Proceedings of the 2nd International Seminar of Science and Applied Technology (ISSAT 2021)

374 authors
Naufal, Muhammad
Development of Measuring Instrument to Measure and Visualize the Antenna Radiation Patterns as the Teaching Aids for Antenna and Propagation Engineering Practices in Laboratory
Novianti, Syifaa
The Role of Technology and Innovation in Creative Tourism
Novianty, Ira
The Relations of Job Type, Smartphone Usage, Religion, and Financial Institution Product Awareness
Nugroho, Azis Tio
Design and Realization of Parking System Prototype Using RFID Based Microcontroller with Reservation Service via Website for Four-wheel Vehicle
Nugroho, F.A.
Polysulfone Ultrafiltration Membrane for Textile Industry Wastewater Treatment
Nugroho, F.A.
The Influence of Applied Current Density and Agitation Speed During Electrocoagulation of Textile Wastewater
Nurdiansyah, Hanif
Development of Spectral Sensors for Nitrite Content in Edible Bird’s Nest
Nurdin, Muhamad Irfan
The Effect of Topping on Hollow Core Slab Floor Plates on Comfort Criteria Due to Vibration by Human Activities
Nurmansyah, Reyhan Kamil
Analysis of Condition Value and Remaining Life of Idano Mezawa Bridge, Nias District, North Sumatera
Nurmiati, Siti
Literature Review of E-Learning Since 2015 - 2020
Nuryana, Irwan
Flexural and Vibration Performance Analysis of Autoclaved Aerated Concrete (AAC) Slab
Oesman, Mardiana
Flexural Strengthening Reinforced Concrete Beams Subjected to Flexural Damage with CFRP
Oesman, Mardiana
The Behavior of Low Strength Concrete Beams Reinforced with Carbon Fibre Reinforced Polymer Under Cyclic Loading
Oesman, Mardiana
Flexural and Vibration Performance Analysis of Autoclaved Aerated Concrete (AAC) Slab
Oesman, Mardiana
The Behavior of Low -Strength Reinforced Concrete Column Strengthened with Carbon Fiber Reinforced Polymer Subjected to Cyclic Lateral Load
Oesman, Mardiana
The Effect of Topping on Hollow Core Slab Floor Plates on Comfort Criteria Due to Vibration by Human Activities
Paramitha, Tifa
Canteen Wastewater Treatment by the Activated Sludge added Bioballs
Pasek, Ari Darmawan
Investigation on the Interaction of Lignocellulose and Starch-Based Wastes in Wet Torrefaction Process
Pasra, Nurmiati
Analysis of Maximum Power Point Tracking (MPPT)
Permatasari, Vira Indah
The Effect of Financial Literacy and Financial Technology on MSME Profits
Persada, Tiara Septiany
Bandwidth Enhancement of the Rectangular Patch Antenna Using Artificial Dielectric and Proximity Coupled Line Feed
Piash, Jahidul Hossain
Design of an Absorber Plate for Solar Air Dryer Using Nickel Oxide Nano Particle Coating
Prabowo, B.H.
The Influence of Applied Current Density and Agitation Speed During Electrocoagulation of Textile Wastewater
Pradana, Aridi Wijaya
Flexural Strengthening Reinforced Concrete Beams Subjected to Flexural Damage with CFRP
Prajudi, R
Analysis of Soft Soil Shear Strength on Slopes Stabilized Using Volcanic Ash and Phosphoric Acid
Pramono, Sabar
Health Card for Teenager Based on Near Field Communication and IoT using Sensor Fusion Method
Prasetya, Budi
Marketing Network System Analysis of Relief Craft MSMEs
Prasetyo
Numerical Study of the Cone Angle Effect on Conical Basin Gravitational Water Vortex Turbine
Pratama, Defrianto
Experiments for Determining the Thermal Conductivity of Brass and 304 Stainless Steel with Direct Temperature Measurement Techniques Using Lorenz Number as Validation
Pratama, Raksa Reza
Development of Measuring Instrument to Measure and Visualize the Antenna Radiation Patterns as the Teaching Aids for Antenna and Propagation Engineering Practices in Laboratory
Pratikto
PLC Based Remote Accessible Refrigeration Training Unit
Pratiwi, Eka
Comparison of the Performance of Two Circular Patch Antennas Made from Taconic RF- 60A Substrate with and without Artificial Dielectric Using Simulation Approach
Prawisudha, Pandji
Investigation on the Interaction of Lignocellulose and Starch-Based Wastes in Wet Torrefaction Process
Prihandini, Ghusrina
The Development of Coffee Bean Drying Process Technology – A Review
Primajati, Gilang
Comparison of Accuracy and Predictive Results of ES-Holt Method and ANN-Back Propagation Method: Case Study of Number of Tourists
Pudin, Apip
Biopolymer as Environmentally Friendly Reinforcement to Overcome Cracked Soil Problems on Expansive Soil:
Purbayati, Radia
Millennials’ Intention Towards Syariah Card: The Roles of the Theory of Planned Behavior and Product Knowledge
Purnama, Hari
Effect of Distributed Generation Based on Synchronous Generator on Fuse Recloser Protection Coordination in Medium Voltage Network
Purnomo, Ilham
Efforts to Repair Groundsill Bantar River Progo Special Region of Yogyakarta Indonesia
Putri, Ghania Yuntafa
Comparison of the Performance of Two Circular Patch Antennas Made from Taconic RF- 60A Substrate with and without Artificial Dielectric Using Simulation Approach
Putri, Kiran Aulia
Play & Fun Portal to Support “Steam” Learning Method in Early Childhood
Qamaruddin, Naufal
Implementation of Adaptive Neuro-Fuzzy Inference System Control on Pneumatic Solar Tracker
Qudriyah, Haqqi Lailatul
An Analysis of Sustainable Finance Disclosure at Indonesian Sharia Commercial Banks using POJK 51/POJK.03/2017
Rafdinal, Wahyu
The Role of Technology and Innovation in Creative Tourism
Rafdinal, Wahyu
Esports: An Empirical Study of Factors Affecting Continuance Intention
Raharjo, Agoeng Harjatmo
Initial pH Influence on Organic Pollutants, Total Suspended Solids, and Nickel Removal from Citarum River Water Using Electrocoagulation
Rahmawati, Yuliana Nur
The Characteristic of a 3.5 GHz Circular Patch Antenna Using Open-Ring Artificial Dielectric
Raji, Luqman
Using Feasibility Index Model to Investigate Human Thermal Comfort Under Weather Data of Mubi, Adamawa State, Nigeria
Ramadhan, Gilang
Antecedents and Consequences of Organizational Innovation: Study on Small and Medium Enterprises in the Consumer Goods Industry
Ramadhani, Laily Isna
Comparison Between Sequencing Batch Reactors (SBR) and Stirred Tank Reactors (STR) in Handling Hydraulic Shock Loads
Ramdhani, Afdhal Lazuardiansyah
Response of Cable-Stayed Bridge Under Ground Motions
Razali, Sazalinsyah
Literature Review of E-Learning Since 2015 - 2020
Rezeki, Pamella M Sri
The Reinforcement of Flexible Composite Beams Laminated Camphor – Reinforced Concrete
Rifa’i, Awaludin Fitroh
Canteen Wastewater Treatment by the Activated Sludge added Bioballs
Riniati
The Effect of Organic Acids Concentration Extracted from the Fruit on the Conversion of Starch to Glucose Using Microwave-Assisted Acid Hydrolysis (MAAH)
Riniati
Preparation and Characterizations of NiYSZ-based Anode for Solid Oxide Fuel Cells and Solid Oxide Electrolyser Cells
Roskha, Piona
Play & Fun Portal to Support “Steam” Learning Method in Early Childhood
Rufaedah, Yanti
The Effect of Employee Competence, Leadership Commitment, and Internal Audit Role on the Quality of State Property Accounting Information
Rustawa, Nita Widia Khairinnisa
Material Protection for Citarum River-Bed by Local Scour used What-If Analysis
Said, Mohd Farid Muhamad
Conversion of Crude Hevea brasiliensis Oil to Biodiesel Utilizing Perna viridis Waste Shells as Solid Catalysts
Saki, Md. Ektiyer
Design and Development of a Small-Capacity Tesla Turbine for Rural Applications
Sakib, An Najmus
Design and Analysis of a Solar Dryer for the Rural Areas of Bangladesh
Salsabila, Adira
Position Coordination Aid for Blind Persons Based on LoRa Point to Point
Santoso, Ari Fajar
Framework for Measuring Readiness of Satu Data Indonesia (SDI) Implementation
Santoso, Jessy Nasyta Putri
Flood Detection System Using Ultrasonic Sensor with Fuzzy Logic Method
Saputra, Fiter Yogie
Health Card for Teenager Based on Near Field Communication and IoT using Sensor Fusion Method
Saputri, Lilezha
Understanding Offline Shopping Intentions During Pandemic
Sardjito
Comparison of Newton Correction Between Joule’s Law Experiment and Ice Heat of Fusion Experiment
Sardjito
Temperature Dependence on Distance from Heat Source Objects
Sardjito
The Relationship Between Measurable Temperature by Infrared Thermometer with the Distance to Heat Source
Sardjito
The Characteristic of a 3.5 GHz Circular Patch Antenna Using Open-Ring Artificial Dielectric
Sardjito
Comparison of the Performance of Two Circular Patch Antennas Made from Taconic RF- 60A Substrate with and without Artificial Dielectric Using Simulation Approach
Sartika, Euis
Application of the Geographically Weighted Regression (GWR) with the Bi-Square Weighting Function on the Poverty Model in the City/Regency of West Java
Sartika, Euis
Determination of the Fastest Path on Logistics Distribution by Using Dijkstra Algorithm
Sarwar, Ishrak
A Computational Model for Performance Optimization of a Stepped Solar Still
Sarwar, Ishrak
Design of an Absorber Plate for Solar Air Dryer Using Nickel Oxide Nano Particle Coating
Semiawan, Transmissia
Analysis of the Effectiveness and Efficiency of Software Development Tools
Senalasari, Widi
A New Strategy Approach to Sustainable Tourism Development: Moving Beyond from Pandemic Outbreak Through Tourism Technology
Setiadi, Budi
Position Coordination Aid for Blind Persons Based on LoRa Point to Point
Setiadi, Budi
Implementation of Adaptive Neuro-Fuzzy Inference System Control on Pneumatic Solar Tracker
Setiadi, Harry
Modification of the Single-Phase AC Induction Motor to the Low-Speed Single-Phase AC Permanent Magnet Generator
Setiawan, Adi
The Behavior of Low Strength Concrete Beams Reinforced with Carbon Fibre Reinforced Polymer Under Cyclic Loading
Setiawati, Lina
Tourist Motivation and Satisfaction Towards Hot Springs Destination
Setiawati, Lina
A New Strategy Approach to Sustainable Tourism Development: Moving Beyond from Pandemic Outbreak Through Tourism Technology
Setiawati, Lina
Factor Analysis of Hot Springs Tourist Motivation
Setyowati, Tri
Antecedents and Consequences of Organizational Innovation: Study on Small and Medium Enterprises in the Consumer Goods Industry
Shoelarta, S.
Preparation and Characterizations of NiYSZ-based Anode for Solid Oxide Fuel Cells and Solid Oxide Electrolyser Cells
Sholehah, Syifa Alfina
Study of Control Well to Prevent Landslides Risk During Construction of Cisumdawu Toll Road
Sihombing, Pardomuan Robinson
Comparison of Accuracy and Predictive Results of ES-Holt Method and ANN-Back Propagation Method: Case Study of Number of Tourists
Simanjuntak, Asep Barnas
Development of Measuring Instrument to Measure and Visualize the Antenna Radiation Patterns as the Teaching Aids for Antenna and Propagation Engineering Practices in Laboratory
Sirri, Ahmad
The Relations of Job Type, Smartphone Usage, Religion, and Financial Institution Product Awareness
Slameto
Investigation of the Utilization of Kaplan Turbines for PLTMH Power Plants
Soeswanto, Bambang
The Development of Coffee Bean Drying Process Technology – A Review
Sofian
Loyalty Towards Islamic Microfinance: The Roles of Perception, Expectation, and Trust
Sofyan, Y.
Preparation and Characterizations of NiYSZ-based Anode for Solid Oxide Fuel Cells and Solid Oxide Electrolyser Cells
Solihin, Ridwan
Position Coordination Aid for Blind Persons Based on LoRa Point to Point
Sosianika, Adila
Exploring Social Entrepreneurship in the Community Affected by the Jatigede Reservoir Infrastructure Development Project
Sriyono, Edy
Efforts to Repair Groundsill Bantar River Progo Special Region of Yogyakarta Indonesia
Suciyani, Wida Oktavia
The Effect of Employee Competence, Leadership Commitment, and Internal Audit Role on the Quality of State Property Accounting Information
Sudarman, Robby
Canteen Wastewater Treatment by the Activated Sludge added Bioballs