Proceedings of the 2015 International Conference on Material Science and Applications

724 authors
A, Du
Determination of Mesalazine Using Terbium Rare Earth Ions as a Fluorescence Probe
Abdulkadir, Abdulsalam
Fluorescent Biocompatible Tactic PMMA-QDs Thin Films
An, Li-Qiang
Warping Effect to Bend-twist Coupling Characteristics for Box Spar of Wind Turbine Blade
An, Zhi-Yong
Reading Correction of Two-dimensional Electric Rotating-mirror Based on Optical Transmission Matrix
Bai, Zhi-Fei
Melting and Crystallization Behaviors of Poly(lactic acid)/Polypropylene Blends
Bai, Ni
Adsorption and Precipitation of Organic Phosphonates onto the Calcite Stepped Surfaces
Bai, Jian-Hua
The Review of Construction Technologies Using Fuzzy-Ball Workover Fluid in Well C22 and Well F20 of SZ36-1 Offshore Oilfield
Bao, Hui-Qiang
Antioxidant Synergistic Effect and Formulation Optimization of Several Common Natural Pigments
Bao, Zu-Hua
Influence of Heat Treatment on Hot-rolled Sheet Forming of Ti–6Al–4V Alloy
Bi, Da-Sen
Automotive Sheet Metal SAPH440 and Q235 Formability of Comparative Study
Bin, Hao-Yu
Effect of TIG Weld Current on 1Cr18Mn8Ni5N Austenitic Stainless Steel Welding Microstructure and Mechanical Properties
Burns, Jonathan
Corrosion of Permanent Mold Cast Magnesium Alloy AJ62 in Automotive Environments
Cai, Wei
An Experimental Study of the Property of Phase Transition Temperature for Organic Composites Phase Change Materials
Cai, Ying-Jie
Effect of Cationic UV Absorber on Light Fastness Property of Reactive Dye
Cai, Ying-Jie
Conventional and Single-step Pretreatment Process of Cotton Woven Fabric
Cai, Pei-Ling
Study on Histocompatibility and Biodegradability of Polylactic Acid Gel in Rats
Cao, Fei
Photosensitive Hyperbranched Aliphatic Polyester Based on 2,2-dihydroxymethyl Butyric Acid
Cao, Quoc Dinh.
Reverse Reduction Ratio Effect on the Bonding Strength of 7075 Al/AZ31B Mg/7075 Al Laminated Composite Fabricated by Hot Rolling
Cao, Zhuo-Kun
The Manufacturing Technology of Aluminum Foam Material and Some Special Equipments
Chang, Mei-Qi
Facile Synthesis and Luminescence Properties of Silica Submicron Rods
Chang, Meng-Zhou
Tensile Test Performance of Fibre Reinforced SMATed Aluminium Laminates
Chen, Kui
The Cost Reduction Research of GPTMS-Boehmite Transparent and Hard Coating Film
Chen, Hong-Fei
Core/Sheath Structured PVA Micro/Nano Composite Fibers for Biomedical Applications
Chen, Yi-Meng
Establishing and Optimizing AFLP Amplification Reaction System of Shiraia Bambusicola
Chen, S.
Microstructure Evolution Simulation during Microextrusion at Elevated Temperature
Chen, F.
Microstructure Evolution Simulation during Microextrusion at Elevated Temperature
Chen, Yi-Ming
The Influence of Mineral Salt Interface Modifier to Pavement Rubber Concrete Strength
Chen, Dong
A Sensor System to Monitor the Early-Stage Corrosion of A36 Carbon Steel
Chen, Su-Hua
Preparation of Bi2WO6 Nanoparticles with Improved Photocatalytic Properties by Adding Triblock Copolymer P123
Chen, Jie
Facile Synthesis and Luminescence Properties of Silica Submicron Rods
Chen, Liu-Meng
Preparations of Methylphenyldiethoxsilane by One Step Grignard Method and Methylphenylcyclosiloxane by Hydrolysis and Pyrolysis Methods
Chen, Shi-Jian
Preparation of Methylphenylvinyl Raw Rubber by Bulk Polymerization and Ring-Opening Polymerization Methods
Chen, Yi-Wei
Advances on Manufacturing of POSS Reinforced Resin Matrix Composites
Chen, Min-Zhi
Parameters Determination of GTN Model and Damage Analysis of Aluminum Alloy 6016 Sheet Metal
Chen, F.
Reverse Reduction Ratio Effect on the Bonding Strength of 7075 Al/AZ31B Mg/7075 Al Laminated Composite Fabricated by Hot Rolling
Chen, S.
Reverse Reduction Ratio Effect on the Bonding Strength of 7075 Al/AZ31B Mg/7075 Al Laminated Composite Fabricated by Hot Rolling
Chen, Chun-Yu
Adsorption and Precipitation of Organic Phosphonates onto the Calcite Stepped Surfaces
Chen, Xue-Jian
The Comparative Analysis between Truss Aqueduct and Cable-stayed Aqueduct
Chen, Gang
Numerical Simulation on Impacting Experiments of the Projectile Recovery System
Chen, Ze-Li
Determination of the Fluroxypyr Ester by HPLC with Internal Standard
Chen, Tian-Li
Fatigue Strength Research on Aluminum Alloy Car Body for Railway Vehicle Based on Finite Element Analysis Method
Cheng, Yong
Determination of Micro Impurity Element Potassium in Sodium Metavanadate by ICP-OES
Cheng, Li-Jia
Study on Histocompatibility and Biodegradability of Polylactic Acid Gel in Rats
Chenlai, Jia-Cuo
Classifications and Development Frameworks of Tourist Resorts Based on Geospatial Division Theory: A Case Study of Sichuan Province, Western China
Chi, Sen
An Analysis of Microscopic Morphology and Organization of 1Cr18Ni9Ti
Chi, Shu-Heng
Preparation, Linear Spectrum and Nonlinear Two-photon Absorption Properties of Fluorenone Derivative Containing 4-Methoxystyrene
Cui, Tai-Song
Parameters Determination of GTN Model and Damage Analysis of Aluminum Alloy 6016 Sheet Metal
Cui, Shi-Bao
Reading Correction of Two-dimensional Electric Rotating-mirror Based on Optical Transmission Matrix
Cui, Li-Hua
Nano-TiO2/Chitosan Coated Antibacterial Paper and Its Preservation Effect in Packaging Nanguo Pear
Dai, Li-Xing
Core/Sheath Structured PVA Micro/Nano Composite Fibers for Biomedical Applications
Dai, Xiu-Qian
The Preparation of ZnO/AC Composite Photocatalytic Material for Coking Wastewater Treatment
Dai, Li-Xing
Preparation of Polyimide Films Derived from a Novel Precursor Pre-imidized Poly (amic acid) Ammonium Salt
Dai, Jun
The Design of Bullet Train Process Bogie and the Finite Element Analysis of Frame Strength
Deng, Hong-Yu
The Influence of Reinforcement Ratio to the Mechanical Behavior of Reinforced Concrete Column
Deng, Wen-Chang
Study on the Photosynthetic Efficiency of the Dracontomelon Duperreanum Leaves by Using Photo-acoustic Tomography Spectroscopy
Diao, Gui-Qiang
Analysis of pH Dependent Luminescence of an Europium Complex
Ding, Xiu-Juan
Development of Novel Inorganic Antibacterial Material
Ding, X.Y.
Microstructure Evolution Simulation during Microextrusion at Elevated Temperature
Ding, Xiao-Heng
Study of Heat Flux Sensor Test Containing Metal Phase Change Heat Sink
Ding, Yu-Mei
Research on the Effects of Different Types of Materials on Micro-membrane
Dong, Kang-Cheng
Iron-based Powder Metallurgy Steel Collar Chemical Treatment Process Test
Dong, Hong-Xia
Effect of Post-processing on Photoluminescence and Surface Composition of Porous Silicon
Dou, Qiang
Melting and Crystallization Behaviors of Poly(lactic acid)/Polypropylene Blends
Du, J.
The Vacancy-hardening Properties in Water-quenched Fe-Al Alloys
Du, Jing
Photosensitive Hyperbranched Aliphatic Polyester Based on 2,2-dihydroxymethyl Butyric Acid
Du, Shuang-Ming
Diffusion Bonding of Magnesium Alloy (AZ31B) to Cu by Using Sn Foil Interlayer
Du, Rong-Yi
Traffic Flow Registraton for Unmanned Aerial Vehicle Detection
Du, Chen-Xi
Experimental Study on Pretreatment of Preparing Phosphorus Building Gypsum with Yunnan Phosphogypsum
Duan, Mao-Chang
Investigation of High Efficiency SIMPLE Algorithm Based on Single Staggered Grid for Sewage Treatment System
Fan, Kun
Effect of Post-processing on Photoluminescence and Surface Composition of Porous Silicon
Fang, Hua
Experimental Research on Mechanical Properties of Fiber Reinforcement Cement Stabilized Soil
Fang, Feng-Rong
Application of Hydroxamic Modified Calix[6]arene for Selective Extraction of Uranium (VI)
Fang, Bo
Design of Smart Home System Based on Service Encapsulation and Device Abstraction
Feng, Ying
Synthesis and Photocatalytic Activity of M–doped CaBiO2Cl (M = Ag, Co, and Ni) under Visible Light
Feng, Zhen
Fatigue Strength Research on Aluminum Alloy Car Body for Railway Vehicle Based on Finite Element Analysis Method
Fu, Yu-Xia
Research on the Dynamics of Red Tide Algae Density Evolution Mechanism and Control
Gao, Hong-Bing
Determination of Mesalazine Using Terbium Rare Earth Ions as a Fluorescence Probe
Gao, Jun-Shan
Study on Synthesis and Self-assemble Nano-materials of Tetra-substituted Phenoxy Nickel Phthalocyanine
Gao, G.D.
Hot Compression Behavior of Al-Zn-Mg Aluminium Alloy: Experiments and Simulations
Gao, Qun
Nanocomposite Reinforcement Effects in Millable Polyurethane Elastomer with Low Content of Halloysite Nanotubes
Gao, Qun
Modification of Regeneration Polyurethane by Blend with Ternary Nylon
Gao, Qun
Research on the Properties of Rigid Polyurethane Foam with Heteroaromatic Polyol
Gao, Qun
Effect of Nano-ZrO2 on Properties of Room Temperature Vulcanization Phenyl Silicone Rubber
Gao, Shi-Zhe
A Study of Preparation and Performance of the PCMs of the CA-LA Swelling Vitrified Beads
Gao, Feng
Investigation of High Efficiency SIMPLE Algorithm Based on Single Staggered Grid for Sewage Treatment System
Gao, Yan
Simulation Study of Phase Demodulation in Resonance Band for Gear Tooth Cracking Fault Detection
Gao, Qun
Study on the Properties of Nano-Al2O3/Phenyl Silicone Rubber Composites
Ge, Rui
The Application of High Efficient Fatigue Testing Method on Engineering Machinery Steel
Ge, Ying-Fei
Cutting Force Investigation when Heavy Milling Welded Aluminum-Thin- Walled Hollow Structure
Gong, Zhong-Ping
Determination of Mesalazine Using Terbium Rare Earth Ions as a Fluorescence Probe
Gong, Xiao-Ling
Effect of Cryogenic Treatment on Film-substrate Bonding Strength of DLC Film/High-speed Steel
Gong, Bing
Nanocomposite Reinforcement Effects in Millable Polyurethane Elastomer with Low Content of Halloysite Nanotubes
Gong, Peng-Han
A Research on the Application of MTI in Motion Parameters Measurement on Human-rifle System
Groff, Steve
A Sensor System to Monitor the Early-Stage Corrosion of A36 Carbon Steel
Gu, S.Y.
The Vacancy-hardening Properties in Water-quenched Fe-Al Alloys
Gu, Jiang
The Structure and Electronic Properties of C80 Carbon Nanotube
Guo, Hong-Bao
Calculation on Tensile Strength of Notched 2D Woven C/SiC Composite Laminates-Considering the Nonuniformity of Material
Guo, Chang-Qing
Microstructures of Surface Alloyed High Manganese Cast Steels
Guo, Wei-Gang
Lubrication Simulation and Solution of Oil Film Force and the Equilibrium Position of Three-lobe Journal Bearing
Guo, Pei-Tao
Effects of Dimethyl Formamide on Laser-induced Damage to SiO2 Films Prepared by the Sol-gel Method