSG Wastewater Treatment with UASB-AOMBR Coupling process
- Li, Chenggang
- Effect of Laser Rapid Sintering on the Electrical Properties of Sr- and Mg-doped LaGaO3
- Li, Chenggang
- Correlations between the Oxygen Ionic Conductivity of Sr- and Mg-doped LaGaO3 and Its Crystal Structure
- Li, Chun-Xiang
- A Design of Microstrip Array Antenna for ETC Applications
- Li, Danmei
- A Staff Access Control System Based on RFID Technology
- Li, Decai
- Effects of rotational speed and blade profile on mass flow at exhaust port in roots compressor
- Li, Fengmei
- The design of breeding district soil information wireless acquisition system
- Li, Fengyi
- Research on Filling Mining with Fly Ash-based Cement Materials
- Li, Guodong
- Nitrogen Doped Titania Plates with Dominant {001} Facets: The Effect of Surface Fluorination on Visible-Light Photocatalytic Activity
- Li, Hanhao
- Identification and Estimation for Autonomous Vehicle Movement Target Based on The Soanr
- Li, Hongjun
- Improving the rate capability of spinel LiNi0.5Mn1.5O4 through substitution of Co for Ni element
- Li, Hucheng
- The method of low power consumption sediment transport for the environmental dredging
- Li, Jia-Lin
- Ocean Fishing Fleet Scheduling Path Optimization Model Research Based On Improved Ant Colony Algorithm
- Li, Jiahe
- An Air-ground Robotic Cooperative System for Explosive Disposal
- Li, Jian
- The experimental study of foaming system which suitable for high temperature foam gas driving
- Li, Jianmin
- A Case Study of Asphalt Pavement Overlay for Beinjing West Chang’an Avenue Using Modified Bitumen of High Viscosity and Elasticity
- Li, Jie
- Numerical Research in Wall Mass Transfer Characteristics of the Straight Pipe under Fully Developed Turbulent Flow
- Li, Jin
- Heat Insulation Performance Analysis on the Vacuum Insulation Composite Compartment of Refrigerated Trucks
- Li, Junzhi
- Research on State Collisions of Authenticated Cipher ACORN
- Li, Kang
- Springback Simulation in Air Bending of Titanium Alloy Sheet Using Solid Shell Element
- Li, Kanglong
- The Analysis and Application of BIM Technology in Design of Steel Structure Joints
- Li, Kewen
- Modeling on Health Status of Cable lines
- Li, Lan
- Compactly supported biorthogonal two-direction vector-valued wavelet Packet with arbitrary dilation
- Li, Lanshu
- Biodegradation of Oil Shale by Phanerochaete chrysosporium
- Li, Li
- Analysis on the Effects of Grass Coverage on the Runoff-Sediment Relationship
- Li, Liang
- Oxidation Behavior of Continues SiC Fibers in Static Air
- Li, Linze
- Experimental Study on Frost Resistance of High Titanium Heavy Slag Concrete
- Li, Longbin
- Testing Research of Hematite Concrete Beam Under Impact Loading
- Li, Rui
- A Design of Microstrip Array Antenna for ETC Applications
- Li, Shan
- Modeling on Health Status of Cable lines
- Li, Shuang
- Synthesis of Tin Oxide Anchored on Graphene Sheets and its Performance Lithium Storage
- Li, Wanmin
- Study on the Activity of Calcium Silicate Slag
- Li, Wei
- Design of Monitoring Platform of Hydraulic Support Operation Pressure Based on ARM and CAN Bus
- Li, Wenjiang
- Experimental researches on wind flows severely interfered by sea waves
- Li, Wenyong
- SSL Protocol Analysis Based on Freshness Identifiers
- Li, Wenyu
- Research on the Characteristics of CaCO3 Crystallization Fouling on Enhanced Heat Transfer Tubes
- Li, Xiang
- ensitivity Analyses and Value Qualification of CO2 Storage in the Fractured Saline Aquifer
- Li, Xiangqing
- Preparation of GeS2/graphene nanocomposite with high lithium storage capacity
- Li, Xin
- Study on Harmonic Suppression and Hybrid Series Active Power Filter
- Li, Xin
- Study of radio energy transmission system based on magnetic coupling resonance
- Li, Xuan
- Research on Internal Static Accessibility Evaluation of Urban Rail Transit Network
- Li, Yan
- Study on solar tracking trajectory calculation method with Lagrange interpolation
- Li, Yang
- The study of dynamic change of enzymatic activities in Chrysanthemum field with different coating material
- Li, Yanming
- Clinical Study of 200 Cases of Absorbable Hemostatic Gauze in Breast Cancer Surgery
- Li, Yapeng
- Identification and Estimation for Autonomous Vehicle Movement Target Based on The Soanr
- Li, Yawen
- Study on a compression algorithm of surveillance video based on Fourier-Mellin transformation
- Li, Yongli
- Analysis on the Effects of Grass Coverage on the Runoff-Sediment Relationship
- Li, Yuanchun
- Configuration Optimization Method of Reconfigurable Manipulator based on Dijkstra Algorithm
- Li, Yuanchun
- Study on solar tracking trajectory calculation method with Lagrange interpolation
- Li, Yuhong
- Study on the Properties of the organosilicon-acrylic resin/LDHs nanocomposite
- Li, Zhengyang
- The Design Method of Modal Test Supporting System
- Li, Zhengyang
- Response Analysis of Fixed-frequency Vibration Endurance Test on A Certain Airplane Oil Pressure Reservoir
- Liang, Jingjing
- Numerical Analysis of Inducing Airflow Characteristics on the Airfoil Model Based Coanda Effect
- Liang, Qing-Guo
- Building of information system frame for metrology testers
- Liang, Xu
- Research on 3D-Model Reconstruction and Coordinate-Picking Technology Based on CsGL
- Liao, Jianjun
- Application and Development at Home of Geographical Information System in Forestry Resource
- Lin, Chen
- Dynamic Time-History Analysis of Steel frame-Composite Steel Plate Shear Wall Structures
- Lin, Chen
- Nonlinear Finite Element Simulation of Steel Frames-Composite Steel Shear Wall
- Lin, Feng
- A 3D Process Design Method based on MBD Machining Element
- Lin, Feng
- One kind of headlamp tester unaffected by the detection distance
- Lin, Haixin
- Study on Comprehensive Evaluation Method for Track Irregularity Based on HSMM
- Lin, Yongda
- Research Residuals Weaken Multibeam Bathymetric Data Based on Curve Fitting and Wavelet Transform
- Liu, Caihui
- Research on 3D-Model Reconstruction and Coordinate-Picking Technology Based on CsGL
- Liu, Changlei
- Hydrothermal synthesis and performance of Co doped lithiated vanadium oxides as cathode material for lithium ion batteries
- Liu, Chengfang
- Springback Simulation in Air Bending of Titanium Alloy Sheet Using Solid Shell Element
- Liu, Chengjiang
- A Load Balancing Aware Virtual Machine Live Migration Algorithm
- Liu, Chenwei
- ensitivity Analyses and Value Qualification of CO2 Storage in the Fractured Saline Aquifer
- Liu, Chun-Jian
- Honing Process of Hydraulic Cylinder Bore for Remanufacturing
- Liu, Dongsheng
- Study on Structural Reliability Analysis of Aircraft Electronic Equipment
- Liu, Guoqiang
- Improving the rate capability of spinel LiNi0.5Mn1.5O4 through substitution of Co for Ni element
- Liu, Hai-Ming
- The study of dynamic change of enzymatic activities in Chrysanthemum field with different coating material
- Liu, Hesheng
- Effects of the Process Conditions on the formation of the Gas Layer in the Plastic Profile Gas-assisted Co-extrusion Processes
- Liu, Jingxing
- Fingerprint Image Denoising Via the Improved Total Variation (TV) Algorithm
- Liu, Jun
- Wet hydrogen peroxide oxidation of synthetic pharmaceutical wastewater as a pretreatment method
- Liu, Junmei
- Effect of Bioactive Peptides from the Oviductus Ranae of Rana Temporaria Chensinensis on Immune Function in Mice
- Liu, Junrong
- Differential Power Analysis Attacks Based on the Multiple Correlation Coefficient
- Liu, Kehui
- Research on Super-high Dumping Sliding Failure Mechanism under Earthquake
- Liu, Keping
- Configuration Optimization Method of Reconfigurable Manipulator based on Dijkstra Algorithm
- Liu, Kun
- Improving the rate capability of spinel LiNi0.5Mn1.5O4 through substitution of Co for Ni element
- Liu, Lei
- A 3D Process Design Method based on MBD Machining Element
- Liu, Liang
- Multi-resolution Modeling In Application Of Power Supply System Compatibility On More Electric Aircraft
- Liu, Lilai
- Synthesis of Tin Oxide Anchored on Graphene Sheets and its Performance Lithium Storage
- Liu, Lu
- Dynamic corrosion of refractories by Na2CO3
- Liu, Minchao
- Dairy manure biochar modified with sodium hydroxide and its effect on lead removal in aqueous solution
- Liu, Runqing
- Influence of Sodium Nitrite on the Early Strength of Cement-Fly Ash Composite Cementitious Material
- Liu, Shaohua
- Development and Design of Lithology Identification System based on Java
- Liu, Shaohua
- The Lithology Discrimination with Back-Propagation Neural Network Method
- Liu, Siyuan
- Aspect-Oriented Programming for Guided Testing
- Liu, Tianfang
- An Air-ground Robotic Cooperative System for Explosive Disposal
- Liu, Wei
- Modelling the Track Allocation Problem in Railway Stations
- Liu, Xiangzhe
- Syntheses and Performance of layered LiNixCo1-2xMnxO2 as Cathode Materials for Lithium-Ion Batteries
- Liu, Xinyu
- Configuration Optimization Method of Reconfigurable Manipulator based on Dijkstra Algorithm
- Liu, Yanmei
- Sweater online customization system based on mobile terminal