Search all articles

Background. Based on health research in 2007 found that infections were the cause of death of newborn number 3 (12%). Diagnosis Early-Onset neonatal sepsis (EO) was not easy to get prove of kind of microorganism, if only based on clinical symtomps due to systemic respons. Objective. Knowing the type...

The participation and community involvement in solving health problems is needed. One of the health problems facing is malnutrition. In Indonesia, Posyandu is an Integrated Health Service Point that are organized from, by, and for the community. Posyandu activities run by cadre, the trained community...

Self-directed learning (SDL) emphasized the students to be responsible in their learning process. SDL capabilities need to be owned by physicians, so physicians will be able to face the continuous scientific changes and they can develop the lifelong learning capabilities. This study aimed to explore...

Dengue Hemorrhagic Fever (DHF) remains as one of major public health problems in Indonesia. During the years, Jakarta has become the province with high number of DHF cases. To reduce the cases, DHF prevention initiative can be done through health education. The objective of this study was to assess the...

Every work place has its specific risk of accident which can be the main problem for some companies. One of the solution to minimize those outcome is by implementing the safety and health promotion program. These program can control the unsafe act of the worker and the unsafe condition of the work place...

Risk assessment is one of the activities conducted by PT X to apply Occupational Safety and Health (OSH) in the company. Risk assessment in PT X aims to identify potential hazard factors present in the workplace, assess hazard risk from hazard factors, determine control measures against existing hazards,...

During antenatal care services in Ciputat Timur Health Center, midwives have difficulties of time management services especially for conducting counseling and pregnant women often could not get laboratory test. The impact of that, the pregnant women could not get the antenatal care services according...

Occupational Safety and Health Promotion is an attempt that created by PT. X to apply Occupational Safety and Health in the company. Implementation is mandatory to provide information related to occupational safety and health and work facilities to be conducive to safety and health in work. Occupational...

Oxidative stress plays pivotal roles in heightening the pathology of diabetic nephropathy. Widely known free radical scavenger, edaravone (3-methyl-1-phenyl-2-pyrazoline-5-one), has been proven to give benefits in cardiovascular and brain diseases by attenuating oxidative stress. Additionally, whether...

Recovery process is strongly believed to be significant in improving athletes' performance during and after training. One of the recovery process is physiotherapeutic. It uses cooling vests. The existing cooling vests around are made of materials such as anti-bacterial treatment, 50% nylon jersey, 50%...

For large data environment, the traditional K-means clustering algorithm flaw in the software in real-time fault detection process, we propose a K-means clustering software intelligent real-time fault detection method is improved. The K-means clustering algorithm and particle swarm optimization combined...

The previous experiments have shown that hydrophobic properties of 20 kinds of human’s amino acid are different. It was of great significance to study whether hydrophobicity of proteins had a role in the research of the intimate relationship of proteins. Besides, it is also very important to balance...

Linear instability theory can evaluate the beginnings of instability in a liquid sheet. It provides a good starting point for predicting unstable, wave-type behavior in a liquid sheet with disturbances. An existing linear instability analysis method was used to investigate the breakup of a conical sheet...

The basic process of air flapper valve was analyzed and the mass flow rate model of air flapper valve was established. The loss of flow through the air valve was considered. The opening process of the flapper was modeled with a non-viscous model, and the closing process was modeled with a viscous one....

Substitution box (S-box) is an important nonlinear component in block cipher algorithms. Evaluating the cryptographic properties of an S-box requires attention to criteria such as nonlinearity, differential properties, and diffusion properties. In this paper, Artificial Bee Colony algorithm was introduced...

Physiological signals are external manifestations of emotions. Mood swings can be expressed by the change of physiological signals. Because these performances are not controlled by the individual subjective consciousness, the conclusions are more objective and true. The method based on the statistical...

In order to looking for the fault of rock drilling hydraulic pump, the data of pressure and flow can be collected, from which wavelet analysis was used to find characters of the fault. So a new rock drilling pump fault diagnostic model by SVM was based on the energy value of the data deal with wavelet...

In the buffer solution of pH=5.80, bilirubin can remarkably reduce the fluorescence intensity of the enoxacine - terbium (Tb3+) complex at =545nm and the reduced fluorescence intensity of Tb3+ ion is in proportion to the concentration of bilirubin. The influential factors were investigated. The reducement...

Blind channel estimation for MIMO-OFDM systems was discussed, and a subspace based blind channel estimation algorithm by re-constructing the received signal and its simplified one were proposed. The algorithm changed the channel matrix of the transfer function into a block Toeplitz high matrix exploiting...

Online learning is a learning way to use online education platform for learners. It could let the learners start learning at anytime from anywhere by removing the traditional education's time and space limit. As the online learning style becomes more and more popular, its main base environment has gradually...

Using WDM technology to solve the problem of the reuse addressing the fiber grating sensing network, the system USES a reference grating for temperature compensation, the reference grating was put in the same temperature field as the measuring grating array, but does not suffer the effect of strain,...

Reflective spectrum of sampled grating was analyzed using transfer matrix method. Dispersion compensator was designed by selecting the length of sampled grating, sampled period, sampled rate, chirp coefficient and some kind of appropriate parameters. In multi-channel dispersion compensation simulation...

In order to solve the contradiction between real-time and accuracy of collision detection in virtual battlefield, we divided the terrain into three types according to its average curvatureand different matching algorithms were used in different types of terrain. In virtual battlefield, collision detection...

Materials and the related manufacturing industry involve every area of the economy, and the corresponding talent demand ranks in the forefront of all industry professionals. However, the defects of current talent training mode and curriculum system limit the quality of talent training. In this paper,...

Several different Li+-imprinted gels were prepared by different precursors. And the gels were characterized by textual properties and point of zero charges (PZCs). The adsorption of Li+ from their aqueous solutions by the gels was investigated. The surface areas of the gels were found to range from 60...

To transmit data reliably and effectively in deep space network, a protocol called NCSTP was proposed, introducing network coding mechanism into space communication. However, the NCSTP cannot make an effective response to the burst packet loss characteristic in InterPlaNetary (IPN) network. Therefore,...

This paper researches the integrated optimization of flexible job shop scheduling problem (FJSP) and equipment maintenance plan. The object of the integrated optimization model is to pursue the minimum of makespan. The paper proposed a two-stage algorithm based on the genetic algorithm to solve the problem....

We investigated the effect of lactoalbumin on the processing properties of vulcanized rubber by adding lactoalbumin protein. We found that G’ and G’’ of vulcanized rubber were increased and tan was decreased by adding lactoalbumin. The addition of lactoalbumin can improve the processing properties of...

Ammonia and HTT were compounded and tested as a novel preservative system for concentrated natural rubber latex (CNRL) to replace traditional preservatives. The preservation effects and the viscosity of prevulcanized CNRL were measured. After preservation treatment, the drying characteristics, the mechanical...

With the wide application of the autonomous ground vehicles (AGVs) in the military and civilian areas, the autonomy requirements such as autonomous self-awareness, self-planning and self-control are increasingly considered. The autonomy evaluation has been one of the key issues in the research of the...

At presently the most widely used algorithm is collaborative filtering in the Personalized Recommendation Systems for E-Commerce. Aiming at the problem that the recommendation is not accurate due to the data sparsity, a collaborative filtering algorithm based on user characteristics and item attributes...

In this paper, the author discussed the current popular the grid computation technique and the virtualization technology, analyzed and concluded characteristic of two technologies. Then, VNET has been proposed, which can add the virtual machine to the network efficiently. It can dynamically modify its...

In this work, the ground-based GPS data in the West of Taiwan Strait was used to remote sense atmospheric Precipitation Water Vapor (PWV) in Fujian, and dynamically analyzed the spatial pattern change characteristics of PWV, combined with meteorological data, in order to quantitatively analysis the relationship...

This paper investigates the microstructure and friction-wear behaviour of Scapharca subcrenata in order to obtain useful information regarding the tribological properties of composite materials. The experimental results have showed that the relationship between the friction rate and surface roughness...

This paper investigated the microstructure and composition of Argopecten irradians through X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and energy spectrometer (EDS), and measured the hardness and tribological properties of Argopecten irradians using nanoindentation and...

As a solid state joining process, friction stir spot welding (FSSW) has a strong potential to be applied in the aerospace and automotive industries. Mechanical property of the FSSW joint takes important influence on connection performance. In the present paper, numerical simulation model of mechanical...

The present study reports that a modified coaxial electrospinning process, which was successfully carried out to control the diameters of shellac fibers. With a Triton-X100 in ethanol as sheath working solution and shellac ethanol solution as a core electrospinnable fluid, the coaxial electrospinning...

The virtual prototype of circular vibrating screen was Established, and the overall structure and working principle of the device were described in detail.The natural frequency of circular vibrating screen was obtained by using finite element analysis software ANSYS to modal analysis,which can provide...

Epoxy/graphene nanoplatelets(EP/GNs) composite was prepared by ball milling(BM), using diglycidyl ether of bisphenol A(DGEBA)as matrix, Diethyltoluene diamine(DETDA) as curing agent, GNs as thermal conductive filler. The mechanisms and influence of different BM time to exfoliate layered GNs and compound...

Start-up mark is an important factor leading to woven defects. The reasons of start-up marks were discussed. At present, cloth fell displacement is a main factor to produce start-up marks for a loom. The relationship between cloth fell displacement and its influence factors were studied. Intelligent...

Volatile phenols are a class of protoplasmic toxicants which have caused inevitable environmental problems in many sea areas. This paper analyzed the content, pollution level and distribution of volatile phenol in bottom waters Jiaozhou Bay in May, September and October 1983. Results showed volatile...

This paper analyzed the contents, distributions and pollution sources of As in Jiaozhou Bay waters in 1983. Results showed As contents ranged from 0.19-4.89 g L-1,in the whole year, and were lower than Class I for As (20.00 g L-1) in National Standard of China for Seawater Quality (GB3097-1997). There...

As to solve the issues of insufficient training data and initial parameters sensitive in existing protocol anomaly detection based on hidden Markov model, presenting a new protocol anomaly detection method based on improved genetic algorithm and hidden Markov model. First, the local competitive selection...

This paper presents a terrain rendering technique for large, textured terrain, which uses Parallel-based error metric. In a preprocess, the domain was first tiled and computed into a nested geometric space error map based on geographic theory, taking the advantage to save displaying memory with terrain...

For solving effect and real-time performance problems of lunar surface image, the paper proposed an eliminating brightness differences algorithm of lunar surface image by correlation of color components fitting gray level map function. Feature points were obtained by matching in process image, which...

With the reform and development of teaching, teaching quality has become the main focus of the various colleges and universities teaching problems. To improve the teaching quality of teachers, improve the teaching ways and methods, this paper studied, by means of participating in teachers' information...

This paper analyzed the content and distribution of Arsenic (As) in bottom waters in the bay mouth of Jiaozhou Bay in May, September and October 1983. Results showed As contents ranged from 0.15-2.30 g L-1 in bottom waters in the whole year, and were more lower than Class I for As (20.00 g L-1) in National...

Based on the investigation data on Cu contents in different seasons in 1983 in surface waters in Jiaozhou Bay, we analyzed the contents, pollution level and distributions of Cu. Results showed that Cu contents in May, September and October were 2.47-20.60 g L-1, 0.86-4.86 g L-1 and 0.77-3.00 g L-1, respectively....

Appraisal model of estate market comparison approach existed uncertain problem, so a new appraisal model integration of GIS and set pair analysis was built. Firstly, using the GIS spatial analysis method quantified the real estate price impact factors. Then, its weights were calculated by entropy weight...

Perovskite-type cube structure LaMnO3 nanofibers of approximately 50~100 nm in diameter were synthesized via Sol-Gel processing and electrospinning technology after calcined at 900 by using polyvinypyrrolidone (10 wt %PVP) as complexing agents. The nanofibers was characterized by means of scanning electron...