Proceedings of the 2nd Annual International Conference on Advanced Material Engineering (AME 2016)
900 authors
- Yan, Yin-Zhou
- Numerical Simulation of Temperature Field in Single-crystal Growth by Optical Floating Zone Technique
- Yan, Yong-Jian
- Mechanical Structure Design of Stress-generating System of Low-frequency Mechanical Spectrum Apparatus
- Yan, Zhuo-Zhi
- Programmable Thermocouple Transmitter with Compensation Function
- Yang, Can
- Design of Novel Energy Recovery Damper Based on EAP
- Yang, Chao
- Influence of Loading Quantity on the Properties of Quartz Sand Powder via Mechanical Ball Milling Method
- Yang, Fang
- A Control Method of the Force Loading Electro-hydraulic Servo System Based on BRF
- Yang, Guo
- Experimental Study on Ultra-lightweight Fire-resistive Engineered Cementitious Composite
- Yang, Hai-Rui
- Upon Particle Size and Film Thinness of TiO2 Sensor Prepared by Flame Synthesis
- Yang, Hang
- Growth of Aligned Carbon Nanotubes on Different Metal Substrates
- Yang, Hang
- Electrical Properties and Photo-response of FETs based on Few-layer WS2 Nanoflakes
- Yang, Hao-Lin
- Break Impact Influence Factor of Tension Composite Insulator String
- Yang, Hong
- Mechanical Structure Design of Stress-generating System of Low-frequency Mechanical Spectrum Apparatus
- Yang, Hong-Liang
- Insulation Breakdown Influence Factors and Development of Cross-linked Polyethylene Cable
- Yang, Hong-Liang
- The Electrical Tree of Polyethylene Insulation Study Progress
- Yang, Liu-Qing
- Studies on Adiabatic Shear Bands of Ti6Al4V after Hot Compression
- Yang, Mei
- Analysis of Two Kinds of Chemical Reagents on Improvement of Local Soil Corrosion Environment
- Yang, Ming
- Effect of Ambient Temperature on Solid Motor Grain in Shipboard Multi-launch Container
- Yang, Na
- Experimental and Modeling Studies of Engine Rubber Bushing Subjected to Impact Loading
- Yang, Ping
- Research and Preparation of Mycelium-Soybean Straw Composite Materials
- Yang, Rui-Wen
- Preparation, Hydrolysis and Storage Analysis of Alkaline Protease Microcapsules
- Yang, S.
- Influence of Operational Parameters on Layer-by-layer Assembled Cellulose Derivatives Thin Film
- Yang, S.Y.
- Synthesis of Ce/N Co-doped TiO2 Using CTAB Template with Improved Visible-light-driven Photocatalysis
- Yang, Yan-Jing
- Effect of Nano Combustion Modifier on Combustion Properties of DB and CMDB-propellant
- Yang, Yan-Qing
- Studies on Adiabatic Shear Bands of Ti6Al4V after Hot Compression
- Yang, Yang
- Warning Index System of Multi-emergency Coupling on Cluster Analysis
- Yang, Yong-Zhong
- The Research on RTM Molding Process of Thin-wall Rib Structure of Composite Materials
- Yang, Yu
- Research of Dimensional Accuracy about Shell Case Double Roller Spinning
- Yang, Yu
- The Impact on Dimensional Accuracy of Spinning Products Given by Top End Force
- Yao, L.F.
- Synthesis of Ce/N Co-doped TiO2 Using CTAB Template with Improved Visible-light-driven Photocatalysis
- Yao, Xiao-Lin
- Influences of Stuck Radioactive Sources on Fire Risk of Irradiation Room
- Yao, Xiao-Lin
- Influences of Semi-transverse Ventilation on Smoke Spread Rule of Urban Traffic Link Tunnel
- Yao, Y.H.
- Oxidation Behavior of TP304H in Water Vapor at 590 °C
- Yao, Z.J.
- Elastic Constants and Properties of B2-type FeAl and Fe–Cr–Al Alloys from First-Principles Calculations
- Yao, Zeng-Yu
- Synthesis of Chestnut-Shell-Pigment-Modified Polyacrylamide Superabsorbent Optimized by Response Surface Methodology
- Ye, L.H.
- Dynamic Compressive Properties of 2D-C/SiC Composites under Low Temperature
- Yi, Ya-Nan
- Plasma-graft anhydride on Carbon Fiber and its Effect on Composite Properties
- Ying, Chao
- Preparation and Properties of Hemp Stem Powder Reinforced Flexible Polyurethane Foams
- You, L.
- Application of Recycle Composites on Cold-rolled Ribbed Roller
- You, You-Peng
- Study the Global Performance Index of Parallel Mechanism
- Yu, Hong
- Orthogonal Design Hydrogen Peroxide Degradation of Aniline Process
- Yu, Hong
- Test Preparation Asparagus Total Polysaccharides of Scanning and Standard Curve
- Yu, Hong-Fa
- Influence of Raw Materials Ratio on Properties of New Magnesium Phosphate Cement
- Yu, Kai Yu
- Thermodynamic Phase Numerical Simulation of Torsion Beam based on LS-DYNA
- Yu, Ke-Zhi
- The Application of EMMS Model to Plane Jet
- Yu, Lei
- Ink-Bottle Pore Changes in Cement Concrete Corroded by Environmental Coupling Effect
- Yu, Qi-Kai
- Study the Global Performance Index of Parallel Mechanism
- Yu, Qin-Kun
- Synthesis of Biomorphic Fe2O3 Fibers Derived from Silk Template
- Yu, Yong-Jian
- Effect of Geometric Error of Bearing Parts on the Radial Runout of Rolling Bearing
- Yuan, F.W.
- Effect of Anneal Temperature on Microstructure and Mechanical Properties of 0Cr21Ni6Mn9N cold Drawn Pipe
- Yuan, Hong
- An Equivalent Model of Corrugated Structures
- Yuan, Wen-Jie
- Effects of Powder Characteristics on Rheological Properties of Alumina Slurries
- Yuan, Xiao-Xian
- Highly Efficient Dye-Sensitized Solar Cells based on Carbon Nanofibers Counter Electrodes
- Yuan, Yuan
- Research on Multi-source Traffic Flow Data Fusion Based on Linear Regression: A Case Study in Mega-city
- Yuan, Zhi-Feng
- Effect of Nano Combustion Modifier on Combustion Properties of DB and CMDB-propellant
- Yue, C.
- The Research of Sound Absorption Performance on Micro-Perforated Panel Absorb-er
- Zeng, C.X.
- The Magnetic Control Tunable Characteristics of Localized Modes of One-dimensional Cantor Quasicrystal Structure Containing Nanoparticle Magnetic Fluid
- Zeng, Dan
- Simulation of Heat Radiation for High-power LED Liquid Packaging
- Zeng, X.B.
- Synthesis of Monolayer MoS2 by CVD Approach
- Zeng, Zhi
- The Inspection of Wind Blades Using Thermography with Different Exciting Methods
- Zhai, Peng-Cheng
- Cure-Dependent Viscoelastic Analysis on the Residual Stresses and Distortion Created in Composite Corner during Curing
- Zhan, Lin-Zhong
- High Efficient Co3S4 Supported by Carbon Nanofibers Composite Counter Electrode Catalyst for Dye-sensitized Solar Cells
- Zhan, Xue-Ping
- Break Impact Influence Factor of Tension Composite Insulator String
- Zhang, C.
- The Effects of Dislocations on the Crystal Growth Rate of Silicon --A Molecular Dynamics Study
- Zhang, Cai-Qiong
- Plasma-graft anhydride on Carbon Fiber and its Effect on Composite Properties
- Zhang, Cong-Xiao
- Aptamer Based Microfluidic Chip for Microbial Detection
- Zhang, Guang
- Study of under Coating Recognition by Pulse Thermography
- Zhang, Guang-Zu
- Effect of 0.5PbO-0.5B2O3 Glass Addition on the Microstructure and Electrical Properties of Pb0.87Ba0.1La0.02(Zr0.68Sn0.26Ti0.06)O3 Anti-ferroelectric Ceramics Fabricated by Hot-press Sintering Method
- Zhang, Guo
- Real-time Surveillance System of Mechanical Specific Energy Applied in Drilling Parameters Optimization
- Zhang, Guo-Qing
- Ink-Bottle Pore Changes in Cement Concrete Corroded by Environmental Coupling Effect
- Zhang, Hai
- Upon Particle Size and Film Thinness of TiO2 Sensor Prepared by Flame Synthesis
- Zhang, Hai
- The Application of EMMS Model to Plane Jet
- Zhang, Hai-Ting
- Design for the Multi-functional Floating Garbage Disposal Device
- Zhang, Han-Shan
- Stress Relieve in High Rigidity Metal Component Added Mass by Vibration
- Zhang, Heng
- In Situ Synthesis of TiB2/NiAl Composite
- Zhang, Huan-Xia
- Plasma-graft anhydride on Carbon Fiber and its Effect on Composite Properties
- Zhang, Hui
- Effect of Process Conditions on Interface Properties during Ultrasonic Consolidation Process
- Zhang, Jia-Yang
- Preparation of Thermosetting Polystyrene Insulation Board
- Zhang, Jian
- Isothermal Oxidation Behavior of Electrospark Deposited NiCrAlY Coatings on Gun Steel at 950°C
- Zhang, Jian-Hu
- Effect of Binder Content on the Non-linear Creep Properties of Polymer Bonded Explosives
- Zhang, Jian-Xin
- Synthesis and Electrochemical Performance of Plate-like Structure LiMn0.8Fe0.2PO4/C as a Cathode Material for Lithium Ion Battery
- Zhang, Jiang-Tao
- Cure-Dependent Viscoelastic Analysis on the Residual Stresses and Distortion Created in Composite Corner during Curing
- Zhang, Jiao-Qiang
- Effect of Nano Combustion Modifier on Combustion Properties of DB and CMDB-propellant
- Zhang, Jie
- The Screening of PHB Secretion Strain of PHB Synthesis
- Zhang, Jun-Hao
- Stress Relieve in High Rigidity Metal Component Added Mass by Vibration
- Zhang, Jun-Ran
- The Study of Nonlinear Flutter Analysis Method for an Aircraft Full Composite Wing with High-aspect-ratio
- Zhang, L.
- Study on Anti-scaling Performance of Scaling Inhibitor Used during Calcium Scaling Period of Oilwells in ASP Flooding
- Zhang, L.X.
- The Effects of oil-gas Lubrication Air Pressure on the Bearing Temperature of Motorized Spindle
- Zhang, Lei
- Microstructure and Wear Behavior of in situ TiB2/2024 Composite Fabricated by Spray Deposition Technique
- Zhang, Li-Jie
- Design and Test of Laser Transmission Welding System for Automotive Plastic Parts
- Zhang, Liang-Xing
- High Efficient Co3S4 Supported by Carbon Nanofibers Composite Counter Electrode Catalyst for Dye-sensitized Solar Cells
- Zhang, Mei
- Cure-Dependent Viscoelastic Analysis on the Residual Stresses and Distortion Created in Composite Corner during Curing
- Zhang, Mei-Shuo
- Preparation, Hydrolysis and Storage Analysis of Alkaline Protease Microcapsules
- Zhang, Miao
- Highly Efficient Dye-Sensitized Solar Cells based on Carbon Nanofibers Counter Electrodes
- Zhang, Ming-Hua
- Active LSP based structure for Holographic 3D Video Display
- Zhang, Ning
- The Preparation Method of Aluminum-magnesium Alloys
- Zhang, P.Z.
- Elastic Constants and Properties of B2-type FeAl and Fe–Cr–Al Alloys from First-Principles Calculations
- Zhang, Qiang-Hua
- Flame Retardant Finish of Silk Fabric with Dimethyl Phosphonate Doped Silica Sol
- Zhang, Qiang-Hua
- Optimization of a Phosphorus-doped Sol-gel Silica Sol Coating on Cotton Fabrics
- Zhang, Rui
- Structural Design and Numerical Analysis of Bionic Wheel
- Zhang, Sen
- Growth of Aligned Carbon Nanotubes on Different Metal Substrates