Proceedings of the 2nd Annual International Conference on Advanced Material Engineering (AME 2016)
900 authors
- Du, Yun-Chen
- Co2+-Exchanged Titanate Nanotubes as a Novel Heterogeneous Catalyst for Peroxymonosulfate Activation and Degradation of Organic Pollutants
- E, Shi-Ju
- Design of Novel Energy Recovery Damper Based on EAP
- Fan, Tie-Lin
- Preparation of Activated Carbon from Waste Penicillin Mycelium
- Fan, Yong-Zhong
- Structure and Mechanical Properties of (CrAl)N and (CrAlSiY)N Coatings Prepared by Asymmetrical Bipolar DC Magnetron Sputtering
- Fang, Fang
- Coating Thickness Controlled by Different Protective Atmospheres for A Hot Dipped 0.7mm Thin Steel Slab
- Fang, Fang
- The Effect of Air Knife Wiping Speed on Galvanized Coating Weight and Thickness
- Fang, Jin-Yue
- Electrical Properties and Photo-response of FETs based on Few-layer WS2 Nanoflakes
- Fang, Jing-Wen
- A Control Method of the Force Loading Electro-hydraulic Servo System Based on BRF
- Fei, Hua
- Reactivity and Kinetic Analysis of Coal Chars Combustion under Oxy-fuel Conditions
- Feng, Jiao
- The Screening of PHB Secretion Strain of PHB Synthesis
- Feng, Wei
- The Austenite Grain Growth Behavior and Mathematical Model of 20CrMnTiH
- Feng, Xiao-Jun
- The Preparation Method of Aluminum-magnesium Alloys
- Feng, Xu
- Preparation of Superhydrophobic ZnO Surface Derived from Wood Template
- Feng, Xu
- Synthesis of Biomorphic Fe2O3 Fibers Derived from Silk Template
- Feng, Yong-Ping
- The Two-scale Asymptotic Expansion for One Class of Thermoelastic Problem in Periodic Composite with Boundary Layer
- Feng, Zhe Chuan
- GaN Films under Different Growth Mechanisms Studied by Synchrotron X-ray Absorption Spectroscopy
- Feng, Zhi-Xin
- Analysis and Solution of the Crack of the Outer Plate of the Door
- Ferguson, Ian T.
- GaN Films under Different Growth Mechanisms Studied by Synchrotron X-ray Absorption Spectroscopy
- Fu, Tiao-Kun
- Preparation and Characterization of Pineapple Leaf Nanocellulose by High Pressure Homogenization
- Fu, Y.S.
- Photodegradation of Reactive Black BL-G by Anatase TiO2-graphene Nanocomposites
- Fujita, Kazuhiro
- Nodal Gap Energy in High-Tc Cuprate Superconductors: A new Paradigm
- Fujita, Kazuhiro
- Doping- and Momentum-Dependent Superconducting Gap of Bilayer Cuprate Bi2Sr2CaCu2O8+ Revealed Using Low-energy ARPES
- Gao, Gui-Long
- Synthesis and Characterization of Photoresponsive Biopolymers Having Spiropyran and Chitosan Groups
- Gao, Hang-Shan
- The Study of Nonlinear Flutter Analysis Method for an Aircraft Full Composite Wing with High-aspect-ratio
- Gao, Hong-Xu
- Effect of Nano Combustion Modifier on Combustion Properties of DB and CMDB-propellant
- Gao, Lin
- Niclosamide Sustained Release Tablets with a Long-term Effect Based on Expanded Graphite
- Gao, Q.H.
- Study on Anti-scaling Performance of Scaling Inhibitor Used during Calcium Scaling Period of Oilwells in ASP Flooding
- Gao, Run-Dong
- Experimental Investigation on Chloride Penetration Properties of Cement-based Materials Containing Graphene Nanoplatelets
- Gao, Shuai
- Investigation of Weldability of Multi-layer Metals by Laser Impact Welding
- Gao, Shuang
- The Screening of PHB Secretion Strain of PHB Synthesis
- Gao, W.
- Oxidation Behavior of TP304H in Water Vapor at 590 °C
- Gao, Zhao
- Design of Novel Energy Recovery Damper Based on EAP
- Gao, Zhao
- Design for the Multi-functional Floating Garbage Disposal Device
- Gao, Zhi-Yuan
- The Same Formation Mechanism of Surface Pits for both a- and c-plane GaN
- Gao,, Yi-Bo
- Finite Element Analysis of Structural Dynamic Testing of Composite Quick-Install Scaffold
- Geng, Y. W.
- Synthesis of Ce/N Co-doped TiO2 Using CTAB Template with Improved Visible-light-driven Photocatalysis
- Gong, S.Q.
- Transparent Conductive Thin Films of Aluminum-doped Zinc Oxide Prepared by Magnetron Sputtering
- Gong, Shan-Shan
- Efficient Preparation of Diuridine P2, P3- (Dihalo) Methylenetetraphosphates
- Gu, Hao-Wei
- An Equivalent Model of Corrugated Structures
- Gu, Jia-Li
- Optimization of a Phosphorus-doped Sol-gel Silica Sol Coating on Cotton Fabrics
- Gu, Su-Yi
- Mechanical Structure Design of Stress-generating System of Low-frequency Mechanical Spectrum Apparatus
- Gu, Yu
- Design and Test of Laser Transmission Welding System for Automotive Plastic Parts
- Guan, Zhi-Xing
- The Austenite Grain Growth Behavior and Mathematical Model of 20CrMnTiH
- Guo, Ce-An
- Performance of Tungsten Alloy Hardened by Electrospark
- Guo, Ce-An
- Isothermal Oxidation Behavior of Electrospark Deposited NiCrAlY Coatings on Gun Steel at 950°C
- Guo, Di
- Co2+-Exchanged Titanate Nanotubes as a Novel Heterogeneous Catalyst for Peroxymonosulfate Activation and Degradation of Organic Pollutants
- Guo, Hong
- Properties and Protein-resistance of Self-assembled Film by Amphiphilic Fluoropolymers
- Guo, Jia
- Study of under Coating Recognition by Pulse Thermography
- Guo, Sheng-Li
- Research on Defects of Hastelloy C-276 Tube Stagger Spinning Process
- Guo, Xian-Zhou
- Application of the Regularization Strategy in Solving Numerical Differentiation for Function with Error
- Guo, Xin
- A CALPHAD Helmholtz Energy Approach to Assess the Thermodynamic and Thermophysical Properties of fcc Ag
- Guo, Xuan
- Detailed Wind Prood Joints Design in Aluminium Standing Seam Metal Roofing System
- Guo, Xuan
- Standing Seam Metal Roofing System Application in the Large-scale Public Buildings
- Guo, Yong-Quan
- Room Temperature Magnetic Transition in NdCo2Ge2
- Guo, Yong-Quan
- Structures and Photoelectric Properties of Ce and Co Doped CuInTe2 Semiconductor
- Guo, Yu-Xiang
- Electrochemical Polymerization and Characterization of Polyaniline/Carbon Nanotube Composite Films
- Haeri, Hadi
- Investigation of Micro Defect on the Shear Crack Growth Properties Using FRANC2D
- Han, Bao-Qin
- Veneer Force and Bridges without Disrupting Traffic Reinforcement Technology
- Han, Chao
- Design of GFRP Engine Mount Frame by Using Topology Optimization
- Han, Feng-Bo
- Crystal Plasticity Finite-Element Simulation of Ti-6Al-4V Alloy with 3D Polycrystalline Models
- Han, Jiang-Yi
- Study the Global Performance Index of Parallel Mechanism
- Han, Lie-Xiang
- Real-time Surveillance System of Mechanical Specific Energy Applied in Drilling Parameters Optimization
- Han, P.D.
- Elastic Constants and Properties of B2-type FeAl and Fe–Cr–Al Alloys from First-Principles Calculations
- Han, Peng-Biao
- Theoretical Study on Influence Factors of the Angle of Inner Hole Generatrix through Cone Hole Open-die Cold Extrusion
- Han, Shan-Qi
- Microstructure and Wear Behavior of in situ TiB2/2024 Composite Fabricated by Spray Deposition Technique
- Han, Wen-Qin
- AE Frequency analysis of Damage Mechanism in CFRP Laminates Based on Hilbert–Huang Transform
- Hao, Jin-Tang
- Lightning Protection Design for 10kV Composite Distribution Tower
- Hao, Rui-Can
- Analysis and Solution of the Crack of the Outer Plate of the Door
- Hao, Xin-Min
- Preparation and Properties of Hemp Stem Powder Reinforced Flexible Polyurethane Foams
- Hao, Yi
- Effect of Different Nanoparticles on Seed Germination and Seedling Growth in Rice
- Hao, Yong-Gang
- Influence of Strain Rate on Dynamic Recrystallization Behaviors of a Near- Titanium Alloy During Isothermal Hot-tensile Deformation:Experimental and Simulative Investigation
- He, Bin
- The Overall Design of the Production Line Palletizing Robot
- He, Feng-Wei
- Preparation and Characterization of Silica Gels Catalysts Containing Undecatungstocobaltoindic Heteropoly Acid
- He, Guan-Song
- Effect of Binder Content on the Non-linear Creep Properties of Polymer Bonded Explosives
- He, He-Ming
- Effects of Laser Cladding on Thermal Tensile Property and Fracture of Gas Turbine Engine Blade Material GH864
- He, Hong
- Effect of Electric Field on Aging Phase Transformation in Al-Zn-Mg-Cu Alloys
- He, Kai
- The Research on RTM Molding Process of Thin-wall Rib Structure of Composite Materials
- He, Ling
- Properties and Protein-resistance of Self-assembled Film by Amphiphilic Fluoropolymers
- He, S.S.
- Risk Assessment of Bisphenol A (BPA) in Thermochromic Textiles
- He, Shi-Hong
- Effects of Laser Cladding on Thermal Tensile Property and Fracture of Gas Turbine Engine Blade Material GH864
- Hong, Xiang
- Effects of Eletro Deposition Process Parameters on the Tribological Properties of Ti (CN) Particles Reinforced Ni-base Alloy Composite Coatings
- Hou, Tian-Qi
- Effect of Different Nanoparticles on Seed Germination and Seedling Growth in Rice
- Hou, Z.F.
- Study on Anti-scaling Performance of Scaling Inhibitor Used during Calcium Scaling Period of Oilwells in ASP Flooding
- Hu, Bo
- Multi-modal Function Optimization of Immune Clone Based on Uniform Design
- Hu, Guang-Hong
- Microcellular Foam Injection Molding Surface Improvement Methods
- Hu, Ming
- Design and Test of Laser Transmission Welding System for Automotive Plastic Parts
- Hu, Peng-He
- Microstructure and Wear Behavior of in situ TiB2/2024 Composite Fabricated by Spray Deposition Technique
- Hu, Yao-Wei
- Experimental and Modeling Studies of Engine Rubber Bushing Subjected to Impact Loading
- Hu, Yue
- Comparative Trial on Biological Contact Oxidation and Bio-filter Process for Wastewater Treatment
- Hu, Zhong-Liang
- Preparation and Surface Modification of Monodisperse Fe3O4 Nanoparticles
- Huang, Bo-Fen
- The Influence of ABS with Different Contents of Butadiene on the Crystallization Behavior of MCPA6/ABS Copolymer Alloys
- Huang, Feng
- Coating Thickness Controlled by Different Protective Atmospheres for A Hot Dipped 0.7mm Thin Steel Slab
- Huang, Gu-Jian
- The Study of Flexural Capacity of Cross Section of Carbon Fiber Reinforced Plastic High Toughness Cementitious Composites
- Huang, Hai-Lan
- Orthogonal Design Hydrogen Peroxide Degradation of Aniline Process
- Huang, Hai-Lan
- Test Preparation Asparagus Total Polysaccharides of Scanning and Standard Curve
- Huang, Hao
- Influence of Loading Quantity on the Properties of Quartz Sand Powder via Mechanical Ball Milling Method
- Huang, Jian-Ping
- Lightning Protection Design for 10kV Composite Distribution Tower
- Huang, Jie
- Preparation and Properties of Hemp Stem Powder Reinforced Flexible Polyurethane Foams
- Huang, Jing-Yun
- Phosphorus Adsorption Desorption Model of River Sediment
- Huang, L.-Y.
- Experimental and Simulative Study on the Hydrodynamics of the Rectangular Otter Board