Proceedings of the 2015 International Conference on Structural, Mechanical and Material Engineering
185 authors
- Alonso Guzman, E.M.
- Recycled concrete, a solution for fine and coarse raw material for new concrete
- Alonso Guzman, E.M.
- Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
- Alonso Guzman, E.M.
- Analysis of Carbonation in Mortars made with Solid Waste as a Substitute for Cement
- Bai, Jie
- Finite-element mode for parametric Analysis of wood frame shear walls
- Bao, Xuewen
- A study of construction management of seismic isolation retrofit
- Bedolla Arroyo, J.A.
- Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
- Betsofen, S. Ya.
- Improvement of Commercial Mg–Al–Zn–Mn Alloys by Rolling
- Bozhko, S.A.
- Improvement of Commercial Mg–Al–Zn–Mn Alloys by Rolling
- Cai, Huxiang
- Research and application of harmonic drive in mechanical system
- Cai, ShaoBiao
- Interfacial Adhesion due to Liquid Mediated Contact of Hydrophilic Solid Surfaces
- Cha, Giwook
- A Study on Asbestos Slate Buildings in Rural Areas of Korea
- Cha, Giwook
- A Study on Estimation of Demolition Waste Generation Index by using CART (Classification and Regression Tree) Analysis
- Chang, Shuiping
- Comparison of Two Extraction Methods for Spirogyra Extracellular Polymeric Substances
- Chang, Shuiping
- The Changes of Polysaccharides in Extracellular Polymeric Substance for Cladophora glomerata under Different Salinity
- Chang, Yifeng
- Technological Innovation of Unpowered Operational Gearing
- Chang, Yifeng
- The Stripping Technique of Glued Cellophane Tape Mechanics Design and The Numerical Study on the Flow Field of analysis
- Chavez Garcia, H.L.
- Recycled concrete, a solution for fine and coarse raw material for new concrete
- Chavez Garcia, H.L.
- Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
- Chavez Garcia, H.L.
- Analysis of Carbonation in Mortars made with Solid Waste as a Substitute for Cement
- Chen, Bin
- A Blur Restoration Research on Sequential Images of Bullets Taken in the Penetration Test
- Chen, Dongfeng
- Residual stress analysis on titanium alloy TC4 by LSP
- Chen, Wante
- The Stripping Technique of Glued Cellophane Tape Mechanics Design and The Numerical Study on the Flow Field of analysis
- Chen, Y.
- Pop-in characteristic induced by nanoindentation in ZrB2-SiC composites
- Cheng, Jing
- Research and application of harmonic drive in mechanical system
- Constantin, Draghici
- Statistical modelling of the spring back behavior for bending of v-shaped parts from common sheet metal
- Dai, Beibei
- Investigating the growth mechanism and photocatalytic properties of TiO2/Bacterial Cellulose hybrid materials
- Dai, Peng
- Investigation of Apparent Diseases of Urban Bridges in Shijiazhuang
- Dhital, Prabin
- Interfacial Adhesion due to Liquid Mediated Contact of Hydrophilic Solid Surfaces
- Du, Minshu
- Rapid Characterization of Hydrogen Evolution Electrocatalyst Spot Arrays by the Pulsed-Potential Substrate Generation/Tip Collection Mode of Scanning Electrochemical Microscopy
- Du, Xuchu
- Mechanical Properties and Corrosion Behavior of Cellular Al-Sc-Zr Foams
- Duan, Pengcheng
- Finite-element mode for parametric Analysis of wood frame shear walls
- Eduard, Golubchik
- Adaptive Approach to Structure And Properties Forming in Niobium Alloyed Pipe Steels
- Eva, Rykalova
- Evaluation of selected variants of claddings on the basis of CO2 production and energy intensity of production of building materials
- Fan, Zhenzhong
- Mechanical Properties and Corrosion Behavior of Cellular Al-Sc-Zr Foams
- Flores Lica, O.R.
- Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
- Gao, X.M.
- Loess cave dwelling under the conditions of heavy rain destruction form and prevention measures
- Gong, Wenjie
- Magnetocaloric properties in the PrFe2Ge2 antiferromgnet
- Gonzalez Valdez, F.M.
- Recycled concrete, a solution for fine and coarse raw material for new concrete
- Gonzalez Valdez, F.M.
- Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
- Gonzalez Valdez, F.M.
- Analysis of Carbonation in Mortars made with Solid Waste as a Substitute for Cement
- Gurenko, Boris
- A hydrodynamic calculation procedure for UV using CFD
- Han, Zhihong
- Rheology analysis of multiphase flow and its modeling
- Hana, Sevcikova
- Evaluation of selected variants of claddings on the basis of CO2 production and energy intensity of production of building materials
- Hana, Zhihong
- Study of the method during Micro- EDM Process
- Hao, Huimin
- A Study on the strengthening reconstruction plans of hyperbolic arch bridge
- Hao, Zhenli
- Numerical analysis of rainfall saturated-unsaturated seepage and stability of expansive soil slope with fissures
- He, XianQi
- Geometrical nonlinear analysis for multi-parameters of four tower cable-stayed bridge based on the bar element model
- He, Yuhong
- A Study on the strengthening reconstruction plans of hyperbolic arch bridge
- Heng, ZionHui
- Geometrical nonlinear analysis for multi-parameters of four tower cable-stayed bridge based on the bar element model
- Hernandez Barrios, H.
- Recycled concrete, a solution for fine and coarse raw material for new concrete
- Hernandez Barrios, H.
- Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
- Hernandez Barrios, H.
- Analysis of Carbonation in Mortars made with Solid Waste as a Substitute for Cement
- Hong, Wonhwa
- A Study on Asbestos Slate Buildings in Rural Areas of Korea
- Hong, Wonhwa
- A Study on Estimation of Demolition Waste Generation Index by using CART (Classification and Regression Tree) Analysis
- Hou, Dinggui
- Numerical analysis of rainfall saturated-unsaturated seepage and stability of expansive soil slope with fissures
- Hu, Mingyong
- Theoretical calculation of stiffness of composite laminated beam with T-section
- Hu, Rui
- Residual stress analysis on titanium alloy TC4 by LSP
- Huang, Li
- Mechanical Properties and Corrosion Behavior of Cellular Al-Sc-Zr Foams
- Huang, Weitai
- Optimization of Process Parameters in Plastic Injection Mold Simulation for Auto Lock-Parts using Taguchi-Grey Method Based on Multi-Objective
- Huang, Yongmei
- Research and application of harmonic drive in mechanical system
- Ivana, Lanikova
- Probability-Based Design and Life Cycle Assessment of a Spun Concrete Pole
- Ivanov, M.B.
- Investigations of the thermal stability of the submicrocrystalline titanium
- Jian, Wang
- Investigation on the Oxides Morphology of Fe-Based Amorphous Ribbons
- Jiang, Guomin
- Investigating the growth mechanism and photocatalytic properties of TiO2/Bacterial Cellulose hybrid materials
- Jiang, Honggang
- Engine isolate mount elastomers
- Jin, X.
- Study of Fractography and Overaging in Ly12 alloy
- Jin, Xiang
- Research of Electro-Optics Characteristics of Polymer Dispersed Liquid Crystals Doped with Thulium Oxide Nanoparticles Gd2O3 in UV Based on Numerical Fitting
- Khan, W.Q.
- Study of Fractography and Overaging in Ly12 alloy
- Kim, Taewoo
- A Study on Asbestos Slate Buildings in Rural Areas of Korea
- Kolobov, Yu.R.
- Improvement of Commercial Mg–Al–Zn–Mn Alloys by Rolling
- Kostukov, Vladimir
- A hydrodynamic calculation procedure for UV using CFD
- Kulchenko, Artem
- A hydrodynamic calculation procedure for UV using CFD
- Kunla, N.
- Changes in natural torsional frequency of horizontally-curved bridge by reinforcement
- Lai, Liangqing
- Engine isolate mount elastomers
- Lara Gomez, C.
- Recycled concrete, a solution for fine and coarse raw material for new concrete
- Lara Gomez, C.
- Mechanical Response of Portland Cement Mortars with added Expanded Polystyrene Spheres (EPS) under Accelerated Attack
- Lara Gomez, C.
- Analysis of Carbonation in Mortars made with Solid Waste as a Substitute for Cement
- Lee, Chihsheng
- Comparison of Two Extraction Methods for Spirogyra Extracellular Polymeric Substances
- Lee, Chihsheng
- The Changes of Polysaccharides in Extracellular Polymeric Substance for Cladophora glomerata under Different Salinity
- Lee, Kangguk
- A Study on Asbestos Slate Buildings in Rural Areas of Korea
- Lee, Kangguk
- A Study on Estimation of Demolition Waste Generation Index by using CART (Classification and Regression Tree) Analysis
- Lee, YiChao
- Comparison of Two Extraction Methods for Spirogyra Extracellular Polymeric Substances
- Lee, YiChao
- The Changes of Polysaccharides in Extracellular Polymeric Substance for Cladophora glomerata under Different Salinity
- Li, H.Y.
- Study of rail freight capacity release in the typical existing trunk after the completion of high-speed railway
- Li, Hongmei
- Dynamic Collapse Analysis of Reticulated Shell Structures with Substructures
- Li, Li
- Mechanism analysis of rain-wind induced vibration on high-voltage transmission line
- Li, Linxue
- Experiments Based Integral Design of Architecture and Structure
- Li, Na
- Finite-element mode for parametric Analysis of wood frame shear walls
- Li, Y.
- Study of rail freight capacity release in the typical existing trunk after the completion of high-speed railway
- Li, Zhen
- Heat transfer measurements on a micro disk with high rotational speed
- Lin, Anli
- Magnetocaloric properties in the PrFe2Ge2 antiferromgnet
- Liu, Guixiang
- Research of Electro-Optics Characteristics of Polymer Dispersed Liquid Crystals Doped with Thulium Oxide Nanoparticles Gd2O3 in UV Based on Numerical Fitting
- Liu, Hongying
- Using of Kriging surrogate model in multi-objective optimization of complicated structure
- Liu, Junhong
- Residual stress analysis on titanium alloy TC4 by LSP
- Liu, Lei
- Using of Kriging surrogate model in multi-objective optimization of complicated structure
- Liu, Shuyang
- Study of the method during Micro- EDM Process
- Liu, Shuyang
- Rheology analysis of multiphase flow and its modeling
- Liu, W.
- An experimental study on thermal conductivity of ceramsite cellular concrete
- Liu, W.W.
- Pop-in characteristic induced by nanoindentation in ZrB2-SiC composites
- Liu, Yanping
- Mechanism analysis of rain-wind induced vibration on high-voltage transmission line