Proceedings of the 2015 International Conference on Power Electronics and Energy Engineering

329 authors
Bai, W.L.
The internal stress analysis method of cement paste under core restricted conditions
Cai, Y.Z.
Intelligent management system of vehicle violation based on electronic license
Cai, Z.Y.
Intelligent management system of vehicle violation based on electronic license
Cai, Y.H.
Simple synthesis for hierarchical SiO2 tubes with adjustable Mesoporous
Cai, Z.Y.
An energy consumption model of mobile terminal software based on BP neural network
Cai, Z.Y.
A fuzzy trust evaluation model in mobile commerce
Cao, H.C.
Analysis of losses in high speed slotless PM synchronous motor integrated the added leakage inductance
Cao, J.D.
Electrical power management for distributed automotive system
Chen, S.
Stability constraints of the transmission capacity about VSC-HVDC system supply to the passive network
Chen, Z.G.
Electric power steering system for agricultural truck matching design
Chen, Y.Q.
High precision work station research
Chen, S.M.
Investigation of negative influences on ride comfort performance of In-wheel motor vehicles with high Unsprung Mass
Chen, X.
Novel 0.1 Hz exponential wave generator based on semiconductor switch
Chen, X.M.
Comparative study on mechanical properties of V-shaped insulator string under fluctuating and calm wind
Chen, T.
Study on fire extinguishing performance of superfine powder fire extinguishing agent in a cup burner
Chen, S.J.
Lagrange multiplying method based calculation of material flaw thickness Exploiting ultrasonic multipath detection
Chen, P.Y.
Design and realization of temperature measurement system based on PROTEUS software
Chen, C.W.
Research on the strategy of group vehicle intelligent perception and traffic route guidance of semantic car road network
Chen, W.D.
Face recognition based on Gabor wavelet transform and modular 2DPCA
Chen, J.
A fuzzy trust evaluation model in mobile commerce
Chen, H.
A method of public policy refinement based on OWL and linear temporal logic
Cheng, X.M.
High precision work station research
Chu, C.
Gefitinib, as a new stent coating material, specifically inhibits smooth muscle cells proliferation through inhibition of EGFR/Akt pathway phosphorylation
Cui, W.H.
Research and development of the tension pay-off equipment for wire rope maintenance
Deng, X.Z.
Research of HTS application on tokamak magnets
Deng, Y.
Simple synthesis for hierarchical SiO2 tubes with adjustable Mesoporous
Ding, S.F.
The design of rice direct seeding machine
Ding, X.M.
Study on aerodynamic performance of offshore wind turbine with floating platform motion
Ding, S.X.
Convex-concave property for parabola fitting of Dr. Bridge
Ding, J.S.
Study of the numerical parameter optimization method based on Nano-indentation process
Dong, N.
Transient elastohydrodynamic lubrication analysis of spur gear running-in considering effects of solid particles
Dong, L.J.
Research and application of fuzzy control with multiple weighted factors by genetic algorithm
Dong, X.X.
A study on solving the nonlinear seepage flow model of three-region composite reservoir
Dong, X.X.
A study on solving the linear seepage flow model with r
Du, F.
Matching research between engine and transmission of vehicle based on AVL-Cruise
Du, S.D.
A novel method for 3D morphing by deformation matrix with triangle meshes
Fan, H.C.
High precision work station research
Fan, P.
A kind of research on regenerative braking algorithm of hybrid electric vehicle
Fan, T.L.
Analysis on tectonic style and forming mechanism of the Cambrian system in the central uplift belt, Tarim basin
Feng, L.
Research of wind power prediction based on the auto-regressive model
Feng, F.
A visualization experimental study of icing on blade for VAWT by wind tunnel test
Feng, Y.J.
Study and practice on teaching system reform of engineering graphics based on training engineering consciousness
Fu, C.
Research and development of the tension pay-off equipment for wire rope maintenance
Fu, X.C.
Study on fire extinguishing performance of superfine powder fire extinguishing agent in a cup burner
Gan, H.G.
Convex-concave property for parabola fitting of Dr. Bridge
Gao, G.W.
The analysis on the influence factors and tendency of power regulation in China
Gao, Q.
A kind of research on regenerative braking algorithm of hybrid electric vehicle
Gao, C.
Electrical retail tariff model based on the load characteristics
Gong, K.Q.
Research and development of the tension pay-off equipment for wire rope maintenance
Gu, F.
Experimental investigating effect of reprocessing on properties of composites based on recycled polypropylene
Guan, Z.W.
Matching research between engine and transmission of vehicle based on AVL-Cruise
Gui, D.D.
A study on solving the nonlinear seepage flow model of three-region composite reservoir
Gui, D.D.
A study on solving the linear seepage flow model with r
Guo, Q.
The analysis on the influence factors and tendency of power regulation in China
Guo, J.M.
Development of VLF test system for power cables
Guo, H.
Failure analysis and diagnosis of spark erosion machine tools
Guo, X.B.
Designing a refrigeration and heat-removal system for rapid detector based on freezing point
Guo, J.Q.
Dynamic analysis of aerial work platform working device based on virtual prototype
Guo, H.
TFT substrate glass geometrical parameter measurement and data processing
Guo, Y.H.
Properties of SnAgCu solders bearing Al nanoparticles
Guo, Z.M.
Preparation of HA/TiO2 biological coating on titanium alloy
Hall, P.
Experimental investigating effect of reprocessing on properties of composites based on recycled polypropylene
Han, Q.
A method for composite wing box optimization with manufacturing constraints
Hou, Z.
Novel 0.1 Hz exponential wave generator based on semiconductor switch
Hu, K.T.
A novel high water-resistant aqueous acrylate emulsion, part 1: preparation and characterization
Hu, R.F.
A kind of research on regenerative braking algorithm of hybrid electric vehicle
Hu, C.
Study on fire extinguishing performance of superfine powder fire extinguishing agent in a cup burner
Hu, H.L.
Design and realization of temperature measurement system based on PROTEUS software
Hu, R.F.
Research on the strategy of group vehicle intelligent perception and traffic route guidance of semantic car road network
Hu, Y.
Stochastic economic dispatch using bacterial swarm algorithm
Hua, J.S.
Effect of accumulated strain on the microstructure and properties of TC4 alloy prepared by continuous various cross-section recycled extrusion
Huang, C.X.
Development of VLF test system for power cables
Huang, F.
Development of VLF test system for power cables
Huang, H.
Research of wind power prediction based on the auto-regressive model
Huang, X.B.
Transient elastohydrodynamic lubrication analysis of spur gear running-in considering effects of solid particles
Huang, L.J.
Research on precision forging blade TENON processing technology
Huang, L.
The suppression of Narrow band jammers algorithm and the implementation of Beidou B3 signal
Huang, Q.
The design of rice direct seeding machine
Huang, H.T.
Electrical retail tariff model based on the load characteristics
Huang, J.J.
Comparative study on mechanical properties of V-shaped insulator string under fluctuating and calm wind
Huang, J.
Convex-concave property for parabola fitting of Dr. Bridge
Huang, X.X.
Polypyrrole/sisal fiber composites for energy storage
Huang, S.
Effect of synthesis conditions on the growth of ZnO nanorods via the solution deposition method
Huang, Q.Q.
The research of numerical simulation about the improved dense medium cyclone
Huang, S.B.
A method of public policy refinement based on OWL and linear temporal logic
Huo, B.R.
Flexural behavior of reinforced concrete beams strengthened with bfrp bars
Ji, S.C.
Novel 0.1 Hz exponential wave generator based on semiconductor switch
Jia, J.G.
Dynamic analysis of aerial work platform working device based on virtual prototype
Jiang, W.
Study on the comprehension difference between managers and front-line employees
Jin, X.
Study on modeling method of the precision machined surface geometry form error based on Bi-cubic B-spline
Jin, P.
A method for composite wing box optimization with manufacturing constraints
Jing, L.S.
Study on fire extinguishing performance of superfine powder fire extinguishing agent in a cup burner
Kou, B.Q.
Analysis of losses in high speed slotless PM synchronous motor integrated the added leakage inductance
Kou, M.
Research on precision forging blade TENON processing technology
Lai, C.
TEM investigation on ceramic strengthening NiAl-based composite prepared by thermal explosion and hot extrusion
Lang, D.P.
A method of public policy refinement based on OWL and linear temporal logic
Leng, J.
Designing a refrigeration and heat-removal system for rapid detector based on freezing point
Li, Y.P.
Self-cycling modularized smart grid application integration
Li, Z.X.
Droop control of parallel dual-mode inverters used in micro grid
Li, H.J.
Development of VLF test system for power cables