Search all articles
203417 articles
Proceedings Article
Fostering Undergraduate Students’ Creativity via the Training of Advanced Technologies
DengGuang Yu
The teaching in higher education should pay more attention to nurture the undergraduate students’ creativity. Advanced technologies could act as a fine platform to foster creative learning and innovative teaching. An experiment of a short time period training using three types of up-to-date technologies...
Proceedings Article
Marketing Strategies of Enterprise News Planning
Zhang Yong
With the improvement of economic development and scientific level in China, competition among enterprises becomes increasingly fierce. Under the influence of this market economy environment, enterprises have to be more concerned about brand image and publicity planning means than before. Therefore, marketing...
Series: Advances in Engineering Research
Proceedings Article
Research and Design on On-line Monitoring of Mechanical Properties of High Voltage Circuit Breaker
Jiajia Song, Jinbo Zhang, Bin Chen, Zhengyong Xiong
The statistics of International Meeting shows that most circuit breaker faults comes from mechanical side, so it is of great significance to do research on mechanical fault diagnosis. The implementation of circuit breaker mechanical properties on-line monitoring is an inevitable trend of the development...
Series: Advances in Physics Research
Proceedings Article
Handling Performance Investigation on Geometrical Frame of Three Wheels Vehicle
Wibowo Lutfiyanto, Triyono Triyono, Sinki Sinki, Nurul Muhayat
The aim of investigation was to analyze geometrical effects of frame on vehicle handling. Analysis had been done on prototype of three wheels vehicle. The prototype was designed using revolute joint frame to gain better vehicle handling. Revolute joint frame on the vehicle prototype could be set up into...
Proceedings Article
The Role of Work-Based Learning in Building Employability Skills of Vocational Education Students
Kokom Komariah
The incompatibility between educational outcomes with the need of workforce is predicted due to the mismatch of workforce needs with the qualifications of produced graduates. Therefore, the learning in vocational programs must be able to give the solution. Work-Based Learning (WBL) is one of the learning...
Proceedings Article
Analysis of dividend policy of listed company and its financial impacts
Xian Mei, Xing Wei
Dividend policy-making is an important part of enterprise profit distribution, and moderate and reasonable dividend distribution policy is beneficial to the development of enterprise and improving the earnings level in the future, as well as enhancing shareholder confidence in the enterprise, making...
Series: Advances in Engineering Research
Proceedings Article
The effects of Roxithromycin on the Activity of APND and GST in Cipangopaludina Chinensis
Hongwei Wang, Duanbo Cai, Yiwei Liu, Wen Zhao, Fang CAI, Yapeng Ren, Ze zhong LI
Cipangopaludina chinensis which is a kind of benthic invertebrates was taken as experimental invertebrate. In the condition of the Roxithromycin, the activity of APND and GST abstracted from the liver and kidney tissues of Cipangopaludina chinensis to investigate the effect of Roxithromycin on the biochemical...
Proceedings Article
Research on Ways of Private Enterprises in Participating in New Urbanization of Zhengzhou City
Yanna He
The urbanization construction of Zhengzhou city plays an exemplary role in the development of Henan province. This article summarizes the periodic achievements made by urban construction of Zhengzhou city and problems derived from rapid development, analyzes the mutual promoting relationships between...
Series: Advances in Engineering Research
Proceedings Article
Research on the Application of Physical Information Searching based on the Internet
Linwang Zhou
The main source of sports information in Chinese portal sites comes from self collection. Currently sport channels content construction has formed a good and interactive pattern of sports news information and material background. Sport information resource is composed of types of knowledge, skills, news,...
Proceedings Article
Reflection on Talent Cultivation Mode of Higher Vocational Art and Design Education in New Era
Lei Zhang
This paper has presented a systemic description on talent cultivation mode of higher vocational art & design education from longitudinal and transverse perspectives using the method of theoretical research and case analysis in combination with comparison and conclusion, and has put forward an assumption...
Series: Advances in Engineering Research
Proceedings Article
Highway Electric Vehicle Charging Load Prediction and its Impact on the Grid
Huiyi Wang, Xueliang Huang, Lixin Chen, Yuqi Zhou
In this passage, a new method is proposed to predict the load of electric vehicles (EVs) on highway. In this method, a simplified highway network containing charging stations is established, based on which we can generate an adjacency matrix. Then the origin and destination (OD) of vehicles are extracted...
Proceedings Article
An Accounting Model of Carbon Footprint in Urban Distribution Systems
Lei Yang, Jiahui Hong
With the rapid development of urban distribution system, the distribution mode is exhibiting the characteristic of irrational, and the carbon emissions of urban distribution have also become the focus of attention. This paper focuses on the research of the accounting model of carbon footprint in urban...
Proceedings Article
Estimating Pb concentration of soil in the mining tailing areas base on field spectroscopy and random forests
Jie Lv, Kangning Wang, Chonggui Li, Yuancheng Huang, Xiaoliang Shi, Ying Liu, Ningyan Hao
Heavy metal pollutions of soil is one of the serious problems in the mining tailing areas, therefore, it is significant to estimate heavy metal of soil in the mining tailing areas. This research take Jinduicheng Mo mining tailings, Huaxian, Shaanxi Province as the study area. A total number of 288 soil...
Proceedings Article
Effect on the Longitudinal Bending Deformation of Foam-Core Sandwich Superstructure When Material Parameters Alter
Bailu Luo, Kai Qin, Jie Lv, Renjun Yan
This paper analyzes how the deformation pattern of the superstructure's side wall alters when the material parameters of the laminate face sheet are tempered while the Foam-Core Sandwich Superstructure is under vertical and horizontal forces separately. The results revealed that, under each separate...
Proceedings Article
Sound pressure level calculation methodology investigation of corona noise in AC substations
Xiaowen Wu, Nianguang Zhou, Chunming Pei, Sheng Hu, Tao Huang
In order to improve the measurement accuracy of corona noise in AC substations, the characteristics of different noise sources are measured and analyzed. Wavelet analysis method is employed to decompose the original noisy corona signal. A stop-band comb filter is designed to process the reconstructed...
Series: Advances in Engineering Research
Proceedings Article
Analysis of un-tensioned fully grouted rock bolt – A case study
Singh Deepanshu R, Mishra Arvind K, Agrawal Harshit, Manna Chanchal
Stability of structures in any mining excavation is critical and roof rock stability has long been the primary concern in all underground excavations. There are plenty of supports systems that has evolved over the years, among them rock bolts are widely used support system in mining and various civil...
Proceedings Article
A Definition of Structure Hole and Algorithms
Tianji Zhao
In this paper we only use graph's structural information to generate other information in order to get the structural hole. Our work firstly delivers a formula well defines the structural hole, gives an iterative algorithm and a descending algorithm to find solution. The definition combines the advantages...
Proceedings Article
Improving Louvain Algorithm for Community Detection
Bin Hu, Wenmin Li, Xuesong Huo, Ye Liang, Minghui Gao, Pei Pei
Community is one of the important characteristics of reality network, which can effectively reflect the inner information of network and the relation among nodes. For the division of the community there already had many effective algorithms, the Louvain algorithm based modularity is a more popular community...
Proceedings Article
Human Resource Outsourcing and Risk Management for SMEs
Shunhong Ji
Human resources outsourcing has become a major trend in HR management in small sized enterprises. It is becoming more important for business management. As an advanced management method, there must be high risk in this process. Thus, appropriate risk management is extremely necessary. In the study, we...
Proceedings Article
Compressed Deep Convolution Neural Network for Face Recognition
Ying Zou, Xiaohong Liu
Deep convolution neural network (CNN) has achieved a great success on face recognition techniques. But most of CNN models tend to be much deeper, which are at the expenses of high consumption of computation and storage. So, it is hard for these deep CNNs applied to mobile equipments because of poor computational...
Proceedings Article
Behavior of Curved Concrete-Filled Circular Stainless Steel Tubular Struts under Compression
Lianqiong Zheng, Min Chen, Yongqian Zheng
A finite element analysis ( FEA ) model for curved concrete-filled stainless steel tubular members under compression was developed by the universal FEA software ABAQUS. The failure modes of curved concrete-filled stainless steel tubular struts were compared with that of empty curved stainless steel tubes...
Proceedings Article
Research on the Work Mode of University Students under the New Media Environment
Dong-xu Liu, Zhao Liu, Ji-peng Zhao
In recent years, with the rapid development of digital technology, new media has been used by more and more people, which affects people's ideas, value orientation and behavior, etc.. The contemporary university students' thought is open, and they have intense curiosity to new things, at the same time...
Proceedings Article
The Factors Influencing the Repurchasing Intention of Bank Insurance in Taiwan
Jie Zhu, Meichiao Lai, Wuder Tsay
This study aims to explore the factors that influencing the repurchasing intention of bank insurance in Taiwan. Data were collected from questionnaire survey, 380 questionnaires were administered, the valid sample was 330 (86.84%). Reliability analysis, T-test, one-way ANOVA, correlation analysis and...
Series: Advances in Engineering Research
Proceedings Article
Visual Analysis of Multi-factor Association on Inland Waterway Accident
Cong Lu, Shu Gao
In order to explore the relationship between the multi factors of the inland river shipping accident and understand the law of the accident, the data of Yangtze River trunk line from recent years are collected and analyzed. First, we extracted the key factors of the shipping accidents and preprocessed...
Proceedings Article
Design and Implementation of a Remote Monitoring System for The Elderly Based on Cloud Architecture
Y.Q. Zhao, Z.Q. Yu
A monitoring system of caring the elderly is designed to solve those problems that occur constantly under the serious aging situation. In the system, the ZigBee technology, sensor technology and cloud platform technology are comprehensively used. The system can monitor the elderly’s sleepactionsduring...
Proceedings Article
Impulse Radio UWB Signal Detection Based on Compressed Sensing
T. Zou, Y.M Li, T. Li, W.H Xu, Y.Z Yan
The extremely high sampling rate is a challenge for ultra-wideband (UWB) communication. In this paper, we study the compressed sensing (CS) based impulse radio UWB (IR-UWB) signal detection and propose an IR-UWB signal detection method based on compressive sampling matching pursuit (CoSaMP) algorithm....
Proceedings Article
Research on Modeling and Simulation of Power Electronic Circuits Based on MATLAB
Quan Guo, Kun Xu, Fangyi Sun, Xueqian Li
The example of three-phase bridge controlled rectifying circuit discussed the method of the utilization of MATLAB SIMULINK on the modeling and simulation of power electronic circuits, and gave the simulation result waveform, verifying the convenience, intuition, high-efficiency, high speed, genuineness...
Series: Advances in Engineering Research
Proceedings Article
PEG-Coated Titania Nanatubes for Controlled Drug Release
Fei Luo, Guojie Xu, Yan Liu, Chunling Xie, Xiufeng Xiao
Developing coatings on implant surface as drug carriers can reduce organ toxicity and effectively deliver drug locally to the target compared with the oral approach. Titanium dioxide (TiO2) nanotube has great potential for this application for widely used Ti implants because of its high surface area,...
Series: Advances in Engineering Research
Proceedings Article
A New Privacy-Preserving Smart Grid System
Jiaping Lin, Xingwen Zhao
Smart grid can be used to continuously measure, monitor, predict and even control electricity consumption. However, the energy consumption information may reveal the privacy of users. In this paper, we propose a new privacy-preserving smart grid system based on a k-times short dynamic group signature...
Proceedings Article
Modern Paradigm of Ensuring Food Security Risk Resistance in Russia
A. Badalova, V. Larionov
Food security is an important component of economic and national security. Therefore, increasing resilience to food security risks and threats is required. This problem is very actual in modern Russia. The purpose of the study is to generate the new paradigm of ensuring food security. This paradigm is...
Proceedings Article
A Study on the Coordinated Development of Higher Education and Local Economy -- A Case Study of Yuxi Normal University
Yun Bai
Serving local economy is the focus of yuxi municipal government and colleges and universities. The innovation of science and education implemented by yuxi normal university is beneficial to the exploration and practice of serving the local economic development of yuxi from the top-level design, organization...
Proceedings Article
Geoproduct Development as Part of Geotourism at Geopark Belitong
Ayu Krishna Yuliawati, Rofi Rofaida, Budhi Pamungkas Gautama, Mohamad Sapari Dwi Hadian
Geopark in Indonesia has SMEs which are engaged in geoproduct development. Geoproduct are products and services created by the community living in the surrounding geopark areas. Geopark has become a targeted destination for geotourism in Belitong, Indonesia. These geopark have unique geoproduct development....
Series: Advances in Engineering Research
Proceedings Article
Study on Surface Temperature Characteristics of Chengdu Based on Multi-temporal Landsat Data
Tao Zhou, Rongshuang Fan, Congqiang Hou, Yuting Hou
By studying the multi-year surface temperature (LST) phenomenon in the center area of Chengdu, the characteristics of surface temperature in the context of population (POP), gross domestic product (GDP), and building index (NDBI) reflecting the state of urban economic development are analyzed. The relationship...
Proceedings Article
The state regional debt as a factor of electoral behavior
Svetlana Evdokimova, Mano Mgeryan, Mikhail Sheviakov
In the article the need is shown to find qualitatively new ways to solve the problem of budgetary security of the constituent entities of the Russian Federation and reduce social tensions in the regions. In recent years, the economic differentiation between the regions of the Russian Federation has increased,...
Proceedings Article
Kala Ornament of Prambanan and Sewu Temple
Syafii Syafii
The study used a qualitative approach. Based on the objective of the study, the location of this study is Prambanan and Sewu Temple. The data gathering technique used wasan observation with camera help. The analysis technique was started from the reduction stage, and then data explanation, the last was...
Proceedings Article
A Study on the Education Mode of E-Business Major in Wuhan Application-oriented University
Shihua Zhang, Sheng Cao, Wendi Zhang
At present there are many universities in Wuhan cultivated students can't satisfy the enterprise and the social demand. In this paper, based on the developing pattern of e-commerce professional universities in Wuhan city for a deeper analysis, find out the problems and perfect all kinds of training mode....
Proceedings Article
New industrialization: spatial factors of regional economic rise
E.V. Timacheva, T.B. Ivanova, A.N. Tabakov
Taking into account the factors of the regional economic rise the authors highlighted the need for the new industrialization as the basis for the third industrial revolution. Firstly, new enterprises generate technologies belonging to modern technological wave. Secondly, there is a necessity to invest...
Proceedings Article
Aesthetical and Philosophical Values of Mu Yi (Wooden Fish) in Vihara Buddhi Bandung
Tjutju Widjaja, Setiawan Sabana, Ira Adriati
Vihara Buddhi, formerly known as “Female Temple”, is a sacred place where Chinese people in Indonesia worship their Gods and do their rituals. Chinese Indonesians adhere to Sanjiao teaching. Sanjiao means Three Teachings; a syncretic form of three main religions or teachings: Buddhism, Confucianism,...
Proceedings Article
Relationship between Boboko and Women in Logoko Boboko Dance
Fitri Deviani, Tati Narawati
This study of Boboko Logor dance aims to find out the relationship between Boboko and women, where Boboko is a Sundanese local wisdom product commonly used by women from ancient times to wash rice, serve rice, or shop for food. Boboko certainly plays a more important role. A deeper meaning can be explored...
Proceedings Article
Intellectual Capital Influence on Financial Performance Banking
Ono Tarsono, Ayuni Fauziyah, Faris Faruqi
This aims study is to test whether the influence of intellectual capital to the financial performance of banking listed on the Indonesia Stock Exchange (BEI). Independent variable in this research is intellectual capital measured using VAICTM and dependent variable is the financial performance of banking...
Series: Advances in Engineering Research
Proceedings Article
Welding Residual Stress Characteristics of Bolt-welding Joint in TBM Split Cutterhead
Shuli Zhang, Jianfu Zhang, Zhong Guo, Peng Gao, Tianyu Du
The welding seam of the split cutterhead of tunnel boring(TBM) machine is easy to generate cracks in the working process, which affects the construction process and increases the cost. The double box structure is extracted from TBM cutterhead. The effects of high-strength bolts and welding speeds on...
Proceedings Article
Management Of Linus Hardcore Students ' Achievement In Elementary School Numeracy Program
Jumrah Binti Sultan, Khuan Wai Bing
This study was conducted to understand the factors affecting the implementation of LINUS Numeracy program for hardcore students in three schools in the Kinta Utara District, Ipoh, Perak. This study used a purpose sampling method in selecting teachers as participants. Interviews, observations and review...
Proceedings Article
Reception of Neo-Kantian Philosophy in Russian Academic Circles: Alexander Vvedensky
Vladimir Dudyshkin
The article examines the process of perception (also including critical thinking) and interpretation of Neo-Kantian philosophy, especially of the Marburg school, by Russian academic philosophical circles in the late 19th – early 20th century. The study focuses on Russian thinker Alexander Vvedensky;...
Proceedings Article
Website Management www.kemenpar.go.id in Promoting Lake Toba As an Indonesian Tourism Object
Novi Erlita, Grevari Noviana
Promoting Indonesian tourist destinations is done by the Ministry of Tourism through the Division of Legal and Public Communication Bureau where in this case the public relations plays a role in promoting and introducing Indonesian tourist destinations. The Ministry of tourism develops a strategy of...
Proceedings Article
Development of School Culture in State High School 1 of Padangpanjang
Wisma Endrimon, Rusdinal, Sufyarma Marsidin, M. Zaim
The success of a school in achieving various leading achievements is no doubt the result of a long process. One of the indicators of such assumed achievement is the success in building school culture, which means by having “good” school culture, the school will produce good students who will become...
Proceedings Article
New Public Service in a Democratic Government
Ishak Kusnandar
This study aims to explain the new public service in democratic governance. New public service in a democratic government is very important, because new public service is one of the characteristics of a democratic government that must be realized, so that it will strengthen the existence of a democratic...
Proceedings Article
The Education Measurement Specific Effect on Sustainable Development: An Experience of Indonesia
Abdur Razzaq, Sari Lestari Zainal Ridho
Abstract—the sustainability development is a target to be achieved by any nations, it requires to have qualified human capital. While population`s level of education, especially those who work, are still relatively low. The failure in education indicates the failure in the education quality improvement,...
Proceedings Article
The Influence of Modification Field Towards the Hit Playing Skills and Drives in a Squash Games
Krisno Giovanni, Fathan Al Ghifari, Nuryadi Nuryadi
The purpose of this research is to know the influence of the modification field towards the spanking Playing Skills and drives in a squash game. The methods used in this research is experimental with observation instruments AIAP (Assessment Instrument Appearance Playing) and test drive forehand and backhand....
Proceedings Article
Development Of Gunung Payung Cultural Park As One Of Tourism Attraction In Kutuh Village South Kuta
Ni Nyoman Sri Astuti, Ni Ketut Bagiastuti, I Ketut Suarta
This study aims to determine what are the internal and external factors and development strategy of Gunung Payung Cultural Park as one of the tourist attraction in the village of Kutuh Kuta Selatan. This research use data collection methods are observation, interview, literature study and documentation....
Proceedings Article
Development of KADIR Learning Model to Enhance Students’ Mathematical Problem Solving Skill
Kadir Kadir, Moria Fatma, Rizki Heryani Oktavianti
The purpose of the present study was to develop KADIR (Koneksi, Aplikasi, Diskursus, Improvisasi and Refleksi) learning model kits for improving students' Mathematical Problem SolvingSkill (MPSS). This study was a research and development study employing the 3-D (Define-Design-Develop). The field try-outs...