Proceedings of the 2018 International Conference on Computer Modeling, Simulation and Algorithm (CMSA 2018)

Session: Intelligent Information System and Recognition Technology

24 articles
Proceedings Article

Genetic Fuzzy System in Weapon Control Module of Unmanned Tanks

Xinzhu Liu, Di Ding, Zihuan Yu, Zhongshuai Wang, Yuhan Dai, Jing Huang
The genetic fuzzy system is applied to weapon control module of unmanned tanks. In this paper, the simulation system is built to train the fuzzy rule base of genetic fuzzy system in order to get the optimal fuzzy rule base with training tasks. Testing tasks are used to test the success rate of different...
Proceedings Article

Unmanned Aerial Vehicle Landing Method Based on BeiDou Relative Navigation Technology

Haibo Jian, Jie Wang
Unmanned aerial vehicle (UAV) technology is rapidly developing and application, and UAV recycling is the key link in the application according to statistics, 80% of UAV failures occurred in the process of landing. Traditional UAV recycling methods have been unable to meet the modern UAV use. With the...
Proceedings Article

Multi-robot Synchronous Control Based on Multi-thread

Peng Xiong, Bitao Long, Zhengfu Lu, Xuwu Liu, Yulian Jiang
With the development of robot technology, many researchers have changed the investigating direction from single-robot control to multi-robot control. In terms of the group control of humanoid robot, this paper addressed a socket communication and multi-thread technology based on Python such that the...
Proceedings Article

The Selection of Neural Network Input Parameters Based on Association Rules

Lei Shi
Neural network has strong ability of nonlinear approximation and fitting, which was widely used in various prognosis prediction researches. Meanwhile, the selection of neural network input parameters was very important: the number of input layer nodes would increase as the number of input parameters...
Proceedings Article

Study of Double-holding Water Tank Liquid Level Control Base on Neural Networks PID Control

Yuli Wei
Aiming at the problem of the effect of longtime delay and nonlinear of the double-tank’s level control, the PID control of BP neural network tuning parameters is studied in this paper. The characteristics of the control system are analyzed minutely, a neural PID controller is designed and its control...
Proceedings Article

Multisensor Data Fusion Based on Modified D-S Evidence Theory

Yingming Zhou, Hongji Xu, Junfeng Sun, Lingling Pan, Baozhen Du, Min Chen
Dempster-Shafer (D-S) evidence theory has been widely used in multisensor data fusion to deal with uncertain information. But unreasonable results may be produced by using D-S combination rule in the case of that data are conflicting with each other. This paper proposes a modified evidence combination...
Proceedings Article

Research and Design of Intelligent Network Switch Based on Human Infrared and Light Intensity Sensor

Yiqin Bao
An intelligent network switch based on human infrared and light intensity sensors is designed by using human infrared sensor and light intensity sensor to realize the intelligent control of the home lamps. Switches will control the lights when there's only a man in the room and the light is dark, so...
Proceedings Article

The Design of Multi-mode Examinees Identity Verification System for Colleges and Universities

Jia Chen, Cong Chen
With the rapid development of information management in colleges and universities, traditional eye-observing verification methods cannot satisfy today’s requirement for examination management any more. Examinees’ identities need to be verified more effectively and accurately. In recent years, biometric...
Proceedings Article

Method of TCM Prescription Recognition Based on Template Matching Algorithm

Hanqing Zhao, Jie Luo, Caifeng Liu, Xinxia Lei, Zhiguo Wang
Objective: To explore a method to identify classical recipes of traditional Chinese medicine (TCM) from clinical prescriptions of traditional Chinese medicine (TCM). Methods: By using the template matching algorithm in the field of image processing, this paper designs a kind of computer algorithm for...
Proceedings Article

Tibetan Character Recognition Based on Machine Learning of K-means Algorithm

Huiwen Gong, Wei Xiang
In this paper, we analyze and extract the Tibetan text features structure based on k-means image character recognition algorithm. Through character library file generated from Tessract-ocr training, we improve the accuracy and recognition of image text recognition and extraction and realize the identification...
Proceedings Article

Real-time Terrain Mode Recognition Module for the Control of Lower-limb Prosthesis

Yifei Pan, Jiwen Zhang, Libin Song, Chenglong Fu
This paper is aimed to develop and evaluate a real-time terrain mode recognition system to assist the control of the lower-limb prosthesis. A wearable terrain recognition device, composed of an inertia measurement unit and a 2D-laser, was built to classify the types of terrain in front of the lower-limb...
Proceedings Article

Multimodal Cross-guided Attention Networks for Visual Question Answering

Haibin Liu, Shengrong Gong, Yi Ji, Jianyu Yang, Tengfei Xing, Chunping Liu
Visual Question Answering (VQA) is an attractive topic combin-ing computer vision with natural language processing. It is more challenging than text-based question answering because of its multimodal nature. The VQA reasoning process requires both effective semantic embedding and fine-grained visual...
Proceedings Article

Research of Power Wireless Private Network Technology in the Terminal Communication Access Network

Feng Wang, Yixin Ding, Ming Li, Junwei Ma, Xincong Shi, Lei Yan
The terminal communication access network is an important part of the power communication network and is the extension of the backbone network, which will provide a comprehensive communication support for the smart grid construction. Firstly, in this paper, technical characteristics of TD-LTE power wireless...
Proceedings Article

Evaluation of Impregnated Diamond Bit based on Image Processing Technology

Chong Wang, Linhong Xu, Jinfeng Zhen
Impregnated diamond bit are widely used in very difficult formation drilling. In the drilling process, the diamond particles embedded in the impregnated diamond bit will inevitable wear, loss and adhesive wear. In this case, the bonding between diamond particles and matrix and the diamond performance...
Proceedings Article

Research on the Key Technologies of Broadcasting Audio Quality Automatic Detection

Qi Wang, Xiao Han
As an important part of broadcast business, Broadcast audio quality testing guarantee the broadcast quality, it can find out audio quality problem during broadcasting process such as stereo phase inversion, too large of left and right level difference, mute and overload etc. The traditional detection...
Proceedings Article

Build of Dust Removal System Controlled by DCS and PLC Two-level Supervisory Control System

Qi Wang, Zhumei Sun, Jianyun Bai, Tianxing Han, Shaohong Liu
The dust removal system of a certain power plant was controlled by omron programmable Logic controller (PLC). It needs to be included in the master control system DCS (distributed control system) in order to fit the request of all control systems integration. Using a network protocol converter realize...
Proceedings Article

The Development of Multi-axis Embedded CNC System Based on Dual-core Chip

Xu Liu, Haixin Zou, Xiangfa Kong, Jun Lu
At present, from the selection of the chip to the molding of the product, the embedded CNC system will encounter various problems, such as insufficient performance of the processor, hidden dangers of the physical communication scheme between the chips, insufficient reconfigurability of the platform,...
Proceedings Article

Research on the Operational Effectiveness Evaluation Method of Multi-information Oriented Weaponry System

Tao Wang, Liuying Wang, Gu Liu, Haiqing Chen
In this paper, the operational capability analysis method of weapon equipment system oriented to multiple information is constructed by establishing the network model of weapons and equipment operations. Through the establishment of weapons and equipment for the effectiveness of network multi-information...
Proceedings Article

A Moving Objects Index Method Integrating GeoHash and Quadtree

Ya Ban, Rui Wang, Hongjing Liu, Jing Yuan, Hao Luo, Fuli Yang, Ling Yu, Xinping Xu
To take into account of frequent update, efficiency and query capability, a new full-time index structure was proposed with help of one-to-one match between Quad-tree nodes and GeoHash codes, named GQ-tree, which supported moving objects updating frequently. An efficient index update algorithm based...
Proceedings Article

Design of Campus Comprehensive Service System Based on Android

Han Qin, Wei Xiang
In this paper, we design a mobile terminal campus comprehensive service system, which based on Android, and combines HTML, PHP scripting language programming, Java object-oriented programming, as well as using Phonegap open source framework, and use the MySQL user database design. From function, form...
Proceedings Article

Design and Implementation of Ion Implantation and Deposition Signal Generator Based on PLC and Touch Screen

Weiquan Shu
In order to improve ion implantation and deposition signal generator to make it more stable and convenient, take advantage of the great anti-jamming characteristic of PLC and the convenient usage of touch screen, use the pulse output and high-speed counter ability of PLC and communication ability of...
Proceedings Article

Friend Recommendation System Based on Geolocation and Contents of Users

Mingyue Duan, Jing Huang, Jiaxuan Zhang, Yunjie Tian, Dongwei Li, Bin Wang
In recent years, with the rapid development of wireless mobile network and smart phone operating systems, various social software based on wireless Internet has emerged one after another. Current popular social software such as QQ and WeChat have become important tools for people to meet new friends....
Proceedings Article

Decentralized Approach for Autonomous Mechatronic Oil Extraction

Igor Kalyaev, Anatoly Kalyaev, Iakov Korovin
In the paper we tried to depict the process of creation of autonomous mechatronic oil extraction production (AMOEP). Basically we propose that in its membership AMOEP includes a variety of well agents (WA) of different purposes to be proceeded. The key point of such AMOEPs must be a controller, which...
Proceedings Article

Standardized Process Optimization and Realization of Zhejiang Tobacco Industrial Based on the Workflow Framework

Yingying Shen, Fang Wu, Guang Yao, Zhenmin Miao
With the development of information technology, for the outspread need of management function of China Tobacco Zhejiang Industrial, to reinforce company standardization management is an important way to improve company market competitiveness, and realize cost decreasing and benefit increasing. Aim at...