Proceedings of the International Symposium on Mechanical Engineering and Material Science

292 authors
Aguilar, Jorge A. Mora
Estimation of the thermal loads on buildings with CAD systems support
Aleaga, Arlys M. Lastre
Estimation of the thermal loads on buildings with CAD systems support
Belyakova, Elena Aleksandrovna
New Composite Cement for Construction 3D Printers
Belyakova, Elena Aleksandrovna
The Influence of Plasticizerson the Composition of Cement Stone Hydration Products
Bureerat, Sujin
Hybrid TLBO and BFGS for structural health monitoring optimisation problems
C, Fei
Reliability Prediction for CNC Machine of Spindle System
Cao, Yue
Advances in Study on Structure of Polysaccharide
Cao, Erfang
Effect of Turntable Structure on Electromechanical Characteristics of Laser Tracker System
Cao, Wenming
Research on friction stir welded joints of Copper to Magnesium alloy
Cao, Qi
Research on Current Control Technology of Fine Plasma Cutting
Cao, Jing
The Design of a Heavy-load Palletizing Robotic Structure for Coating Handling
Ceng, Daoshuang
Finite Element Analysis and Optimization Design of Combined Vehicle Suspension Girder Lateral Stabilizer Bar Bushing
Chai, Yan
Experimental Investigation of Oblique Laser Shock Processing on Aero-engine Fan Shaft
Chen, Ning
Study on Apoptosis of Human Hepatoma Cell line HepG-2 Induced by Total Alkaloids in H.littoralis
Chen, Jin-zhong
SMFF Computation for Probe of Online Magnetic Flux Leakage Detection System with combination of ANSYS and Virtual Work Method
Chen, Jiajun
Materials Forming of Dolphin Model for Hydrodynamic Research Based on the 3D Printing Technology
Chen, Chiou-Chuan
Light Weight Medium (Pottery Spherical) Cultivation of Plants Used in Green Roof Feasibility Studies
Chen, Chun-Lin
Light Weight Medium (Pottery Spherical) Cultivation of Plants Used in Green Roof Feasibility Studies
Chen, Liang
Research on the determination method of the intermittent grounding faults of shipboard medium voltage power system
Chen, Yuhua
Research on friction stir welded joints of Copper to Magnesium alloy
Chen, Yonglin
Research on Fuel Tank Model Selection of LNG Power Ship Based on Evaporation Rate Control and Construction Cost
Chen, Hongqun
Application of Environmental Friendly Material R32/R1234ze in Heat Pump Water Heater
Deng, Jiangxia
The influence of oxygen pressure on the crystallographic structure and magnetic properties of BaM films on Al2O3(0001) substrate
Deng, Xianyuan
The research on the response of the structure and the load of gantry cranes cylindrical structures based on strain-measuring method
Deng, Xianyuan
Research of Portal Crane Vibration Modal Analysis
Dijm rescu, Maria-Cristina
Welding Material Selection for a Specific Butt V-Weld by Means of Assisted Stress and Fatigue Calculations
Dijm rescu, Manuela-Roxana
Welding Material Selection for a Specific Butt V-Weld by Means of Assisted Stress and Fatigue Calculations
Ding, Ang
Study on magnetic loss properties of ultra-thin nanocrystalline soft magnetic alloy Fe73.4Cu0.6Nb3.5Si13.5B9.0
Ding, Ying
Shipping Demand Scheme Modeling and Measurement Based on Task Constraints
Dobrynina, Oksana L.
Method of Evaluation of Forestry Machine Roll-over Protective Structure Efficiency
Evstigneev, Alexandr Viktorovich
On the Determination of the Threshold Content of Fibrous Nanomodifier
Evstigneev, Alexandr Viktorovich
Method and Software for Modeling the Building Materials as Dispersions
Fang, Wei
Zero-turn-off thyristor zero voltage block media recovery analysis of influencing factors
Feng, Feng
An Empirical Study on the Coordinated Development of the Service Industry and the Innovation of Science and Technology
Frolov, M.V.
Lime composition for the walls of buildings made of aerated concrete
Fu, Yujian
Research on Current Control Technology of Fine Plasma Cutting
Gao, Shiyong
Advances in Study on Structure of Polysaccharide
Gao, Jianxin
Phase-Shifting Control of Double Pulse in Harmonic Elimination
Garc¡a, Alexis Cordov,s
Estimation of the thermal loads on buildings with CAD systems support
Gong, Hongwei
Theoretical and Experimental Study on the Water Curtain Shape and Mechanical Relationship of the Smoke Control System
Gordon, Gerardo M. Ramos
Estimation of the thermal loads on buildings with CAD systems support
Grintsova, Olga Vasilyevna
The Influence of Plasticizerson the Composition of Cement Stone Hydration Products
Guo, Zhongliang
The research on the response of the structure and the load of gantry cranes cylindrical structures based on strain-measuring method
Guo, Guikai
Analysis of Natural Frequency Sensitivity of Truck Body
Guo, Zhongliang
Research of Portal Crane Vibration Modal Analysis
Han, Mangui
The influence of oxygen pressure on the crystallographic structure and magnetic properties of BaM films on Al2O3(0001) substrate
Han, Xiaojin
"San Cai" Human Factors Analysis Model of Civil Aviation Maintenance
Hao, Jie
Study on magnetic loss properties of ultra-thin nanocrystalline soft magnetic alloy Fe73.4Cu0.6Nb3.5Si13.5B9.0
He, Peng
Study on joint formation evolution in laser microwelding of Pt-10%Ir and 316 LVM SS crossed wiresCrossed wire, Laser microwelding, Simulation, Joint formation
He, L Z
Investigations of continuous casting extrusion on the microstructures and properties of Zn-Al and Zn-Al-Ti alloys
He, L.Z.
Effect of ultrasonic cavitation on the wetting and reaction of Al-Ti/C interface
He, Ren-yang
SMFF Computation for Probe of Online Magnetic Flux Leakage Detection System with combination of ANSYS and Virtual Work Method
He, Shan
The research on the response of the structure and the load of gantry cranes cylindrical structures based on strain-measuring method
He, Shan
Research of Portal Crane Vibration Modal Analysis
He, Zhicong
Forster Resonance Energy Transfer in a Hybrid System of CdTe Quantum dots-RhB
He, Cui
Control Strategy for a Micro Smart Grid to Meet the Energy Demand of a Household
Hou, S.F.
Preparation and Characterization of CA/GO Mixed Matrix Forward Osmosis Membranes
Hou, K.
Preparation and Characterization of CA/GO Mixed Matrix Forward Osmosis Membranes
Hsu, Shu-Chen
Implementing Computer Aided Material Design of Multiple Cursors for Disabled People with InLinPreRa
Hu, Xiaochun
Coastline Identification from Remote-sensing Image Using Informative Vector Machine Learning
Hua, Zhen
Investigation of Speckle Image Correction Technique Based on Coding Assistance
Huang, Yongde
Study on joint formation evolution in laser microwelding of Pt-10%Ir and 316 LVM SS crossed wiresCrossed wire, Laser microwelding, Simulation, Joint formation
Huang, JingHui
Study on magnetic loss properties of ultra-thin nanocrystalline soft magnetic alloy Fe73.4Cu0.6Nb3.5Si13.5B9.0
Huang, C.T.
Punching Shear Strength Model for RC Slab-Column Connection Based on Multiaxial Strength Theory of Concrete
Igor, Garkin
Effective profiles for building constructions
Jeon, Rock-Won
Numerical Analysis Research and Experimental Verification of the Heat Leak of a Cryogenic Vacuum Jacket Valve
Ji, Song
Study on magnetic loss properties of ultra-thin nanocrystalline soft magnetic alloy Fe73.4Cu0.6Nb3.5Si13.5B9.0
Ji, Tie-zheng
Synthesis of Polyethylenamine Cellulose and Its Absorbing Ability to Chromium (VI)
Ji, Chenfeng
Advances in Study on Structure of Polysaccharide
Ji, Jie
Control Strategy for a Micro Smart Grid to Meet the Energy Demand of a Household
Jiang, Aihua
The research on the response of the structure and the load of gantry cranes cylindrical structures based on strain-measuring method
Jiang, Aihua
Research of Portal Crane Vibration Modal Analysis
Jiang, Qinglin
The Simulation Study on Deep-sea Microbes Sampling of Holding the In-Situ Pressure Based on the Pressure Compensation with 316L Stainless Steel Accumulator
Jiang, Juncheng
Theoretical and Experimental Study on the Water Curtain Shape and Mechanical Relationship of the Smoke Control System
Jiang, Ranran
Theoretical and Experimental Study on the Water Curtain Shape and Mechanical Relationship of the Smoke Control System
Jin, Honglin
The Discussion of the further Studies of the Magnetic Suspension Vibration Isolator
Jin, Chaoguang
Research on Fuel Tank Model Selection of LNG Power Ship Based on Evaporation Rate Control and Construction Cost
Jing, Lv
System Reliability Analysis of Half-through Concrete-filled Steel Tubular Arch Bridge Based on Optimization Technique
Kalashnikov, Vladimir Ivanovich
New Composite Cement for Construction 3D Printers
Kalashnikov, Vladimir Ivanovich
The Influence of Plasticizerson the Composition of Cement Stone Hydration Products
Kang, Cunfeng
Design of the 4-DOF Parallel Robot Control System Based on EtherCAT
Khalid, Huzaifa
The stability of dual-PSD based calibration system without its relative location to 3D forming of carbon fiber
Kim, Seon-Chil
A New Ptosis Auto Analysis System and Algorithms Based on Surface Electromyography Sensor
Kim, Si-Pom
Numerical Analysis and Experimental Verification Based on Design Parameter Variation of Vacuum-Insulated Pipe for Cryogenics
Kim, Si-Pom
Numerical Analysis Research and Experimental Verification of the Heat Leak of a Cryogenic Vacuum Jacket Valve
Kirill, Nezdanov
Effective profiles for building constructions
Korolev, Engenij Valerjevich
On the Determination of the Threshold Content of Fibrous Nanomodifier
Korolev, Evgenij Valerjevich
Method and Software for Modeling the Building Materials as Dispersions
L, Guofa
Reliability adaptive modeling method for CNC Machine Tools based on kernel function
L, Guofa
Reliability Prediction for CNC Machine of Spindle System
Lee, Ho-Sung
Characterization of Superplastic Behavior of AA2195 by Bulging Test
Lee, Ho-Sung
A Study on Microstructure of AA2219 Friction Stir Welded Joint
Lee, Chiou-Chuan
Light Weight Medium (Pottery Spherical) Cultivation of Plants Used in Green Roof Feasibility Studies
Lee, Jong-Ha
A New Ptosis Auto Analysis System and Algorithms Based on Surface Electromyography Sensor
Lee, Jae-Hoon
Numerical Analysis and Experimental Verification Based on Design Parameter Variation of Vacuum-Insulated Pipe for Cryogenics
Lee, Geun-Ho
Numerical Analysis and Experimental Verification Based on Design Parameter Variation of Vacuum-Insulated Pipe for Cryogenics
Lee, Jae-Hoon
Numerical Analysis Research and Experimental Verification of the Heat Leak of a Cryogenic Vacuum Jacket Valve
Li, MingLi
Study on magnetic loss properties of ultra-thin nanocrystalline soft magnetic alloy Fe73.4Cu0.6Nb3.5Si13.5B9.0
Li, Y L
Investigations of continuous casting extrusion on the microstructures and properties of Zn-Al and Zn-Al-Ti alloys
Li, Y.L.
Effect of ultrasonic cavitation on the wetting and reaction of Al-Ti/C interface