Search all articles

Based on the teaching requirement of learning at home during the epidemic period, on the basis of fully excavating the existing resources, this paper analyzes the demand characteristics of House Architecture course for real estate economics speciality, and constructs multiple teaching methods, such as...

Through the analysis of the problem of drinking and driving, and through the chamber model, it is concluded that if you drink three bottles of beer in a relatively short period of time, the alcohol content in your blood will reach the maximum after 1.2496 h, and it will be in line with the national standard...

Transcranial Magnetic Stimulation (TMS) for post-stroke patients has been shown to improve motor function in a short period, but no one has yet investigated how post-stroke rehabilitation will provide an optimal effect after additional patient Home Rehabilitation Programs (HRP) is applied. The objective...

A small four-rotor UAV transmission line inspection system is designed, which not only can cruise and avoid obstacles automatically, but also can be controlled with the remote. The system carries out data collection of transmission lines by the camera module, makes use of FPV technology to realize the...

In this paper, we address the problem of generating high-resolution (HR) image from a single low-resolution (LR) image, which is called image super-resolution (SR). Recently learning-based SR with sparse coding (SC), locality-constraint linear coding (LLC) and so on has been explored, and achieve acceptable...

The current transmission line is constantly improved and updated, in order to save space, a lot of back and multi-line double back. Power lines during the operation induced voltage is very large, you must mount the ground. Ground wire must be multi-strand copper wire, whose cross-sectional area of not...

Compared to other ASEAN countries, Indonesia has the most significant number of accounting students and accounting graduates. However, this number is not in line with the number of professional accountants. Indonesia is in number five below Thailand, Malaysia, Singapore and Philippines. The purpose of...

Whether or not realized the realities of political praxis that leads to the dimension and space that seemed to be free value (value free), putting aside ethics / moral, so far from the practice of politics in accordance with the values of the philosophy of the Indonesian nation itself, this indicates...

The changing global economic situation has brought pressure on China's economic downturn. Under this background, only by strengthening the construction of a new open economic system can China's sustainable economic development successfully cope with various risks in the economic downturn. In the process...

The purpose of this study was to determine the impact of work engagement on RRI Kupang employees based on three dimensions: vigor, dedication, and absorption. A simple linear regression model was used as the analytical method in this study. The data processing technique was carried out with the help...

The tool swept volume has been generally applied in multi-axis NC machining simulation and verification. For the characteristic and actual condition, a general cutter model was built, and based on that a new method to simulate the tool swept volume of multi-axis milling was represented. The geometric...

with the rapid development of market economy in our country, the status of small and medium-sized enterprises in our country national economy is more and more high. But now, there are many restrictive factors hindering the development of small and medium-sized enterprises, including financing which is...

This paper proposes a new detection method for accurate detection of dimension of thin sheet parts, breaks a traditional manual detection mode, comes up with a machine vision detection system, conducts research analysis of definition, application, principle and hardware structure of this detecting technique,...

In recent years, more and more enterprises are required to disclose their sustainability reports, which means that sustainability plays an important role in the expansion and operation of global enterprises. Sustainability is also used to measure the development status and cultural orientation of the...

In view of the line loss control and the anti-electricity-stealing requirements faced by electric power companies, the design of the intelligent anti-electricity-stealing remote monitoring system has been proposed. The real-time monitoring of primary side of line current, the current of junction box...

As employment needs change, foreign language talents not only must master foreign languages and understand foreign trade, but also have a command of knowledge in accounting, enterprise management and marketing, and must be in line with international standards in the field of thought. Therefore, major...

In order to meet the diverse needs of equipment on-line monitoring, process monitoring in process industry, this paper designs a polymorphic network architecture based on an integrated gateway. It can easily adjust the network operation mode according to the change of application requirements. It provides...

With the development of automotive lightweight technology, multicomponent integrated hot press forming is an important technology, which can realize lightweight car body forming with complex geometry. In the cutting process of large integrated thermoforming parts, the multi-robot multi-head synchronized...

This study aims at exploring the media use, gratification sought, and information needs of tourists in Bali and whether there is any difference before, during, and after the Covid-19 pandemic. With accidental and purposive sampling, 115 tourists visiting four (4) Bali‘s main beaches answered the questionnaire...

In this paper we propose a framework for modeling, representing populating and enriching information from online collaborative sessions within Web forums. The main piece of the framework is an ontology called Collaborative Session Conceptual Schema (CS) that allows for specifying collaborative sessions....

This study examines the differences occurring in A 356 alloy and A 356/5 wt.% Si CP composite during unidirectional sliding mode (USM) and reciprocating sliding mode (RSM) against 800 grit abrasive Si C medium at low parametric conditions, 5N and 0.2 m/s. Composite is prepared through liquid stir casting...

In the context of Industry 4.0, it is increasingly necessary to carry out undergraduate teaching of machine vision. Combined with the characteristics of this course and the characteristics of the intelligent manufacturing specialty in the application-oriented undergraduate colleges, the problems faced...

Fuzzy rule-based systems suffer from the so-called curse of dimensionality when applied to high com- plexity datasets, which consist of a large number of variables and/or examples. Fuzzy rule-based clas- sifier ensembles have shown to be a good approach to deal with this kind of problems. In this contri-...

The ability of joint attention is a series of behaviors that develop early in the life of a child and have an important role in communication and social development. This study aims to describe the profile of joint attention skills for children with autism spectrum disorders and intervention strategies...

This study aims to: (1) Find out the organizational structure of SSETC Archery Central Java. (2) Find out the steps in recruiting athletes for the Student Sports Education and Training Center (SSETC) Archery in Central Java. (3) Find out the implementation of facility and infrastructure management to...

In the current pattern of “three comprehensive education” in universities, we will carry out teaching mode reform and innovation with “learning activities as the main line”, and explore the “OBE + online open course” model; By optimizing the construction of existing online open courses, adhering to the...

In order to do large scale line length heat-sealing for the sound insulation cotton and resistance to flame clad-ding layer materials of new aircraft, the system has been improved according to the original heat sealing ma-chine temperature control system. It uses thermocouple sensor of high response...

In order to get the relationship between China’s carbon emissions and transportation industry, we calculate the growth rate of carbon emissions and freight turnover based on the time series data from 1982 to 2014, showing them by the line chart. According to the change of the growth rate, carbon emissions...

A new cubic mechanism with 6 degree of freedom based on the S (P) [T] output base and P input base presented, upper and lower chains composed of up and down, back and fore, left and right linear drivers, two chains connected with the hooke joint and ball joint respectively, a passive P joint connect...

The precision machining of shaft parts is of great significance in the fields of aerospace, automobile manufacturing and so on. For important high precision shaft parts processing, especially in the beginning of mass production, it is easy to produce single piece of waste. Aiming at the error compensation...

A class of stochastic functional differential equation boundary value convergence problem is researched, and the support vector machine (SVM) optimization classification theory is taken for the data classification, and the training sample set processing algorithm is proposed based on the stochastic functional...

on-line testing, 3D model reconstruction, Picking-up algorithm CsGL, STL model

The objective of this study is to create the methodology and methods of assessing the labor intensity in terms of time expenses for the conduct of research in the energy complex that has the creative component. For this purpose, the line of tasks was solved, including the following: the determination...

This research report will focus on the question that: how to maximize earnings by using financial risk management in the United States during Coronavirus Pandemic. The whole essay will be divided into 3 parts. And those are just the three research questions. The researcher will discuss the pandemic’s...

This study aims to examine the influence of economic, environmental, and social factors on manufacturing sustainability, which subsequently affects community development as reflected by well-being and social capital. The research was conducted at Kampung Batik Laweyan, one of the oldest batik industry...

The rapid increase of vehicles and the growth of smart transportation systems have created a strong demand for accurate and efficient Automated License Plate Recognition (ALPR) systems. This research presents an end-to-end ALPR framework optimized for Bangladeshi license plates, addressing challenges...

The subways are engineering construction projects with highly centralized mechatronic, electrical and electronic systems, which are vulnerable to be attacked by lightning, and causing personal injuries and economic losses. Through calculating of the number of the predicted lightning strikes in Jinan,...

Amorphous (Fe0.5Co0.5)73.5Cu1Nb3Si13.5B9 wires were submitted to the thermal treatment of Joule-heating at current (ja = 26 - 45.5 A/mm2) and time t = 20 - 600 s . The effects of annealing on the magnetic properties has been investigated in order to improve the soft magnetic properties by the measurements...

With the development of market economy, high-voltage XLPE insulated conductor, as a key component of urban transmission line, plays an important role in maintaining the safe and stable operation of urban high-voltage line. The completion acceptance test of high-voltage conductor is a defect test before...

Buggy development is increasingly rapid with its application to tourism facilities such as hotels or golf courses. The development of electric vehicles is certainly inseparable from the energy source or energy storage component, better known as the battery. The battery component is an important part...

In view of such a common phenomenon that the CDIO-based learning method is unable to guarantee high learning quality, this paper proposes a knowledge unit-based learning quality evaluation model in English major that is adapted to the CDIO environment based on the fuzzy comprehensive evaluation method...

Tanimbar in this study is an archipelago located in the southeastern part of the Maluku islands. The archipelago was initially uninhabited; therefore, the mention of Tanimbar was based on considerations relating to the origin of the people who inhabited the island. The word Tanimbar comes from the word...

This paper based on Quanzhou bay cross-sea bridge. Quanzhou Bay Bridge Northern Approach, width 20m, was erected with the "T" structure cantilever assembly method. "T" configuration closure may occur Faulting phenomena. Analysts predict that the weight of precast segments, inelastic deformation of segments,...

The operational planners in power grid companies perform a large number of offline voltage stability studies for a variety of operating conditions. How to effectively determine voltage stability limits from massive amount of offline data has become a challenge for operational planners. This paper applies...

This paper, based on an ongoing mountainous area high-fill embankment project, investigates the high-fill pile foundation and cantilever retaining wall composite support structure in loess gully regions. A numerical simulation method was employed to analyze the stress and deformation process of the composite...

Industrial design is very important in human being history. This paper reviewed some special perceptions in its whole processing. And nowadays, many new researches and applications are being used in this field: digital design and manufacture, virtual methods, humanistic principles, etc. In future industrial...

With the implementation of the “Belt and Road” strategy, China’s cultural outreach in the countries along the line has accelerated significantly, but it still faces enormous cultural export barriers. In translation activities, there are various conflicts between material interests, political interests,...

The force situation of pole was analyzed in detail through the establishment of three-pole model, and the five-pole model was built on the basis of the former model. Besides, the influence of external factors including height difference, span, wind angle and line angle to the pole were studied, and the...

After ending the Radar Antenna modification on the airborne plane, the initial installation error is need to be measured and to be compensated with the initial error. For the attitude measuring requirements of airborne radar Antenna mounted, This paper studies a non-contact optical measuring method based...

a vacancy line defects on the [ ] and [ ] direction; the GaN single-layer terraces defects of GaN(0001) surfaces are studied by first-principle calculations based on density functional theory. The surface energy, charge density, and Mulliken charge population of defect surfaces are calculated, and the...