Proceedings of the 2nd Annual International Conference on Advanced Material Engineering (AME 2016)
900 authors
- Li, Wen-Juan
- Gold Recovery from a Gold Tailing by Floatation and Thiourea Leaching
- Li, Wen-Ting
- A Simple Route to Asymmetric Composite Particles via Co-assembly of Block Copolymer and Inorganic Nanoparticles in Solution
- Li, Xi-Wu
- Effect of In Situ TiB2 Particles on the Microstructure and Mechanical Properties of Spray deposited Zn-30Al-1Cu Alloy
- Li, Xi-Wu
- Effect of Cu Additions on the Microstructure and Mechanical Properties of Spray Deposited Zn-30Al Alloy
- Li, Xiang-Qing
- Controllable Preparation and Electrochemical Behavior of Nanostructured Zn2GeO4
- Li, Xiang-Yu
- A Metal Cylindrical Shell Expansion Loading Technique based on Rock Triaxial Testing System
- Li, Xiao
- Effect of Electric Field on Aging Phase Transformation in Al-Zn-Mg-Cu Alloys
- Li, Xiao
- The Influence of ABS with Different Contents of Butadiene on the Crystallization Behavior of MCPA6/ABS Copolymer Alloys
- Li, Xiao-Li
- Study of under Coating Recognition by Pulse Thermography
- Li, Xiao-Li
- The Inspection of Wind Blades Using Thermography with Different Exciting Methods
- Li, Xiao-Wei
- High Efficient Co3S4 Supported by Carbon Nanofibers Composite Counter Electrode Catalyst for Dye-sensitized Solar Cells
- Li, Xiao-Xia
- Electrochemical Polymerization and Characterization of Polyaniline/Carbon Nanotube Composite Films
- Li, Xin-Hua
- Growth of Aligned Carbon Nanotubes on Different Metal Substrates
- Li, Xin-Min
- Break Impact Influence Factor of Tension Composite Insulator String
- Li, Xue
- A Simple Route to Asymmetric Composite Particles via Co-assembly of Block Copolymer and Inorganic Nanoparticles in Solution
- Li, Yan
- Performance of Tungsten Alloy Hardened by Electrospark
- Li, Yan
- Isothermal Oxidation Behavior of Electrospark Deposited NiCrAlY Coatings on Gun Steel at 950°C
- Li, Yi
- Microstructures and Mechanical Properties of MIG Welding Joint of 7005 Aluminum Alloy
- Li, Ying
- Influence of Raw Materials Ratio on Properties of New Magnesium Phosphate Cement
- Li, Ying-Ying
- Fabrication of ZnO Hollow Microspheres Organized by ZnO Nanorods via Single-step Hydrothermal Process
- Li, You
- Mn-Zn Ferrite Prepared by Sr2+ Doping
- Li, Yu-Qian
- An Equivalent Model of Corrugated Structures
- Li, Yuan-Lin
- Reactivity and Kinetic Analysis of Coal Chars Combustion under Oxy-fuel Conditions
- Li, Zhao-Hui
- Preparation and Surface Modification of Monodisperse Fe3O4 Nanoparticles
- Li, Zhen-Hua
- Finite Element Analysis of Ti5553 Alloy during Equal Channel Angular Extrusion
- Li, Zheng
- Ink-Bottle Pore Changes in Cement Concrete Corroded by Environmental Coupling Effect
- Li, Zhi
- Structure Stability and Growth Strategies of the (MgO)n (n=1-13) Clusters
- Li, Zhi
- Geometries, Stability and Growth Strategies of Small AlnCu (n=1-9) Clusters
- Li, Zhi-Hui
- Effect of Cu Additions on the Microstructure and Mechanical Properties of Spray Deposited Zn-30Al Alloy
- Li, Zhi-Yuan
- Experimental Study on Ultra-lightweight Fire-resistive Engineered Cementitious Composite
- Li, Zhi-Zhui
- Effect of In Situ TiB2 Particles on the Microstructure and Mechanical Properties of Spray deposited Zn-30Al-1Cu Alloy
- Liang, M.N.
- The Research Progress on Method of Preparation of Biomass Charcoal and Modification
- Liang, Xiang
- The Influence of ABS with Different Contents of Butadiene on the Crystallization Behavior of MCPA6/ABS Copolymer Alloys
- Liang, Yi
- GaN Films under Different Growth Mechanisms Studied by Synchrotron X-ray Absorption Spectroscopy
- Liang, Z.-L.
- Experimental and Simulative Study on the Hydrodynamics of the Rectangular Otter Board
- Liao, Guan-Ming
- Synthesis and Properties of 1-(3,5-Dimethyl-4-isoxazolyl) -2-[2-methyl-5- (5-hydroxymethylpyridyl)-3-thienyl] Perfluorocyclopentene
- Liao, K.
- The Magnetic Control Tunable Characteristics of Localized Modes of One-dimensional Cantor Quasicrystal Structure Containing Nanoparticle Magnetic Fluid
- Liao, Zheng-Fu
- A Novel High Strength Porous Hydroxyapatite/Silk Fibroin Composite: Preparation and Characterization
- Lin, Cong-Mei
- Effect of Binder Content on the Non-linear Creep Properties of Polymer Bonded Explosives
- Lin, Feng
- Co2+-Exchanged Titanate Nanotubes as a Novel Heterogeneous Catalyst for Peroxymonosulfate Activation and Degradation of Organic Pollutants
- Lin, Hao-Hsiung
- GaN Films under Different Growth Mechanisms Studied by Synchrotron X-ray Absorption Spectroscopy
- Lin, Mu
- Effects of Laser Cladding on Thermal Tensile Property and Fracture of Gas Turbine Engine Blade Material GH864
- Lin, Peng
- Influence of Strain Rate on Dynamic Recrystallization Behaviors of a Near- Titanium Alloy During Isothermal Hot-tensile Deformation:Experimental and Simulative Investigation
- Lin, Sheng-Xuan
- Synthesis and Adsorption Properties of Ti2O(PO4)2·2H2ONanobelts
- Lin, Sheng-Xuan
- Badminton-like LiCoPO4 Nanomaterials: Synthesis, Characterization and Electrochemical Performance as Lithium-Ion Battery Cathodes
- Lin, Song-Yi
- Preparation, Hydrolysis and Storage Analysis of Alkaline Protease Microcapsules
- Ling, Li-Xing
- Comparative Trial on Biological Contact Oxidation and Bio-filter Process for Wastewater Treatment
- Ling, Ling Ling
- Design of GFRP Engine Mount Frame by Using Topology Optimization
- Liu, B.
- The Effects of Dislocations on the Crystal Growth Rate of Silicon --A Molecular Dynamics Study
- Liu, Bin
- Break Impact Influence Factor of Tension Composite Insulator String
- Liu, Bing
- Effects of Eletro Deposition Process Parameters on the Tribological Properties of Ti (CN) Particles Reinforced Ni-base Alloy Composite Coatings
- Liu, C.
- Study on the Photocatalytic Removal of Styrene in Water
- Liu, Can
- Study on Growth Conditions for High Quality Hydrogenated Amorphous Silicon Oxide Films
- Liu, Cao-Lan
- Break Impact Influence Factor of Tension Composite Insulator String
- Liu, Cheng
- Research on Defects of Hastelloy C-276 Tube Stagger Spinning Process
- Liu, De-Gui
- Finite Element Modeling of Power Spinning of Thin-walled Ti2AlNb Alloy Shell
- Liu, Dian-Hong
- PMMA Lens Design and Manufacturing for Indoor Uniform Illumination
- Liu, F.
- Risk Assessment of Bisphenol A (BPA) in Thermochromic Textiles
- Liu, Gang
- Lightning Protection Design for 10kV Composite Distribution Tower
- Liu, Gui-Ju
- Preparation of Superhydrophobic ZnO Surface Derived from Wood Template
- Liu, Hai-Long
- Performance of Tungsten Alloy Hardened by Electrospark
- Liu, He-Yi
- Synthesis of Biomorphic Fe2O3 Fibers Derived from Silk Template
- Liu, Hong-Wei
- Effect of In Situ TiB2 Particles on the Microstructure and Mechanical Properties of Spray deposited Zn-30Al-1Cu Alloy
- Liu, Hong-Wei
- Effect of Cu Additions on the Microstructure and Mechanical Properties of Spray Deposited Zn-30Al Alloy
- Liu, Hua-Gang
- Analysis and Solution of the Crack of the Outer Plate of the Door
- Liu, Hui-Xia
- Investigation of Weldability of Multi-layer Metals by Laser Impact Welding
- Liu, J.
- Study on Anti-scaling Performance of Scaling Inhibitor Used during Calcium Scaling Period of Oilwells in ASP Flooding
- Liu, J.
- Effect of Nickel Pre-plating on the Plating of Zn-Ni Alloy Coating on Stainless Steel Substrate
- Liu, J.N.
- Oxidation Behavior of TP304H in Water Vapor at 590 °C
- Liu, Jia-Hui
- Effect of Binder Content on the Non-linear Creep Properties of Polymer Bonded Explosives
- Liu, Jia-You
- Value Engineering Method for Selection of Gas Pipeline Materials
- Liu, Jing-Jin
- Effect of Annealed Temperature on Microstructure and Magnetic Properties of Ag/Fe/Ag Nanogranular Films
- Liu, Jun
- A Simple Route to Asymmetric Composite Particles via Co-assembly of Block Copolymer and Inorganic Nanoparticles in Solution
- Liu, Kai
- Thermodynamic Phase Numerical Simulation of Torsion Beam based on LS-DYNA
- Liu, Li
- Preparation and Properties of Hemp Stem Powder Reinforced Flexible Polyurethane Foams
- Liu, Li-Ming
- Effect of Different Nanoparticles on Seed Germination and Seedling Growth in Rice
- Liu, Li-Sheng
- Cure-Dependent Viscoelastic Analysis on the Residual Stresses and Distortion Created in Composite Corner during Curing
- Liu, Lin-Lin
- Analysis of Two Kinds of Chemical Reagents on Improvement of Local Soil Corrosion Environment
- Liu, Qiang
- Effects of the Amount and Introducing time of Emulsifier on the Preparation of Carboxylated Polystyrene Particles
- Liu, Qiong
- Experimental Investigation on Chloride Penetration Properties of Cement-based Materials Containing Graphene Nanoplatelets
- Liu, Quan
- The Overall Design of the Production Line Palletizing Robot
- Liu, Sheng-Chun
- Break Impact Influence Factor of Tension Composite Insulator String
- Liu, Sheng-Pu
- Research on Defects of Hastelloy C-276 Tube Stagger Spinning Process
- Liu, Shi-Jun
- Effect of Binder Content on the Non-linear Creep Properties of Polymer Bonded Explosives
- Liu, Shuang
- Process Mineralogy of Uranium Ore with High Fluorine
- Liu, Shuang
- Synchronous Determination of Copper, Iron, Manganese, Nickel, Cobalt and Arsenic in Bioleaching Solution by ICP-AES
- Liu, Si-Si
- Effect of 0.5PbO-0.5B2O3 Glass Addition on the Microstructure and Electrical Properties of Pb0.87Ba0.1La0.02(Zr0.68Sn0.26Ti0.06)O3 Anti-ferroelectric Ceramics Fabricated by Hot-press Sintering Method
- Liu, T.
- The Effects of oil-gas Lubrication Air Pressure on the Bearing Temperature of Motorized Spindle
- Liu, Tao
- Experimental and Modeling Studies of Engine Rubber Bushing Subjected to Impact Loading
- Liu, Wei-Jian
- Preparation and Surface Modification of Monodisperse Fe3O4 Nanoparticles
- Liu, X.D.
- Effect of Nickel Pre-plating on the Plating of Zn-Ni Alloy Coating on Stainless Steel Substrate
- Liu, X.H.
- Effects of Probiotics Diet Fed Myxcobacteria (JCH-04) on Survival, Growth, Digestive Enzymes Activities and Aquatic Environment in Grass Carp (Ctenopharyngodon idellus)
- Liu, Xi
- Lightning Protection Design for 10kV Composite Distribution Tower
- Liu, Xue-Mei
- Orthogonal Design Hydrogen Peroxide Degradation of Aniline Process
- Liu, Xue-Mei
- Test Preparation Asparagus Total Polysaccharides of Scanning and Standard Curve
- Liu, Yan
- The Influence of Carbon Fiber Heating Wire Spacing on Concrete Pavement Temperature
- Liu, Yan-Ling
- The Application of EMMS Model to Plane Jet
- Liu, Yao
- GaN Films under Different Growth Mechanisms Studied by Synchrotron X-ray Absorption Spectroscopy
- Liu, Yu-Jia
- GaN Films under Different Growth Mechanisms Studied by Synchrotron X-ray Absorption Spectroscopy
- Liu, Yu-Juan
- Design and Test of Laser Transmission Welding System for Automotive Plastic Parts