Search all articles

In this paper the methods of chemical co-precipitation method were used to produce nanomaterial of LaAl11O18. In order to find the effects of the preparation parameters on its micoscopic structure and the influences of calcinated temperature , keeping warm time and pH value on organizational structure...

Mining emerging patterns aims at contrasting data sets and identifying itemsets that characterise a data set by contrast to a reference data set, so as to capture and highlight their differences. This paper considers the case of emerging gradual patterns, to extract discriminant attribute co-variations....

The paper discussed the problems in trial-production line for the HIGGS watch, which made against the success of putting the new product into mass production smoothly and introducing it to the consumer market on schedule. After analyzing the causes of the problems, a series of solutions such as communication...

Excitation and measurement mode of Electrical Resistance Tomography (ERT) system would determine the sensitivity, information quantity and noise immunity of the test field. In this paper, a 16-electrode ERT system is cited to conduct a research on 8 excitation modes and 2 measurement modes by numerical...

The Communication Based Train Control system (CBTC)system controls the operation of the train by calculating the moving authorization for all the trains running on the line through the Zone Controller (ZC, for short) arranged on the ground. The centralized vehicle computing system does not need to arrange...

The purpose of promoting green energy in various countries is to replace traditional hydroelectric or thermal power generation, especially nuclear power, which is a safety concern. However, in exploring the application of green energy, special attention should be paid to not only saving energy, but also...

Modern air traffic control system consists of entities of different types. Their list includes front line operators, software, hardware, norms and conditions etc. Norms and conditions of air traffic control as part of entire process are changed according to balance in requirements of safety and efficiency....

Direct yaw-moment control (DYC) has obvious advantages in centralized-drive vehicles, but in 4WID-EV networked control system, the network-induced delays would reduce control performance of DYC and even deteriorate the 4WID-EV networked control system. To ensure robustness of DYC and reduce the adverse...

In order to further investigate the intelligent optimization of particle swarm optimization (pso) algorithm, we carried on the design experiments in this paper, the particle swarm optimization (pso) algorithm, the position of the first set search point X0i and speed V0i initialization;Then evaluate each...

Aesthetic value is one of the important values in the study of fine arts, especially painting. This paper intends to examine the aesthetic value of Roby Dwi Antono entitled “The Colossus”. This paper is studied by qualitative method with form theory. The result of this paper is that the aesthetics of...

Memristor-based computing had emerged as a transformative alternative to conventional CMOS-based architectures, offering unparalleled advantages Regarding the area efficiency, energy usage and computational velocity. This research delves into the design and optimization of memristor-based subtractors,...

In this paper, based on the theory of industrial ecology, biological co evolution theory and automobile industry cluster innovation system characteristics, it is pointed out that automobile industry cluster innovation system is essentially an industrial ecosystem of mutual benefit and co-existence, co-evolution....

The problem of motor fault tolerance of the distributed driving electric vehicle running in straight line is discussed and solved in the paper. The researched vehicle is designed with four in-wheel motors. The motor fault types are divided more detailed. To achieve a good riding stability and dynamic...

The Fule Park, located in Mianyang of Sichuan, with rich historical heritage and local style, is an important and unique representative of Sichuan garden. The park was constructed in use of the natural landscape conditions, while its Road ingenious design, making landscapes, gardens, cities, unique combination...

The documentary “Are Our Kids Tough Enough? Chinese School” released in 2015, contributes numerous classic cases that have been discussed by scholars in the fields of the sociology of teaching and educational psychology, and is often used as teaching materials for related courses in Chinese universities....

Nonprofit Private Universities Corporate governance structure is unique, its special performance in the organization and legal status of the interests counterpart relations, organizational performance assessment methods, and public responsibility mission. Good Governance stressed elements rule of law,...

Based on the analysis of dynamic performance of vehicles and characteristics of engine and motor, the dynamic shift schedule for parallel hybrid electric vehicle (PHEV) equipped with automated mechanical transmission (AMT) is designed. The model is built up on the MATLAB/CRUISE co-simulation platform....

Digital technology is an important starting point of China’s education and teaching reform. Through research and practice, the team clearly takes digital technology as the starting point, the spirit of medical craftsman as the ideological and political goal of the course, adopts the processing technology...

Due to the difference in the number of people investing in offense and defense, it is difficult for the offensive side to break the situation and tear the opponent's defense line. This requires more people to attack and balance the offensive and defensive numbers, so modern football is attacking the...

There are many kinds of teaching techniques and methods to apply. However, the teaching of foreign language is not such an easy thing to do. It is the fact that many of the Indonesian learners are not capable of speaking English very well although they have been learning it for more than 10 (ten) years....

In the traditional portfolio selection problem, asset returns are modeled as fuzzy variables with fuzzy return. However, this approach is limited in its ability to capture uncertainty accurately and in analytical model solving. Here, we aim to develop a new fuzzy chance-constrained portfolio model with...

At present, with the rapid development of science and technology in China, “Made in China” is moving toward “Made in China”. Under the background of 5G era, the rapid rise of high-tech enterprises in the Guangdong-Hong Kong-Macao Greater Bay Area has further accelerated the development process of “Made...

The engineering area studied in this paper belongs to the areas without hydrological data.The actual measurement data and storm record are both lacked. In this paper, the different methods were performed for the analysis of design flood calculation, at the same time, the rationality of results was also...

As an important part of power transition, the safe operation of substation is of great significance. In this paper, according to the characteristics of the substation equipment overheating fault and the theory of mathematical model of support vector classifier, equipment overheating fault diagnosis mechanism...

Innovation and entrepreneurship is the basis for the exhibition industry, it is to enhance and develop the fundamental Chinese exhibition industry. How to really improve the quality of education exhibition, cultivate high-quality creative talents has become a hot topic in the exhibition industry. From...

The regulation of earth resistivity and elastic wave velocity with the change of compaction degree under different moisture contents is studied by experiment. In addition, regression analysis is conducted on the relationship between compaction degree and soil resistivity and elastic wave velocity. Based...

This paper presents the cause analysis, treatment plans and treatment results of a settlement deformation accident at tunnel portal area of left line T1 tunnel in Algeria North-South Expressway. The engineering practice demonstrated the feasibility, timeliness, and safety of the treatment plans. The...

Micro, Small, and Medium Enterprises (MSMEs) have a strategic role in national economic development, including in the region of Kediri City. Covid-pandemic 19 is a challenge for SMEs, not even a few business units which must stop operating. The new recovery adaptation period is an opportunity for the...

The driving force electronic control system composed of electronically controlled engine, automatic transmission and traction control system can realize the active regulation to the driving force, improve vehicle dynamic, trafficability and handling stability. CAN bus technology cannot only avoid the...

Focused on the present situation of the rivers and lakes’ water quality monitoring in China, the monitoring way is single and undeveloped, and water quality evaluation is difficult. A portable rivers and lakes’ water quality online monitoring instrument is developed, which can achieve the real-time remote...

To develop the guided projectile with higher hit precision, promotes gyro’s performance has immensely affection on trajectory measurement. According to the difficulty in method of MEMS angular rate gyro random error on-line modeling, this paper proposes a new algorithm of recursive least-squares method...

Considering the location demand of radiated noise source in underwater target, the method of location of line spectrum of radiated noise based on passive synthetic aperture method is presented. Line spectrum signal is received using single hydrophone, and azimuth sampling rate depends on the azimuth...

The airborne pod system can reduce the difficulty of power line inspection and enhance the degree of automation for inspection tasks. At the same time it also has a higher requirement of the structure performance of the airborne pod system. Therefore the finite element statics analysis and modal analysis...

The research aims to improve marketing performance as a substantial and positive influence on the relationship between value co-creation and business process agility in Central Java contracting companies. The research approach involved quantitative data collection by sending questionnaires in printed...

In this article, according to the social science and technology development, through continuous improvement of the key technology of modern product design: ergonomics, 3D printing technology, man-machine ergonomic evaluation, etc. to gradually make the product design process more perfect and mature,...

Artificial intelligence (AI)-driven big data analysis, algorithms and computing power introduce new thinking models and decision-making methods for social science research, reconfigure the research paradigm, and thus enhance the depth and breadth of understanding of social phenomena and the laws of social...

The construction of South Jiangsu modernization demonstration area bring an opportunity to build an ecological civilization of Jiangsu, while more reflected in the constraints of environmental system. Based on the system analysis of the introduction of FDI carbon of scale, structure, regulation and technology...

In order to study the effects of mass ratio of steam to biomass (mS/mB) and temperature on the gas composition, a model was developed to simulate the biomass-steam gasification process using Fluent in a fluidized bed. The simulated results showed that the volume fraction of H2 increased firstly and then...

This study shares the results of bibliometric analysis which aims to obtain an overview or mapping of publications in the issue of using speech texts for language learning. As a bibliometric analysis, this research collects data by applying metrics on Publish or Perish (PoP) for publications from the...

In order to improve the level of green manufacturing, advanced manufacturing enterprises usually adopt source control and terminal control.How to choice the way of control is the main content of this paper.The article establishes implementation of green manufacturing strategic decisions evaluation model...

The AB5-type hydrogen storage alloys La0.7Ni2.5Co0.9-xMn0.1Alx were prepared by magnetic induction melting. The structure and the electrochemical properties of alloys were also investigated using X-ray powder diffraction technique and various electrochemical measurements. All the alloys are mainly composed...

The body is surrounded by the surface. These surfaces include parallel plane, vertical plane, oblique plane.The projection feature of Vertical planeis "a slash, two similar shape", the looking and drawing of the similar shape is difficult to understand and easy to make mistakes. This article analyzes...

Thermal pyrolysis of city life garbage gas is an effective means to achieve waste reduction, harmless treatment and resource utilization. However, the particles in the fuel gas has a detrimental effect on its recycling. It must be purified before recycling. The waste gasification gas purification process...

When paint-spraying a batch of small size parts in an assembly line, for some parts with different weights, the speed of sparger device transmission conveyor should keep unchanged in order to ensure the paint-spraying quality and effect. Through analysis and comparison to the structure of throttling...

A set of vehicular farmland information processing system is developed in this paper. System uses the EPCS-8980 ARM industrial control computer and embedded GIS system as the information processing center, take Beidou navigation receivers as positioning tool, and Hall approach switch sensor as unit speed...

A numerical simulation analysis model of the Metal/LTCC (Low Temperature Co-fired Ceramic) substrate vacuum eutectic soldering was built, through the study for the vacuum eutectic soldering process. Then making a thermal-structure coupling analysis for this model to research the residual stress distribution,...

Traditional power supply system with the method of centralized power generation, and then use electricity transmission network transmit electricity to the user. Research model is the basis of the research on the subsequent issue, how to set up a valid practical problems but not entirely confined to the...

In this paper, the temperature, time and pressure of the three process parameters were selected as three control factors of the low temperature co fired ceramic (LTCC) substrate laminating process. By using an L9 (33) orthogonal array which have 9 different process parameters' levels combinations were...

Aimed at the characteristic of nonlinear and non-stationary of pressure drop, in this article a flow regime identification soft sensing method using wavelet-packet combined with probabilistic neural network is put forward. PNN is used as classier due to its good generalization ability and fast learning...

The swift rise of immersive technologies has revolutionised workplace collaboration, setting the stage for augmented reality (AR) to drive team innovation, productivity and virtual co-working spaces. Previous research has examined the promise of AR but most research corroborating AR, or investigating...