Proceedings of the 2015 International Conference on Materials, Environmental and Biological Engineering
951 authors
- Qu, Yi
- The High Vacuum Cleaving Passivation Characteristic on 980nm Diode Laser
- Rao, Sihong
- Naphthenic Acid Corrosion of 20G under High Flow Rate Flushing
- Rao, Sixian
- Naphthenic Acid Corrosion of 20G under High Flow Rate Flushing
- Rao, Sixian
- Influence of Turbulence on Naphthenic Acid Corrosion of SA210C
- Rao, Sixian
- Influence of turbulence on Naphthenic Acid Corrosion of A335-P5
- Ren, Shi-ai
- Performance analysis and research of the balance model foam concentrate mix equipment
- Ren, Shuiyun
- Study of Modified Epoxy Resin
- Ren, Xiaolei
- Monte Carlo simulations of corrosion inhibition of copper by two Schiff bases
- Rong, Shoufan
- New Type of Bimetal Composite Casting and Welding Connection Square Hammer
- Rong, Shoufan
- Research of The Excavator Form-Relieved Tooth Texture with The Medium Carbon Medium Alloy Bainite Wear-Resistant Steel
- Rong, Xucheng
- Improvement of Etching Method of Macroscopic Metallographic Examination Based on TRIZ Theory
- Salaiová, Brigita
- Environmentally friendly road asphalt mixtures
- Sang, Rongli
- Size, shape-controlled Synthesis of BaSiF6 nanostructures in a hydrothermal process
- Sha, Yuebing
- Research on certified reference material of benzene in toluene
- Sha, Yuhui
- Strong texture development and magnetostriction in recrystallized Fe81Ga19 thin sheet
- Shan, Ke
- The Activator Optimization of Low-temperature SnBi Lead-free Solder Paste
- Shan, Zenhui
- Research on Non-linear Relationship among Histone Modifications in Yeast Genome
- Shang, Aihua
- Fabrication and application of removing microcystin of CTA-based forward osmosis membrane
- Shang, Qinghui
- Study on Measurement Method of Material Elastic Index
- Shang, Qinghui
- Exploration on Thermal Shock Mechanical Properties of Ceramic Materials
- Shao, Huiping
- Preparation of Oxidation Resistance Coating of Silicide by Pack Cementation
- Shao, Jihai
- High Efficient Removal of Tetracycline from Solution by the Nanoscale Zerovalent Iron
- She, Yulai
- Research on the Formability of Metallic Thin-walled Tube Hydroforming
- Shen, Kaixuan
- The Analysis on Geochemistry of Groundwater in the Coastal Areas of Wanning, the Northeast Hainan Island
- Shen, Wei
- Land Surface Temperature Remote Sensing Inversion of Black Soil Area and Spatial Variation Analysis based on Landsat TM6
- Shen, Xiaomin
- Research on Construction Method of Agricultural Domain Ontology
- Shen, Yuhong
- Study on the Structure and Properties of Novel Bio-based Polyamide56 Fiber Compared with Normal Polyamide Fibers
- Shi, Dali
- Extrusion Pressure Analysis of Powder State Material of Non-Plug Solid Conveying in Feeding Section of Single Screw Extruder
- Shi, Junli
- Environmental Impacts Research for Scroll Compressor Based on Life Cycle Assessment
- Shi, Wen
- Necessity of Combination of Porous Ceramic Filtration and UV Radiation on Marine Bacteria Inactivation
- Song, Cang
- The Influence of Welding Process Parameters on aluminium alloy Multi-pass Welding Residual Stress
- Song, Huijuan
- High Efficient Removal of Tetracycline from Solution by the Nanoscale Zerovalent Iron
- Song, Jiangtong
- Comparison of Fuel Properties between Diesel and Fatty Acid Methyl Ester
- Song, T.Y.
- Study on martensitic transformation, magnetic and compressive properties of spray casting Ni-Mn-Ga alloys
- Song, Tao
- Electrophysiological Recording of Potassium Currents in Hippocampal Neurons
- Song, Xiaobing
- Time Dependent Chloride Diffusion Coefficient in Concrete in Cold Regions
- Song, Xuecheng
- Wear characteristics of a W6Mo5Cr4V2 high speed steel in friction stir welding of AA6061/SiC/55p composite
- Song, Zhenghe
- Lightweight Design of an Axial Flow Roller Based on Sensitivity Analysis
- Su, Lin
- Improvement of self-crosslinking HXNBR by multi-walled carbon nanotubes in latex blending
- Su, Yu
- An experimental investigation on thermal properties of molybdenum disulfide nanofluids
- Sun, Chong
- Synthesis on a type of polycarboxylate superplasticizer under room temprature
- Sun, Chong
- Effect of the initial temperature on the water-reducing performance of polycarboxylate-based superplasticizers
- Sun, Chong
- Study on new viscosity modifying agents
- Sun, Chong
- A new Polyether mixture air-entraining agent
- Sun, Chong
- The Clay-tolerance of Amide-modified Polycarboxylate Superplasticizer and Its Performance with Clay-Bearing Aggregates
- Sun, Dongye
- The Effects of Paddy Soil Fungi Community Functional Diversity Under Organic Fertilizer Management Measures
- Sun, Gangchen
- The model test about silty clay’s deformation as water pressure decreasing
- Sun, Li-da
- The Activator Optimization of Low-temperature SnBi Lead-free Solder Paste
- Sun, Lida
- The Preparation of ITO nano-powder by Arc plasma method
- Sun, Liguo
- Porous WO3 beads fabricated by microfludic device
- Sun, Qingsong
- Research of Dynamic Recrystallization of Ferrite in a Low Carbon Steel
- Sun, S.P.
- Study on martensitic transformation, magnetic and compressive properties of spray casting Ni-Mn-Ga alloys
- Sun, Tiantian
- Study on Measurement Method of Material Elastic Index
- Sun, Tiantian
- Exploration on Thermal Shock Mechanical Properties of Ceramic Materials
- Sun, Wei-hai
- The Crack Tip Fields for Anti-plane Crack in Functionally Graded Piezoelectric Materials with Arbitrarily Gradient Direction
- Sun, Xiaohan
- The model test about silty clay’s deformation as water pressure decreasing
- Sun, Yazhou
- Isotropic and Uniaxial Strain Induced Band Modulation of PbTe
- Tai, Lei
- Theory Research and Practice of Structure Safety Measures and Deformation Prediction in Goaf
- Tan, Pingqing
- Influence of the Types of Stress on Hydrogen Induced Damage By Simulating Hydrogen Diffusion
- Tan, Pingqing
- Mechanism Analysis of Hydrogen Blisters on the Surface of a Gas Tank and Research on Its Preventive Measures
- Tang, Jiao
- Study on Dynamic Response Characteristics of Cu-Zeolite SCR Catalyst based on Kinetic Model
- Tang, Yue
- Research of Factors Affecting Orientation of PAN Precursor used in Carbon Fiber
- Tao, Jianzhong
- Study on Dynamic Response Characteristics of Cu-Zeolite SCR Catalyst based on Kinetic Model
- Tian, Jing
- Solid-Phase Microextraction Fiber Coating for Biological Analysis
- Tian, Jun
- Porous WO3 beads fabricated by microfludic device
- Tian, Xiaoning
- A Soft Template Method to Graphene Oxide Nanosheet/Polypyrrole Nanofibers Hybrid as Supercapacitor Electrode Material
- Tolkushkin, A.
- Plasticity as a Physical-Chemical Process of Deformation of Crystalline Solids
- Tong, Qian
- Research of Dynamic Recrystallization of Ferrite in a Low Carbon Steel
- Tong, Xin
- Mechanical Behaviors Study of Epoxy Resins Reinforced with Nano-SiO2 Particles
- Tong, Yongli
- The assembly dimension control technology of stainless steel pipe and copper fins for thermal shroud
- Tu, Jinchun
- Mesoporous Indium Oxide for Nonenzymatic Uric Acid Sensing
- Tu, Jinchun
- Cuprous Oxide Cubebox for Nonenzymatic Amperometric Hydrogen Peroxide Detection
- Umbetbekov, A.
- Extraction of Oil in Cleaning Oily Waste in Helio Devices Equipped with Concentrating Elements
- Volokitina, I.
- Plasticity as a Physical-Chemical Process of Deformation of Crystalline Solids
- Wan, Li
- Status and Development of Surface Alloying by Electron Beam
- Wang, Ai-qin
- Influence of Quenching Temperature on Microstructure and Properties of Cr5 steel
- Wang, Anming
- Identification of Complex Blocks in the Corner of Underground Chamber
- Wang, Chang
- Evaluating Horizontal Multistage Fracture Well Placement in Low Permeability Reservoir
- Wang, Chao
- Late Cretaceous Sedimentary Evolution Characteristics in Songliao Basin, Northeastern China
- Wang, Chao
- Yaojia-Nenjiang Formation Hydrocarbon Accumulation Characteristics in Songliao Basin, Northeastern China
- Wang, Daowu
- Extraction Salidroside with Aqueous Two-phase System
- Wang, Daowu
- Study on Distribution Behavior in Aqueous Two-phase System about Four Kinds of Alkaloids in Coptis Chinensis
- Wang, Di
- Evaluation of Anticorrosion Performance for Composite Coatings with Polyaniline and Core-Shell Fluorine-containing Polyacrylate Emulsion
- Wang, Fang
- Numerical Simulation of the Release of Alkali Metal during the Combustion of Biomass-fired Boiler
- Wang, Fei
- Interface bonding performance of CuW alloy coating on Cu substrate
- Wang, Feijuan
- Pollution level and source of cyanide in Jiaozhou Bay, eastern China
- Wang, Feijuan
- Vertical distribution and sedimentation of volatile phenols in Jiaozhou Bay
- Wang, Fengwei
- Extraction Salidroside with Aqueous Two-phase System
- Wang, Fengwei
- Study on Distribution Behavior in Aqueous Two-phase System about Four Kinds of Alkaloids in Coptis Chinensis
- Wang, Han
- Environmental Impacts Research for Scroll Compressor Based on Life Cycle Assessment
- Wang, Hehui
- Influence of the Types of Stress on Hydrogen Induced Damage By Simulating Hydrogen Diffusion
- Wang, Hehui
- Mechanism Analysis of Hydrogen Blisters on the Surface of a Gas Tank and Research on Its Preventive Measures
- Wang, Hu
- The influence of contact type of Composite Bridge Deck pavement on stress in pavement interface
- Wang, Huiling
- Experimental Research on Hysteretic Behaviors of Square Tubular T-joint
- Wang, Huiling
- Theory Research and Practice of Structure Safety Measures and Deformation Prediction in Goaf
- Wang, Jianming
- Study on the Structure and Properties of Novel Bio-based Polyamide56 Fiber Compared with Normal Polyamide Fibers
- Wang, Jianwu
- Research on Method of the Heavy Traffic Airport Cement Concrete Pavement Thickness Design
- Wang, Jing
- The Preparation of ITO nano-powder by Arc plasma method
- Wang, Jinwen
- Synthesis on a type of polycarboxylate superplasticizer under room temprature
- Wang, Jinwen
- Effect of the initial temperature on the water-reducing performance of polycarboxylate-based superplasticizers