Search all articles

In this paper, based on complex network theory, a topology model was proposed which is more accord with the nature of wireless sensor network. Actually, each node's actual location is crucial, in addition, the node energy consumption and communication distances between nodes are inseparable, so we tried...

The IEEE 802.16m based broadband wireless access is a brand-new technology to provide high speed and wide range communications for wireless users. However, how to exploit the optimal utilization of the radio frequency bands resource in such networks is a big challenging issue as it covers the radio channel...

In order to improve the result of text dimension extraction, a text dimension reduction method which is based on CHI and TF-IDF is designed and realized. News websites on the Internet provide news articles, through the page analysis based on SVM and application method designed based on CHI and TF-IDF,...

Video Shot segmentation is the key technology in content-based video retrieval and browsing, and which will directly affect the results of video retrieval. In view of the problems that the traditional shot segmentation algorithm is complex, the feature of video frame is not ideal, and the segmentation...

based upon the influence of mine position distribution error, adjacent mine space cannot fulfill the task of actual combat. this paper builds the model of adjacent mine space distribution regularity under two conditions of the same voyage and different voyages. In combination of examples, a series of...

The relay enabled broadband wireless access is based on the IEEE 802.16j standard and acts as a promising technology to construct the next generation high speed metropolitan area networks. However, the link schedule and the relevant resource allocation, which is a key challenging issue in such networks,...

In this article, curve fitting is conducted on the original data of aluminum alloy via matlab. Then, to find out a fitting curve with optimal effect, comprehensive analysis is made on the judgement quantitative index of curve fitting. The wire feed rate of other given current is obtained with such fitting...

Through the analysis on the cases of the transmission line gallop over the years, the meteorological condition and the geographical location have a dramatic effect on the gallop phenomenon. And the conductor gallop can be evaluated by the thresholds of the weather factors and the degree of the terrain...

The engine idle speed control is one of the most important challenges in the engine control fields, essentially the engine idle speed control is a nonlinear, time-varying, complex and uncertain dynamics control problem, the present study the idle speed control problem for improve the gasoline engine...

The modeling method is commonly used in the simulation of engine at home and abroad, the engine which is used for auto control and performance analysis model. It includes static and dynamic modeling methods, such as engine nonlinear autoregressive model, the average model, the chart model and hybrid...

With the development of power electronic technology, harmonic load is one of the main reasons for damage to the power quality of the limited capacity power system. Firstly, the functional requirements of harmonic load model in the three-phase four-wire isolated power supply system are carried out according...

A gray level image segmentation algorithm is proposed based on Average Intensity Project (AIP) and shift Gaussian model for gray level images with connection between thread and area with similar gray level. The evaluation is performed on 30 gray level images, and the results show area overlap measure...

this article describes a method of general data interface’s design and implementation based on IEC 61850. This method puts interface data of communication and other function components in real-time database of the equipment, which also sets up a mapping method of the correlation of IEC 61850 and real-time...

In debugging and testing process of the intelligent substation process level intelligence unit ,it need to build multiple sets of test environments, with the wiring complexity and low efficiency. For this case, we design of a portable intelligent substation testing device based on PXI bus, describe the...

This paper deals with a DC-micro-grid with renewable energy and conventional energy. In the DC microgrid system, it is a key problem to keep balance between supply power and demand power. Based on the analysis of the operational priority of micro source and load, the priority model of micro source and...

Since conventional methods cannot resolve the complex problem of airborne equipment development, the Hall for Workshop of Meta-Synthetic Engineering for the demonstration of airborne equipment development is built in this paper to improve the scientificity of the demonstration of airborne equipment development,...

To improve the development of informational support of equipment, constructed the logistic support informational system is one of the choice. In order to establish informational system which adapt to the requirement of equipment, how to confirm the business function of logistic support informational...

A four-way micro-strip power divider is proposed in this paper, which has compact structure. During the operation frequency band (2-4GHz), the designed power divider has good performance of impedance matching at five ports and the measured VSWR of each output port are all less than 1.25. The isolation...

At present, most of the high resolution range profile reconstruction methods are based on a single echo signal, without considering the relationship between all the echo signals. In this paper, we consider the sparse feature of echo signal, and propose a method of high resolution range profile reconstruction...

With the shortage of water resources in China, water-saving agriculture has been highly addressed and developed by the government. This paper studies the channel structure of a helical micro pressure drip irrigation emitter, focusing on the tilt and tooth chamfer’s angles within eight different combinations...

With the development of electromagnetic simulation technology, demand for electromagnetic radiation sensor is improving. The reasonable design of transmitter electromagnetic simulation technology has become a key. In this paper, the curved radiator of the electromagnetic radiation field by finite element...

Osteopontin (OPN), as a malignant transformation related protein phosphorylation was firstly completed the extraction by Senger in 1979. With the progress of research on osteopontin (OPN), people found out that there was little amount in the normal tissues that was showed with low expression, however,...

Osteopontin (OPN) is a kind of phosphorylated acidic glycoprotein, human beings' osteoclasts, macrophages, T cells, and vascular smooth muscle cells can secrete OPN, the gene is located on chromosome 4q13. OPN has a function of adhesion to protein, which can be combined with CD44, integrin v 3 and v...

In this paper, two-steps forging is used to manufacture duplicate gear blank. The simulating of the second step forging process is based on DEFORM which is a finite element software. The forming parameter range was determined while the forging force was predicted. Using a set experiment tool of closed-die...

In industrial production, material level control of ball mill are normal operation of ball mill is of great significance. In view of the ball mill run time nonlinear, big inertia and strong coupling characteristic, studied a kind of fuzzy PID based on PLC - 300 ball mill feeding control algorithm, based...

Fast-flux net has been adopted by more and more attackers to build up bot-net, which consists of many proxy-hosts that are changing fast. With this technology, tracing and locating the C&C (control and command) host is more complex and difficult, so that how to identify whether a domain belongs to a...

For capacitor shunt placement the proposed methods do not consider the following conditions; there are few measures and the first compensation points are easily over compensation in distribution networks. So this paper proposes a practical method that can full of utilize the available measures and avoid...

Attribute-based encryption enables users to encrypt and decrypt messages based on user attributes. The computational complexities of decryption are very high. By Outsourcing decryption to the third party, it can address the problem. But the verifiability of results returned from the third party has yet...

Circulating fluidized bed technology is one of the developing direction of clean coal technology which is more reality, and one of the effective ways to solve the thermal power to meet the increasingly stringent environmental requirements. Due to the dynamic process of circulating fluidized bed boiler...

It gives the functional block diagram of the transmitter of the spread spectrum communication (SSC) with the spread spectrum code of Pseudo-Noise code and the modulated way of ASK (amplitude-shift keying), and then realized the common ASK transmitter and the corresponding SSC method on the FPGA (field...

For the problem of space spectrum cannot reserve the original time-domain signal under specific direction after beamforming, a method of primitive signal estimation based on the results of beamforming is proposed. The method proposed is based on the traditional extrapolation, and can be used to estimate...

Based on the variable forward-swept wing configuration, this paper utilizes a variable forward-swept wing mechanism with a double slideway, which makes it possible for the aircraft to switch among orthogonal wing, forward-swept wing and delta wing freely. The general configuration of the variable forward-swept...

Due to the special requirements of the clutch friction plate production, the previous manual operation has been unable to meet the actual production requirements. This paper designs a control system for friction plate forming equipment aiming at different types of automobile clutches, by using the PLC...

With the increase of the capacity of the generator, the electromagnetic force of the stator end winding of turbine-generator is increased, which can lead to the failure of the stator end winding. Based on this report, a finite element modeling method is proposed to solve the problem of complex structure...

Engaging in exploring multi-agent collaboration requires determining how to govern the shared activities. We examine the performance implications of selecting alternate modes of governance in multi-agent alliance relationships. A core set of results in this study relates to the ways in which governance...

With the continuous development and popularity of smart wearable devices, more and more people tend to use the devices to record their health indicators and exercise indicators. Thus a larger amount of indicators called self-health Data is generated all the time. Obviously, it is necessary to process...

The development of an inspection robot for in-service steel tubular poles is described in the article. Based on the design requirement analysis to the steel tubular poles used in China, the design requirement is presented. By compared with the deferent technology, TOFD technique and magnetic wheel are...

The preprocessing of container image is the key to the whole container code intelligent identification system, and the result of treatment directly affects the accuracy of the code area positioning, the character segmentation and recognition. Based on some features of container images such as the color,...

The rough set theory is a theory method. It is about incomplete research, uncertain expression of knowledge and data, knowledge and data discovery. It has been widely used in artificial intelligence, knowledge and data discovery, pattern recognition and classification, analysis and reasoning of imprecise...

In this work, alloy coatings with different Al and Mg content have been prepared on overhead ground wires for Zn-Al-Mg series hot-dip coatings providing good protection on mild steel surface against corrosion. A reinforced thermal stability is confirmed by DSC thermodynamic curves. Furthermore, the enhanced...

For a new diesel engine cylinder head, an assembled finite element model, consisting of cylinder head and cylinder block, is constructed in the present work. By using computational fluid dynamics (CFD) analysis and fluid-solid coupling method, the flow distribution of the water jacket is achieved, as...

The paper analyzed the flow of the diameter of 72mm twin screw extruder screw-type’s field measurement from some machinery co., LTD by FLUENT software. Firstly, through established the flow channel of three-dimensional entity model by Gambit, defined the boundary and completed the meshing simultaneously....

With the great progress of hemoglobin-based blood substitutes, however, they all have a same problem that is hard to get effective stable structure of hemoglobin. The hemoglobin can be oxidized into met hemoglobin in the process of purification, lead to the loss of the function of carrying and transporting...

In EDM, especially in small holes EDM machining, there will be a lot of debris produced which is difficult to remove from narrow gap. If the debris can’t be removed in time, it will affect the machining accuracy and efficiency, and sometimes even unable to complete the processing. In this paper, the...

We propose a novel blind Doppler rate estimator for phase shift keying (PSK) transmissions. The issue may arise in mobile radio links when the received signal experiences non-negligible time-varying Doppler distortion, as in low earth-orbit satellite systems and terrestrial mobile cellular radio systems....

The output of photovoltaic array under uniform light is nonlinear with single peaks. Among the MPPT strategies, The P&O Maximum Power Point Tracking algorithm is mostly used, due to its ease of implementation. However, its main drawbacks are the waste of energy in steady conditions, when the working...

To solve the estimator’s inconsistency in calculating the proposal distribution and the particles degeneracy phenomenon of the Rao-Blackwellized particle filter (RBPF), an improved method of RBPF based on fusing Precision laser pre-observation information particle swarm optimization (PSO) is proposed...

In this paper, using the production system simulation software Plant Simulation to model and simulate an automobile engine block machining line, and then analysis the simulation data. Experimental data shows that the production line program has a strong production capacity and good economic, which can...

In this paper, a new design of a mechanical device based on inertial force is presented. The theoretical analysis and some kinetics equations are established. The dynamic characteristics of mechanical device are greatly influenced by the coefficient of friction during the moving process. Relatively low...

This paper first analyzes the advantages and disadvantages of TF-IDF, which is a traditional algorithm of term weight calculation. Then to overcome the disadvantages of the algorithm, this paper proposes a new method of term weight calculation based on information gain and information entropy, which...