Proceedings of the 2nd Annual International Conference on Advanced Material Engineering (AME 2016)

900 authors
Ai, Li-Mei
Preparation and Characterization of Silica Gels Catalysts Containing Undecatungstocobaltoindic Heteropoly Acid
Anzai, Hiroaki
Nodal Gap Energy in High-Tc Cuprate Superconductors: A new Paradigm
Anzai, Hiroaki
Doping- and Momentum-Dependent Superconducting Gap of Bilayer Cuprate Bi2Sr2CaCu2O8+ Revealed Using Low-energy ARPES
Arita, Masashi
Nodal Gap Energy in High-Tc Cuprate Superconductors: A new Paradigm
Arita, Masashi
Doping- and Momentum-Dependent Superconducting Gap of Bilayer Cuprate Bi2Sr2CaCu2O8+ Revealed Using Low-energy ARPES
Bai, R.S.
Experimental Study on Preparation of Mullite Decorative Materials
Bi, Yong-Guang
Orthogonal Design Hydrogen Peroxide Degradation of Aniline Process
Bi, Yong-Guang
Test Preparation Asparagus Total Polysaccharides of Scanning and Standard Curve
Bi, Zhe
Determination of Nickel and Iron Carbonyl in Carbon Monoxide by ICP-MS Methods and a Pyrex Gas Washing System
Bian, Li-Chun
A Micromechanics Model for Material Property of Composite
Bian, Li-Chun
A Study on Effective Elastic Modulus of Nanocomposites
Cai, H.Q.
Experimental Study on Preparation of Mullite Decorative Materials
Cai, Liu-Lu
Gold Recovery from a Gold Tailing by Floatation and Thiourea Leaching
Cai, Liu-Lu
Process Mineralogy of Uranium Ore with High Fluorine
Cao, Guo-Xuan
A Novel High Strength Porous Hydroxyapatite/Silk Fibroin Composite: Preparation and Characterization
Cao, Ji-Ping
A Feature Extraction Algorithm of Damaged Military Area Based on Fuzzy Connectedness
Cao, Jian-Bo
Design of Novel Energy Recovery Damper Based on EAP
Cao, Jian-Bo
Design for the Multi-functional Floating Garbage Disposal Device
Cao, Jian-Xia
Design for the Multi-functional Floating Garbage Disposal Device
Cao, Y.
High Speed Milling of a Large Thin Sheet Copper Part with a Vacuum Fixture on a CNC Machine Tool
Cao, Yi-Jun
Effect of Ambient Temperature on Solid Motor Grain in Shipboard Multi-launch Container
Chai, Le-Hao
Growth of Aligned Carbon Nanotubes on Different Metal Substrates
Chang, Cheng-Gong
Influence of Raw Materials Ratio on Properties of New Magnesium Phosphate Cement
Chang, Y.P.
Study on Impact Wear Properties of the Surface Composites Reinforced by Particles
Chen, An
Fatigue Behavior of 2198-T8 Aluminum-lithium Alloy with Riveted Lap Joints
Chen, Chen
PMMA Lens Design and Manufacturing for Indoor Uniform Illumination
Chen, Da-Peng
Study of under Coating Recognition by Pulse Thermography
Chen, Da-Peng
The Inspection of Wind Blades Using Thermography with Different Exciting Methods
Chen, Guo-Qiang
Flame Retardant Finish of Silk Fabric with Dimethyl Phosphonate Doped Silica Sol
Chen, Guo-Qiang
Optimization of a Phosphorus-doped Sol-gel Silica Sol Coating on Cotton Fabrics
Chen, J.
Effects of Probiotics Diet Fed Myxcobacteria (JCH-04) on Survival, Growth, Digestive Enzymes Activities and Aquatic Environment in Grass Carp (Ctenopharyngodon idellus)
Chen, Jun
Study for Rapid Determination of Tetrodotoxin Based on Lateral Flow Immunoassay
Chen, Kai
Preparation of Superhydrophobic ZnO Surface Derived from Wood Template
Chen, Le
Elastic properties and Debye Temperature of Tetragonal and Cubic Ga3Zr under High Pressure: A First-Principles Investigation
Chen, Ling
Finite Element Analysis of Structural Dynamic Testing of Composite Quick-Install Scaffold
Chen, Mi-Mi
Preparation of Activated Carbon from Waste Penicillin Mycelium
Chen, Ran
The Electrical Tree of Polyethylene Insulation Study Progress
Chen, Rui-Xue
Highly Efficient Dye-Sensitized Solar Cells based on Carbon Nanofibers Counter Electrodes
Chen, W.
Effect of Mo Content on the Microstructure and Mechanical Properties of TiC Steel Bonded Carbide
Chen, X.X.
Synthesis of Monolayer MoS2 by CVD Approach
Chen, Xue-Wei
Orthogonal Design Hydrogen Peroxide Degradation of Aniline Process
Chen, Xue-Wei
Test Preparation Asparagus Total Polysaccharides of Scanning and Standard Curve
Chen, Y.
Elastic Constants and Properties of B2-type FeAl and Fe–Cr–Al Alloys from First-Principles Calculations
Chen, Yan-Hua
Analysis of Two Kinds of Chemical Reagents on Improvement of Local Soil Corrosion Environment
Chen, Yong
Gold Recovery from a Gold Tailing by Floatation and Thiourea Leaching
Chen, Yu-Xi
Theoretical Study on Influence Factors of the Angle of Inner Hole Generatrix through Cone Hole Open-die Cold Extrusion
Chen, Yun-Bo
Optimization of a Phosphorus-doped Sol-gel Silica Sol Coating on Cotton Fabrics
Chen, Yun-Gui
High Strength Mg-5Sn Alloy Prepared by Rapidly Solidified Powder Metallurgy
Chen, Yun-Gui
A Solid-State Metal Hydride/Oxygen Cell using La0.78Ce0.22Ni3.73Mn0.30Al0.17Fe0.50Co0.30 in the Anodeand Nafion as Electrolyte
Chen, Zhen-Qiang
Effect of Geometric Error of Bearing Parts on the Radial Runout of Rolling Bearing
Chen, Zhi-Qian
Effect of Electric Field on Aging Phase Transformation in Al-Zn-Mg-Cu Alloys
Chen, Zong-Yong
An Equivalent Model of Corrugated Structures
Cheng, H
Experimental and Simulative Study on the Hydrodynamics of the Rectangular Otter Board
Cheng, Hong-Wei
Effect of Preparation Method on the Performance of 10Ni/MgAl2O4 for Dry Reforming of Coke Oven Gas
Cheng, Jie-Jie
Influence of Electrolyte Concentration on Photovoltaic Performance of DSSCs Based on TiO2 Nanotube Array
Cheng, Jun-Feng
Experimental Study on a Novel Solar Watering Tube for Producing Water from the Air
Cheng, Jun-Hong
Stress Relieve in High Rigidity Metal Component Added Mass by Vibration
Cheng, L.D.
Risk Assessment of Bisphenol A (BPA) in Thermochromic Textiles
Cheng, Nan-Pu
Effect of Electric Field on Aging Phase Transformation in Al-Zn-Mg-Cu Alloys
Cheng, Peng
High Strength Mg-5Sn Alloy Prepared by Rapidly Solidified Powder Metallurgy
Cheng, Shi-Hong
Comparative Trial on Biological Contact Oxidation and Bio-filter Process for Wastewater Treatment
Cheng, Wang-Jun
Influence of Strain Rate on Dynamic Recrystallization Behaviors of a Near- Titanium Alloy During Isothermal Hot-tensile Deformation:Experimental and Simulative Investigation
Chi, Cheng-Zhong
Influence of Strain Rate on Dynamic Recrystallization Behaviors of a Near- Titanium Alloy During Isothermal Hot-tensile Deformation:Experimental and Simulative Investigation
Cong, Jian
Study for Rapid Determination of Tetrodotoxin Based on Lateral Flow Immunoassay
Cong, Ri-Jie
The Austenite Grain Growth Behavior and Mathematical Model of 20CrMnTiH
Cui, Jian-Ying
Theoretical Study on Influence Factors of the Angle of Inner Hole Generatrix through Cone Hole Open-die Cold Extrusion
Cui, Li-Hong
Preparation and Characterization of Pineapple Leaf Nanocellulose by High Pressure Homogenization
Cui, Mi-Dou
High Efficient Co3S4 Supported by Carbon Nanofibers Composite Counter Electrode Catalyst for Dye-sensitized Solar Cells
Cui, Zhi-Ming
High Strength Mg-5Sn Alloy Prepared by Rapidly Solidified Powder Metallurgy
Dai, Xu
A Solid-State Metal Hydride/Oxygen Cell using La0.78Ce0.22Ni3.73Mn0.30Al0.17Fe0.50Co0.30 in the Anodeand Nafion as Electrolyte
Deng, Cheng-Ji
Effects of Powder Characteristics on Rheological Properties of Alumina Slurries
Deng, Jian-Hong
Reactivity and Kinetic Analysis of Coal Chars Combustion under Oxy-fuel Conditions
Deng, Ming-Rong
Test Study on Cube Compressive Strength of Recycled Lightweight Aggregate Concrete
Deng, Ming-Xiang
The Two-scale Asymptotic Expansion for One Class of Thermoelastic Problem in Periodic Composite with Boundary Layer
Deng, Peng
Microstructure and Wear Behavior of in situ TiB2/2024 Composite Fabricated by Spray Deposition Technique
Deng, Q.
Dynamic Compressive Properties of 2D-C/SiC Composites under Low Temperature
Deng, Shi-Ting
Orthogonal Design Hydrogen Peroxide Degradation of Aniline Process
Deng, Shi-Ting
Test Preparation Asparagus Total Polysaccharides of Scanning and Standard Curve
Deng, Wei
Effects of the Amount and Introducing time of Emulsifier on the Preparation of Carboxylated Polystyrene Particles
Deng, Wen-Wen
Analysis of Disc Wear Based on Trajectory Simulation in Lapping Process
Deng, Xiao-Jun
The Two-scale Asymptotic Expansion for One Class of Thermoelastic Problem in Periodic Composite with Boundary Layer
Deng, Yu
Preparation of Thermosetting Polystyrene Insulation Board
Deng, Yu-Lin
Aptamer Based Microfluidic Chip for Microbial Detection
Di, Qi
Structure Stability and Growth Strategies of the (MgO)n (n=1-13) Clusters
Di, Yu-Xian
Break Impact Influence Factor of Tension Composite Insulator String
Ding, J.
Synthesis of Monolayer MoS2 by CVD Approach
Ding, Wu-Cheng
High Strength Mg-5Sn Alloy Prepared by Rapidly Solidified Powder Metallurgy
Ding, Xiu-Juan
Technology Research on the Waterproofness and Alkali Resistance of Silane Coupling Agent Modified Fiber Glass Board
Ding, Xiu-Juan
The Performance Study of Modified Glass Wool Board External Thermal Insulation System and the Application in the Energy-efficient Construction in Existing Building
Ding, Xiu-Juan
Mechanical Properties of Phenolic Foam Modified Insulation Board by Urethane Oligomer
Ding, Xiu-Juan
Preparation of Thermosetting Polystyrene Insulation Board
Dong, An-Ping
Numerical Analysis of Two-phase Flow and Heat Transfer in External Cyclic Purification Hot-dip Galvanizing Bath
Dong, Deng-Ke
Fatigue Behavior of 2198-T8 Aluminum-lithium Alloy with Riveted Lap Joints
Dong, Jin-Mei
Influence of Raw Materials Ratio on Properties of New Magnesium Phosphate Cement
Dong, T-W
Experimental and Simulative Study on the Hydrodynamics of the Rectangular Otter Board
Dong, Xue-Wu
Stress Relieve in High Rigidity Metal Component Added Mass by Vibration
Dong, Yong-Gang
A Research on the Metal's Three-dimentional Plastic Flow Mechanism in Rail Universal Rolling
Dou, Qiang
Effect of Particle Size of -nucleating Agent on the Crystallization and Mechanical Properties of Isotactic Polypropylene
Du, Jie
Mechanical Structure Design of Stress-generating System of Low-frequency Mechanical Spectrum Apparatus
Du, Xiao-Feng
Coating Thickness Controlled by Different Protective Atmospheres for A Hot Dipped 0.7mm Thin Steel Slab