Proceedings of the 2016 International Conference on Advanced Materials Science and Environmental Engineering

283 authors
Ali, Khalid Ali Abdelaziz
Position Analysis of 3-DOF 3-RPS Parallel Manipulator
An, Ki-Seok
Synthesis and Characterization of Uniformly-Aligned MoO3 Nanobelts
An, Renbo
An Indoor Positioning Algorithm using Bluetooth Low Energy RSSI
Apirun, Chanthong
Microwave Drying Machine for Sea Bass Leathers
Arkom, Sudram
Microwave Drying Machine for Sea Bass Leathers
Artemenko, Alexey A.
Experimental Investigations of the Radio Wave Attenuation Processes through the Paths Leaving Buildings
Bao, Zhenming
Design of Low Power Spy Type Wireless GPS Tracking Terminal System
Begimbayeva, Yenlik
The Development of a Structural Scheme of National Segment in a Protected Cross-Border Space
Benkhenafou, Fethi
Investigation on Microwave Energy Attenuation into the Epoxy Glass Thick Parts with Curve- Shaped Geometry
Biyashev, Rustem
Development of an Encryption Algorithm Based on Nonpositional Polynomial Notations
Biyashev, Rustem
The Development of a Structural Scheme of National Segment in a Protected Cross-Border Space
Biyashev, Rustem
Modified Symmetric Block Encryption-Decryption Algorithm Based on Modular Arithmetic
Cao, Minggao
On-Line Monitoring of Photometric, Colorimetric, Electrical and Thermal Parameters during LED Accelerated Life Testing
Cao, Qingcong
A Clustering Routing Algorithm for Heterogeneous Sensor Networks with Multilevel Energies
Cech, Jindrich
I-Pillars of Noise Barriers Made of Prestressed Steel Fiber Concrete and Prestressed Concrete with Footings Length of 800 mm
Chai, Song
An Indoor Positioning Algorithm using Bluetooth Low Energy RSSI
Chaiyo, Pitchanunt
Synthesis and Characterization of Uniformly-Aligned MoO3 Nanobelts
Chamninok, Pattanasuk
Synthesis and Characterization of Uniformly-Aligned MoO3 Nanobelts
Chang, Ta-Peng
Study of Concrete Aging Effect on the Contact Force and the Contact Time during the Impact of an Elastic Sphere upon a Viscoelastic Beam
Chen, Bin
Test and Improvement of Flow Distribution in a Sudden Changed Structure
Chen, Bin
Research on Evaluation Method of Video Stabilization
Chen, Changtao
A Novel Study on the Power Output Characteristics of CT Power Supply
Chen, Der-Fa
Research into the Improvement on Hexagonal Socket by Applying the System Innovation Theory
Chen, Hung-Shiau
Evaluation of Biodiesel Tribological Performance under Reciprocating Sliding Conditions
Chen, Rongchang
Study on ESI-based Marine Oil Spill Emergency Response Decision Support
Chen, Wei
Choice and Application of Green Materials in Product
Chen, Wuyi
Thrust Bearing Stiffness Testing Based on Multidimensional Loading Device
Chen, Ying
Assessment of Heavy Metal Pollution of Dustfall in Xi'an City, Northwest China
Chen, Yuanqiang
Robust Stability of Polytopic-Type Uncertain Singular Stochastic Systems with Time-Varying Delays
Cheng, Xiao
Recent Progress in High Shear Wet Granulation Process
Chernoyarov, Oleg V.
Experimental Investigations of the Radio Wave Attenuation Processes through the Paths Leaving Buildings
Cho, Jung-ho
Mechanical Properties of Tire-Rubber Particles Contained Mortar Composites
Choi, Kyung-Jae
High Efficiency White Light-Emitting Device Based on Quantum Dots/Polymer Hybrid Emissive Layer
Choi, Seong-Ho
Synthesis and Characterization of TGA-Capped CdSe QDs for Electrochemiluminescence (ECL) Biosensor
Chongkhong, Sininart
Optimization of Nipa Sap Preparation for Ethanol Production
Choo, Jinkyo F.
Testing of a New Electricity-Generating TMD by Shaking Table
Choo, Seung-yeon
Mechanical Properties of Tire-Rubber Particles Contained Mortar Composites
Chung, Ruey-Gwo
Research into the Improvement on Hexagonal Socket by Applying the System Innovation Theory
Dai, Yuanyuan
The Potential Ecological Risk of Pb for Multi-phase Medium of Artificial Reefs
Dai, Yuanyuan
The Potential Ecological Risk of Cd for Different Benthos in Artificial Reefs
Deng, Li
Study on MnS Precipitation Thermodynamics of DL05 Cable Steel
Deng, Xinli
Fault Diagnosis System Identification Based on Impedance Matching Balance Transformer
Ding, Yang
Grid Project Cost Control Research Based on Data Mining
Dong, Yubo
The Potential Ecological Risk of Pb for Multi-phase Medium of Artificial Reefs
Dou, Jinyue
Assessment of Distribution Network Planning Based on Dynamic Weighted Particle Swarm Algorithm with Distributed Generation and Energy Storage
Douadji, Lyes
Investigation on Microwave Energy Attenuation into the Epoxy Glass Thick Parts with Curve- Shaped Geometry
Du, Biao
The Optimization Design of the Compressor Connecting Rod by using of ANSYS
Du, Biao
The Structure Optimization of T-slots Dry Gas Seal Faces
Du, Qin
Expression and Purification of Recombinant Human Amelogenin Using the Prokaryotic Expression System
Du, Weiwei
Investigation on Microwave Energy Attenuation into the Epoxy Glass Thick Parts with Curve- Shaped Geometry
Du, Zhengzhong
An Indoor Positioning Algorithm using Bluetooth Low Energy RSSI
Duan, Lei
A Novel Study on the Power Output Characteristics of CT Power Supply
Fei, Shangcai
Three-Point Bending Behavior of Web-core Steel Sandwich Panel
Feng, Lijie
Orientation and Development of Surveying, Mapping and Geo-information under the Smart City Construction
Feng, Xiaoyun
Expression and Purification of Recombinant Human Amelogenin Using the Prokaryotic Expression System
Fu, Wei
Research and Application of In-situ Measure Device on High-Efficiency Convergence Deformation for the Large Cross Section Roadway
Galal, Mohamed
Fuzzy Logic Controller for Enhancing RCS's Lab Measurements
Gao, Yan
The Potential Ecological Risk of Cd for Different Benthos in Artificial Reefs
Ge, Mengyuan
Analysis of GHG Emission Verification of the Iron-Steel Industry — Case Study of an Iron-Steel Company in Hebei Province
Gopalan, Anantha-Iyengar
New Nafion/Conducting Polymer Composite for Membrane Application
Gu, Xianglei
Research on the Law of Influence of Bending Force on Strip Crown
Guo, Chenning
Effect of Obstacles and Horizontal Wind on the Fire Behavior inside Engine Compartment of Motorcoach
Guo, Hongbo
A Kind of Calibration Device for Bitumen Needle Forcemeter
Guo, Ruochen
A Novel Study on the Power Output Characteristics of CT Power Supply
Ha, Dong-ho
Testing of a New Electricity-Generating TMD by Shaking Table
Haumen, Armanbek
Modified Symmetric Block Encryption-Decryption Algorithm Based on Modular Arithmetic
He, Hong
Regular Aligned Porous Waterborne Polyurethane Composite Obtained by a Directional Freeze-Drying Process
He, Xin
Analysis of GHG Emission Verification of the Iron-Steel Industry — Case Study of an Iron-Steel Company in Hebei Province
Heon, Kim Il
A Study on the Creep behavior of FRP beam-strengthened RC beams
Hou, Chunqiang
The Potential Ecological Risk of Cd for Different Benthos in Artificial Reefs
Hsu, Ching-Yu
Effect of Soil Properties on Safety Performance of W-beam Guardrail
Hsu, Ching-Yu
A Numerical Study of Hovercraft Main Hull Structural Response Subjected to Shockwave from Underwater Explosion
Hsu, Wei-Jie
Study of Working Medium on the Hydrophilic Surface of Evaporation Enhancement
Hu, Bo
Assessment of Heavy Metal Pollution of Dustfall in Xi'an City, Northwest China
Hu, Chunsheng
Three-Point Bending Behavior of Web-core Steel Sandwich Panel
Hu, Jiandong
Research on Intelligent Tap Testing of Aviation Composite Material
Hu, Sunxi
Research and Application of In-situ Measure Device on High-Efficiency Convergence Deformation for the Large Cross Section Roadway
Hu, Yimin
On-Line Monitoring of Photometric, Colorimetric, Electrical and Thermal Parameters during LED Accelerated Life Testing
Huang, Changqing
Research on the Law of Influence of Bending Force on Strip Crown
Huang, Dongmei
Effect of Obstacles and Horizontal Wind on the Fire Behavior inside Engine Compartment of Motorcoach
Huang, Dongwei
The Stability Analysis on a Predator-Prey Model with Allee Effect
Huang, Shan
The Cavity Image Denoising Method Combined Median Filter with Adaptive Filter
Huang, Xitao
Orientation and Development of Surveying, Mapping and Geo-information under the Smart City Construction
Huo, Jie
Analysis of GHG Emission Verification of the Iron-Steel Industry — Case Study of an Iron-Steel Company in Hebei Province
Hwa, Hong Won
A Study on the Creep behavior of FRP beam-strengthened RC beams
Isaeva, Olga S.
Automation of Spacecraft Onboard Equipment Testing
Jeong, Deok-hwa
Mechanical Properties of Tire-Rubber Particles Contained Mortar Composites
Jiang, Peng
Cast Aluminum Energy Consumption Model Based on Fuzzy Petri Net
Jiang, Xiaoxia
Three-Point Bending Behavior of Web-core Steel Sandwich Panel
Jin, Siyu
Investigation on Microwave Energy Attenuation into the Epoxy Glass Thick Parts with Curve- Shaped Geometry
Jing, Gang
On-Line Monitoring of Photometric, Colorimetric, Electrical and Thermal Parameters during LED Accelerated Life Testing
Jing, Genqiang
A Kind of Calibration Device for Bitumen Needle Forcemeter
Ju, Lee Hyoung
A Study on the Creep behavior of FRP beam-strengthened RC beams
Jung, Eueng-Young
Synthesis and Characterization of TGA-Capped CdSe QDs for Electrochemiluminescence (ECL) Biosensor
Kalimoldayev, Maksat
Development of an Encryption Algorithm Based on Nonpositional Polynomial Notations
Kang, Shin-Won
High Efficiency White Light-Emitting Device Based on Quantum Dots/Polymer Hybrid Emissive Layer
Kapalova, Nursulu
Modified Symmetric Block Encryption-Decryption Algorithm Based on Modular Arithmetic
Kaur, Baljeet
Capacity Enhancement of WDM-TDM Next Generation Bidirectional Passive Optical Networks Using DPSK Technique
Kim, Ju-Seong
High Efficiency White Light-Emitting Device Based on Quantum Dots/Polymer Hybrid Emissive Layer
Kim, Sae-Wan
High Efficiency White Light-Emitting Device Based on Quantum Dots/Polymer Hybrid Emissive Layer